Thread Tools
Old Oct 14, 2012, 12:08 PM
ken_nj is offline
Find More Posts by ken_nj
GSMB Member
ken_nj's Avatar
No I don't Tim. But he works fast.
Sign up now
to remove ads between posts
Old Oct 14, 2012, 02:31 PM
shipcollector5 is offline
Find More Posts by shipcollector5
Registered User
What a wonderful boat thanks for sharing
Old Oct 14, 2012, 08:43 PM
ken_nj is offline
Find More Posts by ken_nj
GSMB Member
ken_nj's Avatar
The next few pictures in the series cover running hardware. Motor bracket, gears and stuffing boxes. Check out the gears that he used. Everything looks like its well mounted. For his props I saw on most of his boats he adds a slot in the prop which engages a pin in the shaft. He makes his own lock nuts for the props. I think on some he might have a pin through the shaft to lock the nut.
Old Oct 15, 2012, 08:43 PM
ken_nj is offline
Find More Posts by ken_nj
GSMB Member
ken_nj's Avatar
The next five pictures looks like he was working on the motor mounts and building the faux gas engines that will be used to cover the electric motors.
Old Oct 16, 2012, 06:16 AM
alex111 is offline
Find More Posts by alex111
Registered User
alex111's Avatar
nice looking boats there
Old Oct 16, 2012, 10:46 PM
MILLERTIME is offline
Find More Posts by MILLERTIME
Taking care of the pond.
MILLERTIME's Avatar
Amazing work.
Old Oct 16, 2012, 11:10 PM
ken_nj is offline
Find More Posts by ken_nj
GSMB Member
ken_nj's Avatar
Back in post #25, the picture that Tim B reposted, I did not know what those thin strips were for, my lack of knowledge on wooden boat building. I was corrected by frankg at our club meeting tonight, they are ledger strips, thanks Rich!

We are getting near the end of the photos that I have.

Here he has the running hardware mounted. Boat looks really good with all that lumber showing. To bad it gets covered up!

Note: If you don't know this... When you click on a picture and get the slide show, if you click on the picture again, it opens in a solo window. Click on the picture again and you might, should, get a larger view.
Old Oct 16, 2012, 11:18 PM
Tim B. is offline
Find More Posts by Tim B.
Registered User
Tim B.'s Avatar

Lucky to have this documentaion ...


Quote:
Originally Posted by ken_nj View Post
We are getting near the end of the photos that I have.
Sad to be almost done but So lucky to have these pics...
Old Oct 16, 2012, 11:49 PM
ken_nj is offline
Find More Posts by ken_nj
GSMB Member
ken_nj's Avatar
Glad you enjoy them Tim. Others must be enjoying them as well, the pictures are getting an awful lot of views, not so many comments.
Old Oct 16, 2012, 11:57 PM
green-boat is offline
Find More Posts by green-boat
Boats on the brain!!
green-boat's Avatar
We are all just in aw.
Old Oct 17, 2012, 01:04 AM
Kmot is offline
Find More Posts by Kmot
Grumpa Tom
Kmot's Avatar
The fact that he was an artist, an art teacher, really shows in his work. Because these photos show a piece of artwork being created, in the fullest sense of the word.
Old Oct 17, 2012, 07:43 PM
ken_nj is offline
Find More Posts by ken_nj
GSMB Member
ken_nj's Avatar
Looks like we have some rudder hardware assembly. Some woodworking on the forward deck and wood for the cabin structure.
Old Oct 17, 2012, 08:10 PM
Tim B. is offline
Find More Posts by Tim B.
Registered User
Tim B.'s Avatar
Quote:
Originally Posted by ken_nj View Post
Glad you enjoy them Tim. Others must be enjoying them as well, the pictures are getting an awful lot of views, not so many comments.
This is genuis level engineering talent and tremendous artitstic ability.

It also sounds like he was a humble man as well, so all these things together make it sound like meeting him would have enriched my life Greatly.
Old Oct 18, 2012, 11:47 AM
ken_nj is offline
Find More Posts by ken_nj
GSMB Member
ken_nj's Avatar
Some deck construction and installing the faux gas engines which cover the electric motors. Pictures 3-5 look like lighting for the dashboard, my guess.

For picture #6 of the deck area. Note the joints on the wood deck structure, the exhaust pipes coming from the engines with hose clamps, in the upper left a drain for the deck. I'm guess to port and starboard of the servo is the gas tanks. Detail that would not be normally seen. So in every detail the looks like a real boat? Wouldn't you say so?
Old Oct 18, 2012, 01:16 PM
Aerominded is offline
Find More Posts by Aerominded
Registered User
Quote:
Originally Posted by ken_nj View Post
...looks like a real boat? Wouldn't you say so?
Absolutely!
Last edited by Aerominded; Oct 18, 2012 at 01:31 PM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Garden State Model Boaters ken_nj Dock Talk 180 Sep 21, 2015 06:17 PM
For Sale Dave Patrick Models Edge 540 HiTimeRCer Aircraft - Fuel - Airplanes (FS/W) 0 Jul 27, 2012 04:13 PM
Question Empire State Model Mariners Band1 Site Suggestions / Complaints 3 Jul 12, 2012 04:21 PM
Question Model Shops in the States Guizzo 17 Vintage & Old-Timer Designs 7 May 28, 2012 07:12 AM
Gallery Fun Run with the Garden State Model Boaters frankg Scale Boats 10 Sep 02, 2008 03:15 PM