Thread Tools
Oct 24, 2012, 09:39 PM
Registered User
Tim B.'s Avatar
Quote:
Originally Posted by pamela31 View Post
Thanks Tim, still got a lot of waves.
Thats OK !

So do the real ones !
Last edited by Tim B.; Jul 25, 2016 at 10:45 AM.
Sign up now
to remove ads between posts
Oct 28, 2012, 06:35 PM
P31
P31
Registered User
Hello everyone, just thought I would post some progress pic's. I have'nt been building much, just sanding and filling, and sanding and filling, wow I've got some real sore arms
Gary
Oct 28, 2012, 07:25 PM
Registered User
Tim B.'s Avatar

Wax on, wax off..


In the end, you will have powerfull arms.

Then I can send stuff to you for sanding ( )
Last edited by Tim B.; Jul 21, 2016 at 04:20 PM.
Oct 28, 2012, 11:41 PM
P31
P31
Registered User
Thought I would show the electronics that is going into the Corvet.
We have a Sabortooth RC ESC, it has forward, reverse, and turnning, means one motor slow's and the other speed's up, this with the rudder should make for some nice turns, It has a Bendini sound modual with 40 x 2 Amp twin speakers,the sound is twin Chev 454"s the sound is great. here is some pic's of the rough layout.
Oct 29, 2012, 06:49 AM
Chris Craft Corvette
42Corvette's Avatar
Your project is coming along really nicely. Another Sterling model saved. I built one as well and while reading your thread, I say that you are looking for fittings. The main scoops for the engine room are too rough to make look really nice.
I " borrowed" 2 table spoons from our kitchen drawer, flattened them a little and reshaped them to match the cast scoops. They are stainless steel and polish up perfectly like chrome. Since these are a major feature, I think this is a much better option.
These old cabin cruisers have so many beautiful curves. Have fun
Dickls
Oct 29, 2012, 07:12 AM
Chris Craft Corvette
42Corvette's Avatar
Here are the best pictures I could find showing the scoops made from tablespoons.
If you still want the Sterling cast scoops, I;ll be glad to give you mine. You'll save time using the spoons and get a vastly different outcome.
Dick
Oct 29, 2012, 03:47 PM
P31
P31
Registered User
Quote:
Originally Posted by 42Corvette View Post
Here are the best pictures I could find showing the scoops made from tablespoons.
If you still want the Sterling cast scoops, I;ll be glad to give you mine. You'll save time using the spoons and get a vastly different outcome.
Dick
Thanks Dick, your Corvet looks great, I hope mine will look this good. I had heard that someone had used spoon's and I think I am going to do the same, I have already stolen the one's I want and she has'nt missed them yet
Gary
Ps: Thanks for the offer on the scoops. Umi is making me a set of everything else.
Nov 05, 2012, 12:32 PM
P31
P31
Registered User
Well,, here's an update on where I am with the corvet, when working without a set of plans to refer to now and then some things turn out bad, so you take two steps forward and three back I had to do the roof over, and the transum, which had nothing to do with the plans, that was my bad. Tim B and Corvett42 have been helping alot. I plan on painting the hull, the final coat this week and hope it come's outgood, and then top planking.
Regards Gary
Nov 05, 2012, 02:31 PM
Registered User
Tim B.'s Avatar
Lookin GREAT, hope your weather is good for painting ...

Somehow we have about 80* and 27% humidity here !
Nov 05, 2012, 02:37 PM
P31
P31
Registered User
Ye, I remember, love those Santa Anna's, I have a heated shop, can't wait here to paint, we went 80 day's without rain, and now Moma nature is making that up, rain's every day off and on.
Nov 12, 2012, 07:36 PM
P31
P31
Registered User
Getting there, bow planking on and windshield started, Thanks to Corvett42, here's some pic's
Nov 12, 2012, 07:52 PM
Registered User
Tim B.'s Avatar
EXCELLENT !

I bet the original owner of this model would Never recognize it now ...

Lettuce know when you get the fittings from Gary !
Nov 12, 2012, 07:59 PM
P31
P31
Registered User
They are more than likley setting in the mail box but it's rainning and cold and to far to walk, maybe the little woman will check on her way back from town
Nov 25, 2014, 01:07 PM
Registered User
P_J_Glor's Avatar
Quote:
Originally Posted by P31 View Post
They are more than likley setting in the mail box but it's rainning and cold and to far to walk, maybe the little woman will check on her way back from town
Hope you made it to the mail box by now. Hard to believe two years have gone by since I was last reading this thread. Any progress since then?

Chris Craft lovers need to know . . .

Pete G
Dec 01, 2014, 05:23 PM
P31
P31
Registered User
Quote:
Originally Posted by P_J_Glor View Post
Hope you made it to the mail box by now. Hard to believe two years have gone by since I was last reading this thread. Any progress since then?

Chris Craft lovers need to know . . .

Pete G
Send me your Email and I'll send you some Pic's


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion CC Corvet P31 Scale Boats 0 Oct 06, 2012 11:17 PM
Sold JR R600 RX with TX crystal 42 and RX channel 42 mechengineer03 Aircraft - General - Radio Equipment (FS/W) 3 Dec 30, 2009 09:16 AM
For Sale JR R600 RX with TX crystal 42 and RX channel 42 mechengineer03 Aircraft - General - Radio Equipment (FS/W) 0 Sep 03, 2009 10:41 AM
Wanted Rimfire 42-60-600 42-60-800 arc1 Aircraft - Electric - Power Systems (FS/W) 1 Aug 21, 2008 04:33 PM
For Sale Fut DC RX xtals 42, 39, 48, 36, 42, 50, 46, need 14! krosypal Aircraft - General - Radio Equipment (FS/W) 0 Nov 10, 2007 03:32 PM