FOXTECH Glyder 600 Quadcopter, Ready for shipping!
Glyder 600 is a special quadcopter frame with the best self-balancing gimbal in the world
( working principle based on ECILOP(ECILOP.TV, Aleksey)). It features strong structure,Fully suspended gimbal,
3-stage shock absorbing system ,adjustable cam mounting plate and counter weight position,
detachable landing gear and other cool features.
While using this frame ,the battery acts like a counter weight to the camera ,
so its Inertia makes the gimbal stabilize itself, apart from that ,
two gyro controlled servos controls the gimbal make it even more stable.
In most cases, the shock and vibration from the frame are totally isolated from the gimbal due to its special structure,
so a zero-vibration & shock video taking experience can be guaranteed.
max flying weight: depending on the motor and propeller,3-4kg
Material： Aluminum and carbon fiber
1x Glyder 600 frame with gimbal
1x DJI NAZA controller(Optional adding a NAZA GPS)
4x T -motor 2216 KV800 motor
4x Hobbywing 30A ESC
4x 1038 Carbon Fiber Propeller
2x 27g metal gear digital servo
Preorder enjoys 14% discount on the frame .
http://www.foxtechfpv.com/glyder-600...set-p-694.html (With DJI NAZA)
http://www.foxtechfpv.com/glyder-600...set-p-735.html(No main controller)
Full PNP version:
http://www.foxtechfpv.com/glyder-600...set-p-695.html (Only need to add Radio and battery)
Final look of Glyder 600:
Carbon fiber tube
7075 Aluminum Frame
New shock absorbing springs and screws.
Note: The following photos contains old version fly test photots.
All parts in the prototype frame
If you had any question, please feel free to leave it in this thread.
or contact us by "live chat"
or Write emails:
Technical support: firstname.lastname@example.org (Alex Liu)
Distributor inquiry: email@example.com (Fu Xing)
ImagesView all Images in thread
Last edited by glassfox; Dec 26, 2012 at 08:50 AM.
it can carry a camera less than 400g
you can use up to 12inch propeller on this frame.
we offer a setup of T MOTOR 2216+ 1038 propeller.
acceptable efficiency, stable fly performance.
The Raw video looks very stable good work on the frame. It would be nice if it could accomodate a small fpv camera without many mods since most of the new Mirrorless dslrs do not offer av out option.
It would be nice to list some weight ratios between battery and camera in order to achieve some nice stabilisation.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Sold||Foxtech 5.8ghz Vtx/Vrx & Sony 600 TVL cam||Viper82||FPV Equipment (FS/W)||6||Jun 07, 2012 06:32 PM|
|Discussion||FH-X46 new quadcopter and hexacopter controller from FOXTECH||glassfox||Multirotor Talk||730||Apr 30, 2012 08:14 AM|
|Discussion||Quadcopter, where to start?||Ischim0n||Coaxial Helicopters||1||Apr 12, 2012 07:30 AM|