Ares NANO-MICRO Tiger Moth 75 - Page 5 - RC Groups
Thread Tools
Dec 29, 2012, 10:25 PM
Registered User
Interesting, the one I've seen close up had significant right and down thrust and seemed to be pretty well aligned also. Its owner said it did have a big torque roll to the left though and that one of the magnets for a strut wasn't glued in on opening. Haven't seen it fly yet. One suspects the quality control may not be all that high, though the sample size is pretty small yet.....
Sign up now
to remove ads between posts
Dec 30, 2012, 12:25 PM
Registered User

Area Tm 75

Yes, I always wonder how and what the manufacturing places look like. One day you might have a person or machine gluing in a firewall at a slight left angle, and the next day someone else doing a bunch with the firewalls glued in perpendicular to the fuse' or at a right angle. The firewall's glue could be scraped off with an exacto knife, maybe w/o ruining the foam fuse', but probably not worth it. If it flies good, only the operated knows it's flying out of wack with excessive trim. As I fly it around slow, it keeps looking like a Curtiss Jenny from a distance. Right turns are really neat with the torque of the prop. It just hangs there slightly nose high with it kind of turning right side fuselage leading the way. Adverse yaw.
Dec 30, 2012, 06:29 PM
RTF only for now!!!
Greg_Vincent's Avatar
Can anyone comment on whether the Tiger Moth can fly as slowly as the Nano Micro Stick 75?
Dec 30, 2012, 08:00 PM
Registered User
I have a Parkzone Vapor. The Ares Tiger Moth can pretty much fly as slow as the Vapor in cruise flight. I found it's not so much the size of the flying area for the little TM, but the landing area. It takes some getting used to the rudder control with the magnetic actuator. I work in a giant building, lots of air, but landing is limited to long tables or limited floor space, (parachute manufacturing company.
Jan 06, 2013, 09:31 AM
Registered User
I was wondering what was the cause for the brief recall. I bought my Tiger Moth at the end of November. It was the first my local Hobby Town sold. It has performed well for a couple dozen flights, but yesterday it started shutting down after just a few minutes and now it's totally dead. Anyone know if this was what the recall was about?
Jan 06, 2013, 02:08 PM
Registered User
Originally Posted by Steve Percifield
I was wondering what was the cause for the brief recall. I bought my Tiger Moth at the end of November. It was the first my local Hobby Town sold. It has performed well for a couple dozen flights, but yesterday it started shutting down after just a few minutes and now it's totally dead. Anyone know if this was what the recall was about?
See post 55 on page 4.
Jan 12, 2013, 08:27 AM
Registered User

Not quite there yet.......

Well, I have had to return my second T.M. and will stay away from this product until next years indoor flying events......

My first one had the cabanes glued in farther on one side than the other. It looked like crap, but actually flew OK. But after about 6 flights the motor just died in it....with NO crashes....Took it back to Hobbytown to get a replacement. We had to go through three boxes before we found one when the upper wing was actually glued on straight. Took it home and flew it outside after dark. About one and a half minutes into the first flight, the elevator servo lock up in the down position.....Took it back to Hobbytown where a associate took it apart and looked at it.....but could not fix it. I told them that I would like a refund.

Hobbytown does have a thirty day warranty on the product which is nice to have. But with so many little issues, I was afraid that the product would have issues after a couple of months and I would be left on the hook for repairs.

I really wanted this plane for our indoor flying season of our club.....but they obviously don't have the quality right yet in this little bird. Like a good bourbon.....I'm gonna let this one 'age' a little bit longer, and hopefully, they will have all the kinks worked out in several months..........
Jan 16, 2013, 06:49 PM
Registered User
Turns out the doubled rare earth magnets are not a particularly good idea. on a not-that-hard crash I had 3 of them pull loose from the glue: two on the landing gear and one on a wing strut. plus one wing strut came with one magnet not glued down. A better idea would be to use ONE rare earth magnet and a little disc of steel, rather than the two. should still be strong enough to do the job without being stronger than the glue. then you wouldn't have to worry about the polarity on the TINY little things if you ever had to glue them back, either.....
Feb 09, 2013, 11:19 PM
Registered User
bluesman77's Avatar

Parts Availability

I called the Pittsburg Hobby Town today to determine the availability of the ATM since the recall & was told there is now a significant inventory & there should be no problem getting one. The young man went on to say if the warehouse didn't have sufficient inventory - he'd give me a call & refund my money if I so wished.

