Today's mod,coax mod.

KKDDMM · 05:41 AM

I did a mod to coax-heli today.
After this mod,my 9998 can fly tilted-turn.
I recommend this mod.
Let's reproduction this mod.

see next page,other photos.

KKDDMM · , 05:40 AM

see other photos.

RoboHeli · , 08:45 AM

Very interesting!!!

What linkages from which helicopter did you use for this?

Also, regarding the metal shaft with the link ball, which helicopter did that come from?

I'd like to see about compiling a parts list. This would be quite interesting to try out!

KKDDMM · , 09:11 AM

Quote:

Originally Posted by RoboHeli

Very interesting!!!

What linkages from which helicopter did you use for this?

Also, regarding the metal shaft with the link ball, which helicopter did that come from?

I'd like to see about compiling a parts list. This would be quite interesting to try out!

ALL parts is from WALKERA.

RoboHeli · , 09:25 AM

Thanks!!!!

KKDDMM · , 06:23 AM

She became better than before.
Right tilted turn is better than Left,I don't know the reason.

djdavies83 · , 09:21 AM

I've got a custom project in my head that will need parts like these, KKDDMM, do you know where I can get some 45' bevelled gears that would fit to the 9958 main shaft? I Imagine from a Walkera.

KKDDMM · , 10:39 AM

Quote:

Originally Posted by djdavies83

I've got a custom project in my head that will need parts like these, KKDDMM, do you know where I can get some 45' bevelled gears that would fit to the 9958 main shaft? I Imagine from a Walkera.

Just like this?
The hole of this part is 2.5mm.
The main shaft of 9958 is 3mm.
You need adjust little.

djdavies83 · , 02:06 PM

I could cut away the main gear as I only need to send power of at 45' do you have a part number for the smaller gear that would work with it?

Oh and thank you, it should fit nice once I have opened the hole a little with a 3mm bit.

KKDDMM · , 05:36 PM

Quote:

Originally Posted by djdavies83

I could cut away the main gear as I only need to send power of at 45' do you have a part number for the smaller gear that would work with it?

Oh and thank you, it should fit nice once I have opened the hole a little with a 3mm bit.

smallest one of these.

djdavies83 · , 06:59 PM

they look cool, not a bad price http://www.helipal.com/hm-v120d02-z-...1ihlbqfffvshf3

but I would have to buy two sets as I need a matching pair on each end of the rod, maybe two of that bigger spur gear, know any good deals different brands?

thanks for your help on this by the way.

Oct 02, 2012, 05:35 AM #1
KKDDMM
KKDDMM I love MOD! & WALKERA & V911! Thread OP	Gallery Today's mod,coax mod. I did a mod to coax-heli today. After this mod,my 9998 can fly tilted-turn. I recommend this mod. Let's reproduction this mod. see next page,other photos. Images View all Images in thread Views: 314 normal head of 9998. Views: 270 Today's mod,using parts of CB100. Views: 257 I modded the ratio of tilt. Views: 244 Views: 225 Use V911's bar,put it upside-down. Views: 264 same logic.
	Last edited by KKDDMM; Oct 02, 2012 at 05:41 AM.

Oct 02, 2012, 05:40 AM #2
KKDDMM
KKDDMM I love MOD! & WALKERA & V911! Thread OP	add photos see other photos. Images View all Images in thread Views: 87 Views: 81 Views: 92 Views: 78 Views: 76

Oct 03, 2012, 06:23 AM #6
KKDDMM
KKDDMM I love MOD! & WALKERA & V911! Thread OP	I changed the ratio of bell lever. She became better than before. Right tilted turn is better than Left,I don't know the reason. Images View all Images in thread Views: 71 I changed the ratio of bell lever. Views: 74 Views: 64 She can fly tilted (right) turn.

Quick Reply
The following errors occurred with your submission

Okay
Message: Posting Quick Reply - Please Wait

Similar Threads
Category	Thread	Thread Starter	Forum	Replies	Last Post
Discussion	dragnse7en's Litehawk II micro coax helicopter review	dragnse7en	Coaxial Helicopters	8	May 02, 2012 09:28 AM
Discussion	Small metal coax heli for $19.99, today only. Link inside...	Heli_Noob	Coaxial Helicopters	6	Aug 20, 2011 09:22 AM
For Sale	FS: Lightly Modded Eflite Blade CX Coax Heli RTF	Jdeiter	Aircraft - Electric - Helis (FS/W)	2	Dec 30, 2009 03:59 PM
Discussion	COAX Scale bodies and mods	gbruce	Scale Helicopters	6	Dec 20, 2007 06:09 AM

Today's mod,coax mod.

Images

add photos

Images

Images

I changed the ratio of bell lever.

Images

Images

Images

Channels

About RCG

Features

Tools

Media

Topics

Oct 02, 2012, 08:45 AM #3
RoboHeli
RoboHeli Safety : practice & promote!	Very interesting!!! What linkages from which helicopter did you use for this? Also, regarding the metal shaft with the link ball, which helicopter did that come from? I'd like to see about compiling a parts list. This would be quite interesting to try out!

Oct 02, 2012, 09:25 AM #5
RoboHeli
RoboHeli Safety : practice & promote!	Thanks!!!!

Oct 03, 2012, 09:21 AM #7
djdavies83
djdavies83 We can rebuild it!	I've got a custom project in my head that will need parts like these, KKDDMM, do you know where I can get some 45' bevelled gears that would fit to the 9958 main shaft? I Imagine from a Walkera.

Oct 03, 2012, 02:06 PM #9
djdavies83
djdavies83 We can rebuild it!	I could cut away the main gear as I only need to send power of at 45' do you have a part number for the smaller gear that would work with it? Oh and thank you, it should fit nice once I have opened the hole a little with a 3mm bit.

Oct 03, 2012, 06:59 PM #11
djdavies83
djdavies83 We can rebuild it!	they look cool, not a bad price http://www.helipal.com/hm-v120d02-z-...1ihlbqfffvshf3 but I would have to buy two sets as I need a matching pair on each end of the rod, maybe two of that bigger spur gear, know any good deals different brands? thanks for your help on this by the way.

RCGroups Message

Cancel Changes