Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Dec 26, 2012, 04:23 PM
Andre6553 is offline
Find More Posts by Andre6553
Vulcan skyhook multirotor
Andre6553's Avatar
Quote:
Originally Posted by crazyj View Post
Nothing fancy, just 3.02.0.

BTW, I was able to shoot a single 1080 60fps video today for 50 minutes straight! The camera still had battery left and it was hot but still not nearly as hot as my old camera.

Was wifi on or off?
Sign up now
to remove ads between posts
Old Dec 26, 2012, 08:09 PM
speedstep is offline
Find More Posts by speedstep
Registered User
I thought I share this one.
90% of the footage is hero 3 black
10% is hero 2
FPV Rig was my TBS Disco

Almost all the aerial footage is 1080 60fps and jello is pretty much not existing, just in a couple of shoots with the hero 2
The slow-motion is all 960 or 720 with 100 or 120fps

Enjoy:

Quad n' Kite FPV ROO Kitesurfing (3 min 4 sec)
Old Dec 26, 2012, 08:27 PM
SDSURFnGLIDE is offline
Find More Posts by SDSURFnGLIDE
Multi rotors=No Paycheck left
SDSURFnGLIDE's Avatar
Quote:
Originally Posted by speedstep View Post
I thought I share this one.
90% of the footage is hero 3 black
10% is hero 2
FPV Rig was my TBS Disco

Almost all the aerial footage is 1080 60fps and jello is pretty much not existing, just in a couple of shoots with the hero 2
The slow-motion is all 960 or 720 with 100 or 120fps

Enjoy:

http://www.youtube.com/watch?v=wxQzin3wUhI

Dude....that was really cool...great job.
Old Dec 26, 2012, 08:28 PM
bakchos is offline
Find More Posts by bakchos
WannaBeLikeJoshTheSlowJet
bakchos's Avatar
Love that video
Old Dec 26, 2012, 08:44 PM
saucisse is offline
Find More Posts by saucisse
Don't disturb the pilot !!!
saucisse's Avatar
speedstep: that was awesome!
Old Dec 26, 2012, 08:52 PM
carguy1994ca is offline
Find More Posts by carguy1994ca
I tell her RC is cheap !
carguy1994ca's Avatar
Quote:
Originally Posted by SDSURFnGLIDE View Post
Dude....that was really cool...great job.
+ 1
Old Dec 26, 2012, 09:54 PM
Deadstick 8409 is offline
Find More Posts by Deadstick 8409
Registered User
Deadstick 8409's Avatar
Speed, that was some of the best FPV footage I have seen. Nice job.
Old Dec 26, 2012, 10:30 PM
MacGuy22 is offline
Find More Posts by MacGuy22
Registered User
After repeating the frustrations others had formatting a 64 GB card on a PC, I had success on a Mac. The trick was to format the card with it installed in the GoPro Hero3, connected to the Mac by a mini USB cable. DiskUtil recognizes the full ~64GB space on the SD card. When you partition, be sure to use the Master Boot Record (not GUID option) with the exFat format. We successfully made recordings that were visible on the Mac.

The bad news is that our Windoze XP system doesn't recognize the GoPro. It isn't clear to me whether the bug is in Windoze XP or the firmware or the GoPro Hero 3.

I'm helping a friend. Now that I've done my good deed for the day, I'm going to delete my account.
Old Dec 26, 2012, 10:48 PM
AlanGold is offline
Find More Posts by AlanGold
Registered User
AlanGold's Avatar
Very impressive.
Old Dec 26, 2012, 10:58 PM
flohio117 is offline
Find More Posts by flohio117
DroneWorksUSA.net
flohio117's Avatar
@speedstep what setting on your hero 3 were you shooting with?
Old Dec 26, 2012, 11:10 PM
speedstep is offline
Find More Posts by speedstep
Registered User
Thank you all for the kind comments, means a lot to me! I appreciate it!


Quote:
Originally Posted by flohio117 View Post
@speedstep what setting on your hero 3 were you shooting with?
The aerial footage was all taken 1080 60fps (w/o pro tune)
the slowmo was 720 120fps or 960fps 100fps (w/o pro tune)

With protune the cam always frooze after 8 seconds or a bit later, even though I got the "go pro approved" 32gb sandisk
I got now the new firmware but haven't checked if it works now.
Old Dec 26, 2012, 11:35 PM
flohio117 is offline
Find More Posts by flohio117
DroneWorksUSA.net
flohio117's Avatar
Thanks can you change the field of view to medium on 720p?
Old Dec 27, 2012, 12:07 AM
speedstep is offline
Find More Posts by speedstep
Registered User
Quote:
Originally Posted by flohio117 View Post
Thanks can you change the field of view to medium on 720p?
No but I always use 1080 medium 60fps
You just need well balanced motors, props and more dampening.
I use a silicon matt from vibrationmount.com and foam pads is pricey does a good job'
Old Dec 27, 2012, 12:25 AM
AlanGold is offline
Find More Posts by AlanGold
Registered User
AlanGold's Avatar
Quote:
Originally Posted by speedstep View Post
No but I always use 1080 medium 60fps
You just need well balanced motors, props and more dampening.
I use a silicon matt from vibrationmount.com and foam pads is pricey does a good job'
If you ever can see the way to posting pictures that show how you dampen vibration and the specific products used I'll be very interested. (Vibrationmount.com has a lot of links to numerous companies and products)

I am new to this and have only been using a small p&s on test videos with my Discovery. I have tried a few different approaches (including a $15 sticky gel material) and still get jello when the camera is mounted on the front.

My GoPro 3 Black will be here soon so maybe it will work better than my p&s or maybe I'll need to work more on the dampening.

Do you use any stabilization processing software such as Mercalli 2?
Old Dec 27, 2012, 01:06 AM
jcmonty is offline
Find More Posts by jcmonty
Registered User
Quote:
Originally Posted by AlanGold View Post
If you ever can see the way to posting pictures that show how you dampen vibration and the specific products used I'll be very interested. (Vibrationmount.com has a lot of links to numerous companies and products)

I am new to this and have only been using a small p&s on test videos with my Discovery. I have tried a few different approaches (including a $15 sticky gel material) and still get jello when the camera is mounted on the front.

My GoPro 3 Black will be here soon so maybe it will work better than my p&s or maybe I'll need to work more on the dampening.

Do you use any stabilization processing software such as Mercalli 2?
Alan,

I finally got rid of all signs of jello on my TBS with the hero 3 blk @1080p 60fps. I am flying some FPV over the ocean tomorrow and can post some videos. I will be trying some of the other settings as well.

I have a layer of sorbothane, g10 plate, soft ear plugs then gopro with a loose rubber band. I also threw a polarizing filter under the lens cover, which seems to help.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold *SOLD* NIB GoPro HD Hero 2 Motorsports Edition plus NIB GoPro Wifi Combo Kit. jbj620 FPV Equipment (FS/W) 2 Jun 11, 2012 12:54 PM
Discussion FPV using GOPRO HD Hero 2 + bacpac WIFI Link69 Multirotor Talk 4 Feb 26, 2012 08:24 PM
Build Log HD FunJet v2 (mini) build log with GoPro HERO HD jbpilot FPV Talk 14 Oct 31, 2010 10:36 AM
Cool GoPro HD Hero Wide - 6.3 oz HD video camera nemo_uk Aerial Photography 5 Sep 27, 2009 10:40 AM