robbe geier "nurflugel" questions
I was given the wing part of this glider and am now designing a "fusselage box" that i mount under it (kinda like the original i asume)
i have a few gestions
cg; where measured form the center of the wind leading edge?
deflections ; how mutch up dows for airlon and elevator function?
trust line ; if i use a reference line form both the center of the leading and trailing edge, what angle should the "firewall" be?
i found the folowing parts that i intend of using
servo's; fut 3001 (2)
batery; 8 sanyo 2000 mah (gray silver with orange numbers)
esc; shulze slim 25
motor; robbe planeta gear speed 400 part # 4185
prop; aeronaut 8*5 white folding
Yes! I built a Geier E when I lived in Kerkrade.
Mine had 8 subCs and a Graupner Jumbo 550 which I tried both DD and geared, I settled for a 7x6 on DD in the end. I don't know why I still have the motor mounting bracket.
The geared 400 is not enough for this model (particularly with subCs). Unfortunately the plan was passed on with the model, but if I was to do it all again, it would probably get a Speed 600 Race 8.4v with something like a 7x5 pusher.
Goes really well off a short bungee.
Happy flying, John
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Robbe Bucker "Jungmeister"||simano||Parkflyers||103||Mar 07, 2009 12:22 PM|
|Robbe Bucker "Jungmeister"||simano||Scale Kit/Scratch Built||0||Oct 20, 2002 01:32 PM|
|Hanger 9 "Pizazz" questions||KOMET 44||Sport Planes||5||Aug 15, 2002 07:28 PM|
|Sokol - Electric Pylon "101" Questions||BOBWRC||High Performance||10||May 06, 2002 02:48 PM|
|Robbe Ranger "info needed"||rck||Foamies (Kits)||2||Oct 17, 2001 03:19 AM|