Hi All,

This is the Flyduino Nanoquad PCB frame for the Nanowii.
The connectors align between the FC and frame, the two are simply connected with pins.
The design and finish are first class.
RC groups NanoWii Thread.








Recommended...
Flydruino 6A ESC
T-Motor MT1306 3100KV
500mAh - 800mAh 2S Lipo
2 & 3 blade 5030 props are on their site too. (All prices include 19%VAT until logged in)


Updates...

Builds

Link to Warthox's build. Plus more here and here.
ESC's reversed for cooling (wires reversed!) and Landing gear omitted. Sweet!!!

Warthox's flying vids...

(2 min 18 sec)

(2 min 23 sec)

(2 min 1 sec)

With a GoPro2 onboard... Pictures...

(2 min 15 sec)

Felix (designer) with his UltraESCs

nanoquad + UltraESC = fun (5 min 22 sec)

Sarrs4's build in progress.

AndyBra's build here and here.
Turnigy Park 250 2200kV and 10A Plush ESC's
Flying vid here from Hogster.


Mine has arrived, here are some pix of the components. Check em out full size.

Which RX will you use?

Originally Posted by mystman

Which RX will you use?

Hey mystman,

edit...

I have just read the NanoWii Manual and in 2.3.3 it seems the only receiver necessary is a Spectrum satellite RX. I wondered what the connector on the back left arm was for.

It seems from here either the SPM9645 or the SPM9545 will work? In both 11ms and 22ms.

This is good as I have a 9545. I was thinking I'd need to use a normal Rx. The possibilities these days astound me

Cheers.

It looks good. I like the fact that it is meant to use multiwii.

Originally Posted by Soma

I have just read the NanoWii Manual and in 2.3.3 it seems the only receiver necessary is a Spectrum satellite RX. I wondered what the connector on the back left arm was for.

I would like to know, if the OrangeRx R100 Satellite Receiver ($11.99) would also work : https://www.hobbyking.com/hobbyking/s..._Receiver.html
It's 1/3 of the Spektrums price.

Not sure. If it is compatible with original spektrum recievers, it should work.

heres my build.

mt1306
flyduino 6A esc
2s480
5x3" prop flyduino

Originally Posted by warthox

heres my build.

mt1306
flyduino 6A esc
2s480

Can I use 3S 1000 mAh lipo with these 1306 Tiger motors?Im using Turnigy Plush 12A ESCs. 2 bladed props 5030.
I have ordered one of these nano frame from the Flyduino shop and the Tiger motor set as well.
They have not arrived yet.
Any advice would be much appreciated.
I have used Turnigy 1811 -2000Kv motors with 3S 1000 mAh without any issues.

Thanks,
AeroR

Originally Posted by AeroR

Can I use 3S 1000 mAh lipo with these 1306 Tiger motors?Im using Turnigy Plush 12A ESCs. 2 bladed props 5030.
I have ordered one of these nano frame from the Flyduino shop and the Tiger motor set as well.
They have not arrived yet.
Any advice would be much appreciated.
I have used Turnigy 1811 -2000Kv motors with 3S 1000 mAh without any issues.

Thanks,
AeroR

i think the mt1306 wouldnt survive 3s. the motor is for 1-2s. also the weight is very high with 3s1000 so i think it wouldnt even fly well.

I like these new frames better than the original ones. Especially the light placement.

Are these frames offered in the US or just direct from overseas?

Bad ass! I want one

Looks amazing !Have you got any video footage warthox of it in action ?

Originally Posted by Jim Frahm

Are these frames offered in the US or just direct from overseas?

afaik they are only sold from germany...

Originally Posted by Kris...

Looks amazing !Have you got any video footage warthox of it in action ?

i made a video on saturday but at home i wasnt able to get the data from sd card. it seems that my card is damaged. it was in the washing machine some days before
will make a new one at weekend.
its the best flying miniquad i flew so far. i like it

Looking forward to it I am always finding 2S lipos in my washing machine :P