Thread Tools
Oct 13, 2012, 02:22 PM
LNLP
Discussion

Right Retract on Dynam A-1 Skyraider Closes Half Way


Fellows, my right retract worked fine first two cycles--now I notice that the
stainless steel pin which projects half inch out of the strut near the base does not
turn when closing the retract ( pin prevents the retract from closing). Have
enclosed a picture. HOW DO I FIX THIS PROBLEM? I know nothing about
retracts.

Also, some how or other when I opened the right retract the third time, I spotted
two little magnets stuck on the metal plate at the base of the retract. They don't
exist on the left retract. Where do they go?

any help would be appreciated,

LNLP
Sign up now
to remove ads between posts
Oct 16, 2012, 09:09 PM
Hope to get out of life alive
kenh3497's Avatar
If the left retract is working like it should, make all the parts and pieces of the right retract look the same. It should work then.

If not call the mfg for some help.

Ken
Oct 17, 2012, 03:54 PM
Redacted per NSA "suggestion"
dedStik's Avatar
Dynam retracts stink, you would do well to replace the stock ones with something a bit more reliable.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion New Dynam 1.2m Spitfire, EPO, Retracts, Flaps jbc Electric Warbirds 3496 Jun 13, 2017 06:38 AM
Discussion Dynam A-1 Skyraider Right Retract Closes only Half Way LNLP Foamies (Scratchbuilt) 0 Oct 13, 2012 02:11 PM
Discussion Right Retract on Dynam A-1 Skyraider Closes Half Way LNLP Electric Plane Talk 0 Oct 13, 2012 02:01 PM
Discussion Problems with my 1.6 meter A-1 Skyraider: one missing part and one defective part Thomas B Banana Hobby 5 Jun 04, 2012 11:29 PM
Ecalc is WAY off on amps, but right on everything else realdeal Electric Plane Talk 5 Apr 30, 2001 01:06 PM