Thread Tools
Dec 03, 2012, 05:26 PM
EDF rules... :)
AirX's Avatar
Quote:
Originally Posted by D_FAST
I used 2 degrees it should have more like 3-4 as i seen the wing tips dip on me a few times on the lower speeds. Typical anhedral though.
Thanks for that.
On my designs I use a similar amount for mildly tapered wings and was wondering what you used.

Cheers,
Eric B.
Last edited by AirX; Dec 03, 2012 at 05:28 PM. Reason: Added content
Sign up now
to remove ads between posts
Dec 03, 2012, 05:55 PM
Registered User
unclecrash's Avatar
Good Job on the Maisen, sucks the J14 went in. You need to do like I do add a small 4cell NM 350ma for a reciever bat. That way if you loose your battery to the motor you still have a chance to land it. And its minimal on the weight gain. I use the little electrifly battery's. My RBC F35 starts waddling like a duck when its getting ready to stall lets you know you better be on the ground or adding power real soon. I lost one plane to a battery failure, and then I switched to the small battery for the reciever and pull the red wire to the bec
Dec 05, 2012, 07:12 AM
Registered User
D_FAST's Avatar
profile sheet
Last edited by D_FAST; Jan 21, 2013 at 02:43 PM.
Dec 05, 2012, 11:03 AM
Registered User
unclecrash's Avatar
sweet
Dec 05, 2012, 07:26 PM
Registered User
LuvEvolution7's Avatar
very cool to see it fly D. did you see that at the 27 second mark..................you almost hit that airliner. LOL.

by the way, the landing was fine as far as I'm concerned. the plane is still in one piece, so any landing that results in an airplane being in one piece is a good one.
Dec 05, 2012, 09:32 PM
Registered User
D_FAST's Avatar
working on them small details
Dec 05, 2012, 09:47 PM
Registered User
LuvEvolution7's Avatar
I like it, I love it, I want some more of it.
Dec 06, 2012, 01:48 AM
Registered User
By any chance would you have the SU-25 fuselage profiles?
Dec 06, 2012, 05:56 AM
Registered User
D_FAST's Avatar
sorry sabre, i haven't forgot your request, just a bit busy, and what time i have ive been working on the 39.
Just bare with me,ill get them to ya.
Dec 06, 2012, 04:08 PM
Registered User
No problem...take your time...thanks
Dec 06, 2012, 05:46 PM
Registered User
D_FAST's Avatar
Completed, the rest can be had in the su39 files
Last edited by D_FAST; Jan 21, 2013 at 02:45 PM.
Dec 07, 2012, 01:04 AM
Registered User
yep the SU-25
Dec 07, 2012, 01:52 PM
Registered User
unclecrash's Avatar
What are the difference's from the 39 to the 25
Dec 07, 2012, 02:08 PM
Registered User
D_FAST's Avatar
i thinks its avionics/electronics/counter measures/ power plant/larger tail surface on some models and a passenger.



Dec 07, 2012, 02:11 PM
Registered User
D_FAST's Avatar

Build #2


Reserved For Build #2
Last edited by D_FAST; Dec 07, 2012 at 02:27 PM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log EPP SU-39 (modernized SU-25 Frogfoot) formerly: lets play "guess the plane" Mr. UD Foamy EDFs 42 Sep 07, 2015 10:01 AM
Question Ducting for EPP SUKHOI SU-39 (~SU-25 Frogfoot) Mr. UD Scratchbuilt EDFs 8 Oct 15, 2011 12:26 PM
Question Su-25 Frogfoot.... got any plans? birdlives1955 Foamies (Scratchbuilt) 7 Feb 28, 2011 07:28 AM
su-25 frogfoot Robbie d Electric Ducted Fan Jet Talk 7 Dec 03, 2009 10:02 AM