****** Dynamic Foamy EF2000 for 30mm fan ******* - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Oct 07, 2012, 09:07 PM
DynamicFoamy's Avatar
New Product

****** Dynamic Foamy EF2000 for 30mm fan *******


Dynamic Foamy EF2000 coming soon! We hope to start shipping these late October just in time for the JR Indoor Festival. The plane uses the equipment from the GP F86 with the 30mm fan. We will also have a pusher configuration for these as well. We will have a pre-order page set up on our site sometime this week. I just slapped some basic rough decals on the prototype (as shown), there will be a few additional graphics not shown in these pictures.

Specs

Length: 20’’
Wingspan: 14.5’’
RTF weight: 1.8oz.
Est. Price $34.99

Thanks for looking,
Bert

EF2000 Micro Jet w/30mm FAN UNIT (2 min 4 sec)
Latest blog entry: Customer Support Forum
Sign up now
to remove ads between posts
Oct 07, 2012, 10:38 PM
Way to many airplanes!
Very nice, and great flying skill... Your airplanes are always sooooo awesome!
Oct 07, 2012, 11:16 PM
Registered User
Mike20's Avatar
I definitely want one. Post some more videos. I like how it flew and it seems pretty stable as well. Are you going to sell a BNF or ARF version as well? What's your website so I can pre order one?
Last edited by Mike20; Oct 07, 2012 at 11:22 PM.
Oct 08, 2012, 04:58 AM
Flying Dutchman!
robertboxhoorn's Avatar
Time to make THE canards working ;-)
Oct 08, 2012, 02:15 PM
What tree??.......Doh!!
Seahawk One's Avatar
Looks and flies great!

Looking forward!

Neil
Oct 08, 2012, 04:46 PM
Registered User
eaticus's Avatar
Looked great!

Subscribed!
Oct 08, 2012, 07:55 PM
Registered User
MUTCAKE's Avatar
Now your talking. You will see my order when these come out. I put my money where my mouth is.
Thanks
Oct 13, 2012, 07:13 AM
Fear me, I'm a space-duck.
hanzie's Avatar
Seems like it can handle quite some wind. Looks interesting!
Oct 21, 2012, 04:33 PM
DynamicFoamy's Avatar
Quote:
Originally Posted by robertboxhoorn
Time to make THE canards working ;-)
How’s this? This video is not very good as it was shot on my cell phone. I have been testing (flying, flying and flying) the canard system all weekend and its rock solid. It adds a lot of maneuverability to the model including better roll rate and inverted flight. The system added very little weight and the model is still less than 2oz. RTF.

I hope to get better flight and static video soon to replace these previous videos that have been posted.

Bert

EF2000 canard test (0 min 48 sec)
Latest blog entry: Customer Support Forum
Oct 21, 2012, 08:24 PM
Registered User
MUTCAKE's Avatar
CRAZY.
I take it that we're up to 4 servos now? can this been done with out an expensive computer radio, or can a v-tail mixer b added to do the same thing. Either way thats very interesting. I like the plane the way it is/was but this is cool too.
Very innovative. My dynex should be ordered soon from one of my adoring (adult kids) Now you have to get this on line since it's time for the wife to do her part spoiling me also. She know's how much I love micro edfs.
Keith
Oct 21, 2012, 09:06 PM
QuAd FaNaTiC
Razors edge 29's Avatar
this looks awesome
Oct 21, 2012, 09:46 PM
Registered User
MUTCAKE's Avatar
Bert,

Now this is customer service!

Someone asks you for an EDF 30mm jet and you make a jet, and give the first plans away free before ever offering it to the public. Then some one asks for another in the same series and you quickly pop one off the drawing board with video on the day that you said you would. Another member asks for functional canards and blammo. My hats off to you. My business is doing well because I try to offer the same kind of service. I don't always do as good a job as I should, but when I do i am always rewarded with more contracts etc. I hope these sell well for you cause you are doing everything right.
Thank you for great models and a good example to follow.
Keith
p.s. dont worry i won't keep plastering this thread with praise, cause that just gets old after while
Last edited by MUTCAKE; Oct 21, 2012 at 11:17 PM.
Oct 22, 2012, 01:00 AM
Lee Liddle
Knife Liddle's Avatar
looks like it could be done with 2 servos to me.
Oct 22, 2012, 09:59 AM
DynamicFoamy's Avatar
Quote:
Originally Posted by MUTCAKE
CRAZY.
I take it that we're up to 4 servos now? can this been done with out an expensive computer radio, or can a v-tail mixer b added to do the same thing. Either way thats very interesting. I like the plane the way it is/was but this is cool too.
Very innovative. My dynex should be ordered soon from one of my adoring (adult kids) Now you have to get this on line since it's time for the wife to do her part spoiling me also. She know's how much I love micro edfs.
Keith
It only uses two (2) servos and they are the ones out of the GP F86. As for the radio you will need one that has DELTA mix and most today do have that feature. Thanks so much for your kind words!!!!

Bert
Latest blog entry: Customer Support Forum
Oct 22, 2012, 03:00 PM
Kev Waite
Flying Horizons's Avatar
I have to get one of these with the working canards

Kevin


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Mini-Review Review of Dynamic Foamy "Dynamic 820 EPP" Razors edge 29 3D Foamies 22 Oct 15, 2014 08:34 PM
Discussion Biggest weight witha 30mm fan ? vengeance111 Micro EDF Jets and Power Systems 8 May 23, 2012 09:02 PM
Discussion 16" Plastic EF2000 just for fun Knife Liddle Pusher Prop Jet Models 2 Mar 22, 2012 06:39 PM
Discussion 10mm Motor for 30mm Fan boredom.is.me Foamy EDFs 4 Aug 06, 2008 02:44 PM
Discussion Initiative for 30mm fans with 12mm motor metroidrc Scratchbuilt Indoor and Micro Models 2 Dec 13, 2007 02:08 AM