Thread Tools
Oct 08, 2012, 09:08 PM
Registered User
Discussion

Will an 11V 3s Lipo Fry This Motor?




It's brushed from a 1/10 Scale RadioShack Hummer H2

as seen here
Hummer H2 Radio Shack 2006 (0 min 34 sec)



When I use a 3s 11v it's hella fast!

The default battery is 7.2V

It gets really hot with 3s and I've only used it for three minutes just to test, but is there a chance that the big motor will fry If I fully use the 3s?
Sign up now
to remove ads between posts
Oct 08, 2012, 10:51 PM
bashing on vancouver island
veggieslinger's Avatar
it will eventually fry. if the motor mount is plastic, (which i bet it is) you run the risk of warping the motor mount because of too much heat. it is risky to say the least.
Oct 09, 2012, 01:09 PM
Registered User
wparsons's Avatar
You also have to consider the potential for damage to the circuit board... it wasn't designed for that much voltage or amperage.
Oct 11, 2012, 03:33 PM
Obeying the law of gravity
Jeremy Kamutzki's Avatar
yup... you would be better off with a 2s lipo, which is still able to provide alot more current than the stock nimh/nicd


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Can THIS motor work with THIS plane? If not-can you show me an ARF that will work? zdsweet Electric Plane Talk 2 Jul 24, 2009 09:44 PM
Found 3s 11v 3000-3400 lipo 20c dave3913 Aircraft - Electric - Batteries & Chargers (FS/W) 2 Apr 15, 2007 04:38 PM
Question 9v motor 11v lipo will it work? Desert flier Batteries and Chargers 8 Feb 24, 2006 07:10 PM
Will I Fry My TP2100-3S? HavingFun2002 Batteries and Chargers 7 Apr 30, 2004 03:58 PM