2.4GHZ 100mW Tx/Rx WITH 1/3-inch SONY CCD Camera NTSC
I originally bought this setup a few weeks ago for FPV video and aerial photographs with a Quadcopter. Unfortunately my Quad project never got off the ground so I am selling this setup complete with the camera mounting assembly that I bought seperately as well. These items are BRAND NEW sealed in their package. Due to the nature of this hobby, they are sold as is - no returns or refunds.
Comes with everything as pictured but please note that the Camera Mount does not come with the Servos as pictured (This is how it is sold). I have included that picture to show how it is assembled and works with the servos.
$75 SHIPPED PRIORITY MAIL - CONUS! PAYMENT VIA PAYPAL
Fast shipping via USPS Priority Mail with tracking number. I ship within 24 hours! A smoke free home. No returns or refunds - sold as is due to nature of hobby. Thank You!
Features and Specifications
12 Channel Tx/Rx video system with CCD camera.
The camera uses a quality glass lensed SONY CCD camera system.
Unlike other generic systems, we have produced a wiring loom and included it with the camera so that the Tx and camera will be compatible and on the same voltage.
If you buy your camera and Tx seperately the plug polarity and voltages may be very different.
1 x SONY CCD 1/3inch Camera
1 x 2.4GHz 4 channel Video Transmitter (100mW)
1 x 2.4GHz 12 channel Video Receiver
CCD sensor type:1/3 color SONY CCD
NTSC: 510(H)*492(V) (Included)
Scanning system: Interlaced scanning
Horizontal resolution: 520TV line
Minimum Illumination 0.01LUX/F1.2
S/N Ratio: 48dB
Gamma Modification: 0.45
White balance: Auto
Auto backlight compensation: Auto
Input voltage: 9~12.6V
Electric current 80MA
Electronic Shutter: 1/50 (60) ~ 1/100,000s
Video output: 1.0VP-P composite video
Operation Temp.: -20~50
Flight time: Approx 60min/100mah 3S
FPV Tx Spec.
Channel: 4-Ch, AV synchronization
Input voltage: 8~12V
Frequency: 2.4G 2.410G/2.430G/2.450G/2.470G
Light weight and easy to install.
Kit includes bearings, screws, ball/socket, threaded rod and pre-cut fiberglass board.
Camera Mount plate size: 28x26mm
Servo type required: 5~10g
Last edited by momofx; Oct 15, 2012 at 01:54 PM.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Sold||900MHZ 800mW Tx/Rx & 1/3-inch CCD Camera NTSC PLUS MORE!||Pantseatflyer||FPV Equipment (FS/W)||6||Feb 29, 2012 03:01 PM|
|Sold||900MHZ 1500mW Tx/Rx & 1/3-inch CCD Camera NTSC||mkatzapov||FPV Equipment (FS/W)||6||Feb 13, 2012 01:56 PM|
|Sold||900MHZ 200mW Tx/Rx & 1/3-inch CCD Camera||ddierking||FPV Equipment (FS/W)||1||Jan 03, 2012 01:45 AM|
|Sold||900MHZ 100mW Tx/Rx & 1/3-inch Sony CCD Camera NTSC||daskip87||FPV Equipment (FS/W)||2||Sep 16, 2011 09:49 AM|
|Sold||2.4GHZ 100mW Tx/Rx & 1/3-inch CCD Camera NTSC||tallflyer||FPV Equipment (FS/W)||2||Jan 15, 2011 01:40 PM|