I asked about what spare parts should be ordered & was told the prop/spinner, prop shaft/gear & maybe wings & struts. I've since gone to the Hobby Town web site getting prepared to place an order, but was only able to find a few spare parts. I spent quite a while trying to figure out how to get pricing &, more importantly, ways to order parts - but wasn't able to do so. Am I missing something or is Hobby Town not inventorying many parts for this plane?
Feb 10, 2013, 02:33 AM
Registered User
It's probably hard to tell if they're not stocking a lot of parts or it's just their incredibly bad web design. Hobbytown probably has the worst website of any hobby company with a national footprint.

can't say a lot of good things about my Tiger Moth....Finally got it to fly circuits in the 30x30x12 room where I fly the mini-vapor and original vapor. This was after adding foam spoilers to slow it down, a lot, and adding area to the rudder to help correct for the severe left torque. Nerve-wracking flying compared to both the vapors! AND I still can't make a right hand turn without spiralling in, even when trimmed well for straight flight. it's VERY elevator and throttle sensitive. still, this is progress, of a sort. . also knocked the motor mount loose on a crash/landing as it's not glued in very well. was able to open the rhs cowl (pilot view) and sorta maybe get it glued back in and of course that completely changed the's gorgeous in the air, but fragile and with low build quality (transmitter is awful, also, MUCH worse than the rtf with the vapors). I suspect these are some of the reasons this thread is so short and there's only one or two videos of it flying, none on rcgroups. caveat emptor. lots of good ideas, poorly implemented... Oh, the stock 50 mah batteries are GREAT in the mini-vapor and consistently give me flights of 10 minutes.
Feb 10, 2013, 10:59 AM
Registered User
I R Irv's Avatar


I put the Mini Vapor electrics in there Nano Micro Stick and it flies great, maybe someone should try this with the Tiger Moth. It just might turn it into your favorite plane.
Feb 10, 2013, 06:39 PM
Registered User
I'd rather Hobbyzone just put one out with the Vapor guts! . Carbon fiber with film covered wings, etc. etc......They'd probably outsell the mini Vapor even.
Feb 10, 2013, 07:37 PM
Registered User
Yet another thing wrong with this plane, the battery connector motor wires are about half the gauge as on any other micro! not hard to figure out how I know that. Anyone want one of these at 60% retail?
Feb 10, 2013, 09:19 PM
Elfi Flyer
Doug Sipprell's Avatar
Well, I have mixed emotions over the entire Nano TM issue. I'm distressed to hear other's have had problems with this micro flyer, but glad I asked before buying. I'll definitely hold off on this little Moth. Our club has another indoor event this coming Tues. PM, so my Ember 2 #1, Champ, MiniVapor, and FZ Albatros will get some exercise.

Mar 02, 2013, 05:43 PM
Registered User
bluesman77's Avatar

Battery Weight

Can anyone tell me how much the ATM battery weighs? I'm thinking about trying one in my Ares Nano Micro Stick 75 & wanted to know how much heavier it is than the AMS 30 mAh battery.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! Missing instructions for Micro Tiger Moth Chief101 Parkflyers 0 Jul 04, 2012 03:08 PM
Discussion new micro tiger moth cale10 Micro Ready-to-Fly 2 Jun 21, 2012 12:01 AM
For Sale Ares Nano-Micro Stick RTF Propnutz Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 1 May 31, 2012 10:12 PM
Sold Ares nano micro stick 75 RTF $45 3d astronaut Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 1 Mar 08, 2012 07:47 PM
Micro Moth - RFFS100 Tiger Moth Chris3D Scratchbuilt Indoor and Micro Models 56 Dec 13, 2002 07:57 AM