Mirage 2000 - 120mm and 90mm EDF - Parkjetdesign - Page 5 - RC Groups
Thread Tools
Nov 08, 2012, 08:07 PM
Registered User
Yea. Im just trying to look at succesful setups to see where i can improve
Sign up now
to remove ads between posts
Nov 08, 2012, 08:17 PM
Registered User
Yea. Im just trying to look at Successful setups to see where i can improve
Nov 09, 2012, 02:05 AM
Originally Posted by humbertomelo
Painting more layers then the first varnish layer
Hi Humbertus, great finish, I was always saying you can finish depron to anything you like with bit of loving care and patiency and still keep it feather light. How close did you get to 250km/h? did you check it? With my FlyFly I did 250 on down wind leg, mind you in 20+knot wind. Yesterday flew it again in very windy conditions, after touching down I got rude shock when she hopped up again to some 5meters! You have to watch these Deltas in wind! Today was absolute magic, not a breze, Regards J.
Nov 09, 2012, 08:42 AM
Registered User
I have able to get a few jets to actually go backwards in a strong wind
Nov 10, 2012, 09:32 PM
Registered User
Jofro, i didn't test the top speed...but it's very impressive flight, my heart beats at 160 bpm during the flight :-)

One more video, from today test.
Mirage 2000 - EDF 90mm (3 min 10 sec)
Last edited by humbertomelo; Nov 11, 2012 at 06:38 PM.
Nov 11, 2012, 11:12 PM
Registered User
do you have title plan ?
Nov 12, 2012, 11:36 AM
Registered User
Do you mean : tiled plans, for a4 printing ?
Nov 12, 2012, 05:13 PM
Registered User
i already done in a4 if you giving me permission i can attached here. just having issue to put attached image on exact location, os i f you draw line or some thing will be easy,,
Nov 12, 2012, 07:26 PM
Registered User
Mar 25, 2013, 12:41 AM
Registered User
just one question what you mean by epoxi resin

does it mean i can use this


and put fiber galss on it ?

Originally Posted by humbertomelo
Yes i did, epoxi resin + fiber cloth
Mar 25, 2013, 07:37 AM
Registered User
Yes and no... Yes because it is very similar to that one, and no because you must find a long time cure resin... If not you dont have time to adjust the fiber or even apply the resin in an extended area. Find one 24hs time cure.


Last edited by humbertomelo; Mar 31, 2013 at 09:05 PM.
Mar 25, 2013, 06:06 PM
Registered User
thank you
Mar 26, 2013, 01:32 AM
Registered User
Originally Posted by humbertomelo
Do you mean : tiled plans, for a4 printing ?

With adobe reader X having this poster printing ability nowadays. It's no longer necessary to make tiled plans anymore.

Nowadays I just use the full sized plan and poster print them. Less chance of mistakes from the owner making mistakes while tiling them.

Saves me more paper even.
Mar 31, 2013, 01:12 AM
Registered User
builderdude's Avatar
Another fantastic Jet, Humberto. I enjoyed your last video.
But the guy running the engine in the background was a little annoying. Still, I got to hear your jet on the flybys and it really does sound like a jet, in a way. I don't think the gas turbine engines necessarily have a speed advantage over the EDF jets, if they're built right.
Apr 02, 2013, 08:15 PM
Registered User
i m just trying to build it, hopefully 2nd model will be more clean ...

I am not sure about the power system I am using and I am 80% I am not having a correct power system

41000 kv edf
with 4cell 1300mah.
60A Esc.

any thought ???

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log Megajets Mirage 2000 Build Guide superscott Foamies (Kits) 12 Jun 01, 2012 06:38 PM
Discussion mid air crash mirage 2000 40 pound turbine!! sherlockshah Jet Turbines 6 May 09, 2012 09:50 AM
For Sale NIB PNP Skyangel JAS39 Mirage 2000 FW190 T28 FMS 1400 & 800 warbirds www.hobbyb.com Aircraft - Electric - Airplanes (FS/W) 1 Apr 29, 2012 08:30 PM
Discussion amazing footage 40 pound turbine mirage 2000 Midair crash!!! sherlockshah Crash Discussion 21 Mar 29, 2012 11:10 AM