Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Oct 03, 2012, 06:20 PM
flyandi is offline
Find More Posts by flyandi
Registered User
Yippee!

San Diego FPV/VP Meetups and Discussions


Welcome to the San Diego FPV / VP Meetup and Discussions Thread!

Based on our huge success at the 1st FPV Meetup San Diego North County, we decided to start a more regular group that can meetup in the San Diego County area and fly together FPV.

We announce here:

- Introductions to the Community
- Meetups on the weekends
- Anything else related to FPV and VP (Video Piloting) in San Diego

Current Members:

Kloner - Steve
Chris Avllino - Chris
Capt. Crunch - Wayne
tregtronics - Treggon
SDSURFnGLIDE - Kyle
typicalaimster - Scott
flyandi - Andy
1320fastback
jcmonty
Otto
Last edited by flyandi; Oct 03, 2012 at 10:02 PM.
Sign up now
to remove ads between posts
Old Oct 03, 2012, 06:32 PM
SDSURFnGLIDE is offline
Find More Posts by SDSURFnGLIDE
Multi rotors=No Paycheck left
SDSURFnGLIDE's Avatar
Hi!....im here.....
Old Oct 03, 2012, 07:13 PM
Capt. Crunch is offline
Find More Posts by Capt. Crunch
It's all fun till Crunch!
Capt. Crunch's Avatar
I'm in,

Capt. Crunch-Wayne
Old Oct 03, 2012, 07:25 PM
jcmonty is offline
Find More Posts by jcmonty
Registered User
Subscribed

I think that I can make the 10am sorrento meet up this Sat. Gotta check to make sure, but it should be fun. As I was saying, I have been practicing smooth AP/AV flying for the past few months on my Y6 multi. So, LOS for that guy only. I also have a small quad w/ Go pro that i can connect my downlink (900mhz) and fly FPV with my cheap 7in monitor. Not the best FPV setup but it works ok. Love to see what setups you guys are packing

- Jonathan
Old Oct 03, 2012, 07:27 PM
1320fastback is offline
Find More Posts by 1320fastback
Detroit 2-stroke junkie
1320fastback's Avatar
Sign me up.
Old Oct 03, 2012, 07:50 PM
typicalaimster is offline
Find More Posts by typicalaimster
Registered User
typicalaimster's Avatar
Quote:
Originally Posted by jcmonty View Post
I also have a small quad w/ Go pro that i can connect my downlink (900mhz) and fly FPV with my cheap 7in monitor.
If we meet up we'll have to coordinate with each other. I'm running 900mhz for my downlink and 2.4G for my uplink. I have a pre-ban video setup so we can look into options if we want to fly together.
Old Oct 03, 2012, 08:10 PM
typicalaimster is offline
Find More Posts by typicalaimster
Registered User
typicalaimster's Avatar
Just to toss it out there for the South County crowd. Here's a couple places to fly that I found I can share.

- SEFSD has lightened their FPV policy. Have to be a AMA member and have to fly within the field boundary. Plus you have to fly by the new AMA rules and under 400 feet. It may seem restrictive, but it's a pretty cool place to fly at IMHO. I usually fly here on the weekends. I still want to try flying through a gap in some of the trees out there! --Google Link--

- Lake Otay is a pretty nice place. There is a peninsula that ScrtSqrl and I discovered and flew there once already. There is a small private airport a mile to the east of the LZ. The lake is only open on Weekends and I think Wed. So keep that in mind before you travel! --Google Link--
Old Oct 03, 2012, 09:13 PM
Kloner is offline
Find More Posts by Kloner
Aerial DP
subscribed......

I'm sure that as we grow as a group we will all fall into our own channel assignments cause not many of us seemed like guys that liked to watch....... this will be sweet
Last edited by Kloner; Oct 04, 2012 at 10:09 AM.
Old Oct 03, 2012, 09:31 PM
Otto Dieffenbach is offline
Find More Posts by Otto Dieffenbach
subscribed...... Otto
Old Oct 03, 2012, 10:01 PM
flyandi is offline
Find More Posts by flyandi
Registered User
Otto are you German?
Old Oct 03, 2012, 10:04 PM
jcmonty is offline
Find More Posts by jcmonty
Registered User
Quote:
Originally Posted by typicalaimster View Post
If we meet up we'll have to coordinate with each other. I'm running 900mhz for my downlink and 2.4G for my uplink. I have a pre-ban video setup so we can look into options if we want to fly together.
Sounds good. My setup is 2.4ghz uplink (AHSS hitec), and the 900mhz 1w transmitter for the downlink. It's a HK setup, with a few channels (8 I think). Though I bet it doesn't play well with other 900mhz setups
Old Oct 03, 2012, 10:17 PM
mdv is online now
mdv
Find More Posts by mdv
mdv
Registered User
Please sign me up too. Not sure I'll make Saturday. Palomar RC Flyers has a big helicopter event going on.

Mark
Old Oct 03, 2012, 10:31 PM
tregtronics is offline
Find More Posts by tregtronics
Fly it, edit it, post it.
tregtronics's Avatar
Meeting Thursday, Saturday and Sunday at Sorrento, 10am for all I think.....

Where I setup my stuff:
LATLONG: 32.90641, -117.19635
https://maps.google.com/maps?hl=en&l...08256&t=h&z=18
Parking spot:
LATLONG: 32.90550, -117.19654

Subscribed.

I have 1.2, 1.3, and some 900 MHz Gear for VTZ/VRX.
I use 433 MHz 3dRobotics serial links, 433 MHz Dragonlink 1.0, soon to be 2.0, and a lot of Spektrum 2.4 GHz for control signals.

Treggon
Old Oct 03, 2012, 10:59 PM
scrtsqrl is offline
Find More Posts by scrtsqrl
Just trying to get a nut.
scrtsqrl's Avatar
Sweet. I'm in.
I fly mostly at SEFSD, in Mission Bay, at the beach, Otay Lake and the South Bay Park.
UHF RC/2.4 Vid.
I have a "trainer" EZ* and a full up DL/DOSD EZ*.
Last edited by scrtsqrl; Oct 04, 2012 at 12:16 AM.
Old Oct 03, 2012, 11:09 PM
Bill0 is online now
Find More Posts by Bill0
Registered User
Bill0's Avatar
Count me in.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Yippee! 1st FPV Meetup San Diego North County - September 29th 2012 at Dave's Beach, Carlsbad flyandi FPV Talk 364 Nov 13, 2012 10:05 AM
Link FPV Meetup in North County San Diego flyandi USA - District X 0 Aug 24, 2012 06:54 PM
Sold $60 LPU San Diego flyzone Focke wolf fw-190 reciver ready hepavirus Aircraft - Electric - Airplanes (FS/W) 5 Jun 20, 2012 08:59 PM
Discussion San Diego FPV Flyers? scrtsqrl FPV Talk 21 Mar 21, 2011 09:58 PM
Discussion AUV show in San Diego with FPV/RPV questtek FPV Talk 0 Jun 11, 2008 11:25 AM