Blade Nano CPX first hovering
Last night, I maidened my new Blade Nano CPX.
As the pitch was around -18/-4/+10, I adjusted the pitch approx. -14/0/+14 by lengthening the three push rods 2 turns.
I programmed my JR 11X ZERO according to the settings for DX8 in the manual.
I hovered five packs in my living room.
At first, the heli was a bit too twitchy for me.
I adjusted the TC/PC gentle and reduced D/R to 70% for the aileron and the elevator.
Athough the heli is less twitchy now, it is still harder to hover than mCPX or 130X. The behavior is quite similar to Walkera MiniCP, IMHO.
-small enough for living room hovering.
-quieter than mCPX or MiniCP.
-not so fragile. any minor crashes are OK.
-easy to FFF with the stock bullet main rotor blades.
-The stock pitch setting may be incorrect.
-a bit twitchy.
-the tail authority is not so good.
-the stock main motor will last not so long. Mine died on the 24th flight.
My current Blade fleet: Nano CPX(2), 130X(2), mQX, 300X and 450X.
#I sold mCPX, mCPX2 and 450 3D.
(last modified: Nov. 18, 2012)
Last edited by cvlex; Jan 13, 2013 at 10:25 PM.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|New Product||Blade nano CPX - even smaller than the mCPX!||zadaw||Micro Helis||13568||Feb 10, 2017 09:28 PM|
|Sold||Blade Nano CPX BNF||Gary Hoorn||Aircraft - Electric - Helis (FS/W)||2||Sep 27, 2012 03:57 PM|
|Sold||Blade Nano CPX BNF||lawguy14||Aircraft - Electric - Helis (FS/W)||8||Sep 27, 2012 11:34 AM|
|Sold||Blade Nano CPX BNF||Pilot in MO||Aircraft - Electric - Helis (FS/W)||2||Sep 24, 2012 12:50 PM|
|Sold||New blade NANO cpx !!!!!!!!!!!!!!!||RRT||Aircraft - Electric - Helis (FS/W)||0||Sep 23, 2012 01:45 PM|