Thread Tools
This thread is privately moderated by wdelarme, who may elect to delete unwanted replies.
Oct 02, 2012, 07:36 AM
Trader Rating: 35
Registered User
For Sale

DJI NAZA GPS Protector


Protect your DJI NAZ GPS. I have personally lost one GPS to a roll over crash. This device is designed to break off in hard crashes that hit the gps gaurd. It has one stainless steel bolt that hold the pieces together. You can mount it with one stainless steel bolt from underneath.

The device also is designed to manually rotate to allow for magnetic declination adjustments

In the case of a rollover crash the device hits on the guarded area around the GPS compass and if the crash is hard enough the guard snaps off of the stand for protection. The bottom of the guard is 5mm thick abs plastic the sides are solid ABS plastic. I can make these in black or white

2 inches tall from top to bottom

$10 shipped in USA ( I am shipping over seas but the shipping has to be paid by the purchaser
$5 shipped for replacement parts in the USA (ie the guard has been snapped off from crashing)

Because I make them with my 3D printer I can also make them different lengths if needed

Name: 2012-09-19 22.25.40.jpg
Views: 161
Size: 248.0 KB
Description:

Name: 2012-09-19 23.08.02.jpg
Views: 154
Size: 232.9 KB
Description:

Some are actually getting very good results with shielding the inside with copper

Paypal wdelarme@gmail.com

Patent Pending
Sign up now
to remove ads between posts
Oct 02, 2012, 09:12 AM
Trader Rating: 50
Registered User
I just put mine on and it fits great. It is so easy to adjust, I dialed my GPS in perfectly in a minute. No problem with locking on to the sats, 2" height works fine.
Oct 02, 2012, 09:39 AM
Trader Rating: 63
Registered User
aerorynamic's Avatar
should be getting mine in the mail next couple day, cant wait thanks again for this clever product
Oct 02, 2012, 09:59 AM
Trader Rating: 35
Registered User
Did you have any issues with the bolts I used?

I'm thinking about using 3mm bolts instead of the 4-40 3/32 head bolts
Oct 02, 2012, 02:58 PM
Trader Rating: 50
Registered User
The bolts are quite tight. That is probably a good thing, but the bottom one can be tough to deal with. Not sure if 3mm will improve that, but i seem to use 3mm a lot and only 4-40 for Rusty's frame bolts. 3 mm may be more common in this area and everyone has mm tools.
Oct 03, 2012, 09:56 AM
Trader Rating: 5
Registered User
Quote:
Originally Posted by azred
The bolts are quite tight. That is probably a good thing, but the bottom one can be tough to deal with. Not sure if 3mm will improve that, but i seem to use 3mm a lot and only 4-40 for Rusty's frame bolts. 3 mm may be more common in this area and everyone has mm tools.
+1, as I already mentioned, the bolt gave me a hard time. Other than that, it's a great product which solved my TBE problem once and for all and gives me some piece of mind. Signal is still perfect with 2 in pole.

Buy with confidence guys!
Oct 03, 2012, 02:57 PM
Trader Rating: 35
Registered User
Quote:
Originally Posted by jamac
+1, as I already mentioned, the bolt gave me a hard time. Other than that, it's a great product which solved my TBE problem once and for all and gives me some piece of mind. Signal is still perfect with 2 in pole.

Buy with confidence guys!
Just keep in mind the allen head is 3/32 and the screw is a 4-40 stainless
Oct 10, 2012, 01:01 PM
Trader Rating: 0
Registered User

DJI NAZA GPS protector


Quote:
Originally Posted by wdelarme
Protect your DJI NAZ GPS. I have personally lost one GPS to a roll over crash. This device is designed to break off in hard crashes that hit the gps gaurd. It has one stainless steel bolt that hold the pieces together. You can mount it with one stainless steel bolt from underneath.

The device also is designed to manually rotate to allow for magnetic declination adjustments

In the case of a rollover crash the device hits on the guarded area around the GPS compass and if the crash is hard enough the guard snaps off of the stand for protection. The bottom of the guard is 5mm thick abs plastic the sides are solid ABS plastic. I can make these in black or white

2 inches tall from top to bottom

$10 shipped in USA ( I am shipping over seas but the shipping has to be paid by the purchaser
$5 shipped for replacement parts in the USA (ie the guard has been snapped off from crashing)

Because I make them with my 3D printer I can also make them different lengths if needed

Attachment 5201383

Attachment 5201384

Some are actually getting very good results with shielding the inside with copper

Paypal wdelarme@gmail.com

Patent Pending
Hi,
I would like to order this item. Could you confirm that you can ship overseas (French Polynesia). I can use paypal for payment.
Thank you
Oct 10, 2012, 01:17 PM
Trader Rating: 35
Registered User
I will for $8.00 shipping + $10.00 each . Please include in paypal payment any specifics how many you want etc

Quote:
Originally Posted by yaktork
Hi,
I would like to order this item. Could you confirm that you can ship overseas (French Polynesia). I can use paypal for payment.
Thank you
Jan 20, 2014, 09:34 AM
Trader Rating: 63
Registered User
stwaller12's Avatar
Do you still have any of these left? I would like one.
Jan 20, 2014, 01:09 PM
Trader Rating: 35
Registered User
Quote:
Originally Posted by stwaller12
Do you still have any of these left? I would like one.
Yes i still make them.
Jan 24, 2014, 06:37 PM
Trader Rating: 63
Registered User
stwaller12's Avatar
I need a replacement top cup. Do you make them without the stand? If so how much would that be?
Jan 24, 2014, 06:56 PM
Trader Rating: 35
Registered User
Quote:
Originally Posted by stwaller12
I need a replacement top cup. Do you make them without the stand? If so how much would that be?
5 bucks shipped in the usa
Jan 25, 2014, 06:20 PM
Trader Rating: 63
Registered User
stwaller12's Avatar
Just sent you a paypal payment for the upper guard.

Quote:
Originally Posted by wdelarme
5 bucks shipped in the usa
Jan 27, 2015, 01:17 AM
Trader Rating: 0
Registered User

Black GPS protector for NAZA M Lite w/ copper shielding


I just sent $15.00 by PayPal. Just got the PayPal shipping notification.

Thanks!
Last edited by Dr Awkward; Jan 28, 2015 at 10:28 PM. Reason: typo, added note

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion DJI Naza vs DJI WK-M - What do you get for the extra $860?? brianshell Multirotor Drone Talk 96 Jul 19, 2013 08:15 AM
For Sale DJI NAZA GPS Protector wdelarme Aircraft - Electric - Multirotor (FS/W) 3 Sep 25, 2012 03:58 AM
Found DJI NAZA GPS Upgrade Module for the DJI Naza Flight Controller skyhulk Aircraft - Electric - Multirotor (FS/W) 10 Jul 20, 2012 08:47 PM
Discussion DJI F450 NAZA kit vs Witespy VC450 with NAZA kit MC21 Multirotor Drone Talk 5 May 16, 2012 02:16 PM