New Products Flash Sale
Thread Tools
Old Nov 27, 2012, 03:55 AM
glassfox is offline
Find More Posts by glassfox
glassfox's Avatar
Hi, Fajar,
it's ok, take your time ,
and thank you for the comments on Foxtech,
I attached some working progress photos here,
starting shipping the Glyder 600 now,
but we ordered a bigger box than necessary.
so you may find a lot of foam balls in the package.
Site Sponsor
Sign up now
to remove ads between posts
Old Nov 27, 2012, 04:12 AM
panos2408 is offline
Find More Posts by panos2408
DXL Team Pilot FuriusP
panos2408's Avatar
Something off topic guys.... I requested a new Forum regarding video post production here

If you would like something like this vote up for it. Cheers.
Old Nov 27, 2012, 06:08 AM
Tetley is offline
Find More Posts by Tetley
AKA 3DJIM
Tetley's Avatar
FU,

I see all the motor wires are short and have connectors on them, will these have enough wire to run around the frame? my other Tiger motors came with plenty of wire on them for a multi?. Also are these wires crimped or soldered?

Kind Regards

Jim.
Old Nov 27, 2012, 07:09 AM
panos2408 is offline
Find More Posts by panos2408
DXL Team Pilot FuriusP
panos2408's Avatar
I am also wondering how to go ahead with a clean Power distribution on the frame... Was thinking sime like the Ecilop which has a main cyclic wire that picks up power from all esc's and deliver it to the battery... I was going to buy it but 75 USD is really a lot of money for a wire...
Old Nov 27, 2012, 07:25 AM
x2001 is offline
Find More Posts by x2001
Registered User
I think it's for putting ESC directly under the motor like DJI S800
Old Nov 27, 2012, 07:34 AM
glassfox is offline
Find More Posts by glassfox
glassfox's Avatar
actually we cut the wires and soldered connectors on, the connector can be linked reversed to change motor rotation direction easily,
yes, we did mean to put the ESC under the propeller for enough cooling.
thanks
Fu
Site Sponsor
Old Nov 27, 2012, 07:35 AM
glassfox is offline
Find More Posts by glassfox
glassfox's Avatar
Quote:
Originally Posted by panos2408 View Post
I am also wondering how to go ahead with a clean Power distribution on the frame... Was thinking sime like the Ecilop which has a main cyclic wire that picks up power from all esc's and deliver it to the battery... I was going to buy it but 75 USD is really a lot of money for a wire...
Hi panos,
do you mean something like this ?
http://www.foxtechfpv.com/power-dist...tor-p-595.html
Site Sponsor
Old Nov 27, 2012, 09:00 AM
panos2408 is offline
Find More Posts by panos2408
DXL Team Pilot FuriusP
panos2408's Avatar
No the idea was to have a wire going around the square main frame and possibly have connections so that the ESc's can connect onto it... Something Similar to what Aleksey did with his Ecilop. This will take the space on the bottom side which is basically useless for mounting things not to mention maybe inside CF tubes
Last edited by panos2408; Nov 27, 2012 at 09:15 AM.
Old Nov 27, 2012, 09:19 AM
panos2408 is offline
Find More Posts by panos2408
DXL Team Pilot FuriusP
panos2408's Avatar
By the way are those black extensions of the landing gear adjustable just in case they get within the field of view of the camera? If they are hats off
Old Nov 27, 2012, 09:54 AM
glassfox is offline
Find More Posts by glassfox
glassfox's Avatar
Quote:
Originally Posted by panos2408 View Post
By the way are those black extensions of the landing gear adjustable just in case they get within the field of view of the camera? If they are hats off
well, seems a retracting landing gear mod is a good idea?
normally you don't see the landing skid in the video.
you can do modification on the landing skid if necessary too.
Site Sponsor
Old Nov 27, 2012, 10:29 AM
panos2408 is offline
Find More Posts by panos2408
DXL Team Pilot FuriusP
panos2408's Avatar
Retract i don't think so unless you plan on a mod for a 3 axis gimbal on the frame... However having adjustable length of the legs on the bottom would be nice idea. But let's see if it is needed first.. I am pretty sure gopro will be affected since it has a wide field of view but i am not gonna use one so personally I am not worrying.
Old Nov 27, 2012, 10:37 AM
tycoyoken is offline
Find More Posts by tycoyoken
Registered User
Quote:
Originally Posted by panos2408 View Post
Retract i don't think so unless you plan on a mod for a 3 axis gimbal on the frame... However having adjustable length of the legs on the bottom would be nice idea. But let's see if it is needed first.. I am pretty sure gopro will be affected since it has a wide field of view but i am not gonna use one so personally I am not worrying.
Something like this would be great, they called that "Retractable Landing Gear"...

Self-made ​​s800 retractable landing gear.
https://www.rcgroups.com/forums/show...2#post23375597
자체 개발 S800 Retractable Landing Gear (NOT DJI'S PRODUCT!!!) DJI제품 아님 (0 min 44 sec)


DJI ​​s800 retractable landing gear
http://www.dji-innovations.com/produ...skid/overview/
DJI - S800 Landing Gear (0 min 21 sec)
Old Nov 27, 2012, 11:07 AM
panos2408 is offline
Find More Posts by panos2408
DXL Team Pilot FuriusP
panos2408's Avatar
Yes i am aware of this and it isn't really rocket science for diy... Just 2 servos that will lift the gear up... Glyder600 can accomodate this mod very easy.... But why? This only helps if you have a 3axis mount and a camera operator and as far as i am aware it will be hard to have a functional stadi 3 axis gimbal...
Last edited by panos2408; Nov 27, 2012 at 11:14 AM.
Old Nov 27, 2012, 12:31 PM
jy0933 is offline
Find More Posts by jy0933
James not bond
jy0933's Avatar
Quote:
Originally Posted by glassfox View Post
milouze is correct,
Glyder 600 is not an innovation , it's a new design with military standard material and many fly tests.
the main point is, glyder 600 is the only frame made in China comes with a patent agreement with ECILOP designer.
and FOXTECH never ignores others invention.



I don't like to talk about other's product, but think twice to use a cheap frame to carry very expensive cameras.
even ABLomas argues in the mini 650 thread about the material they used , looks like carbon, but it's fiber glass.....
and the MR 's credit is not very good in China,
when you crash, you have to wait 1 month or more for spare parts.
so much for now

i like figuring out if people are lying (or deliver misinformation)


here's the mail from Ecilop team
Old Nov 27, 2012, 02:16 PM
ibbe76 is offline
Find More Posts by ibbe76
Registered User
Hello, how is the two gyros gain cable connect?
Last edited by ibbe76; Nov 27, 2012 at 03:53 PM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Foxtech 5.8ghz Vtx/Vrx & Sony 600 TVL cam Viper82 FPV Equipment (FS/W) 6 Jun 07, 2012 06:32 PM
Discussion FH-X46 new quadcopter and hexacopter controller from FOXTECH glassfox Multirotor Talk 730 Apr 30, 2012 08:14 AM
Discussion Quadcopter, where to start? Ischim0n Coaxial Helicopters 1 Apr 12, 2012 07:30 AM