i have no problem without the iosd too.

Hello
could you post a picture of the setup..
I am using z15 and OSD without problem ...

Originally Posted by sdaudet

Hello
could you post a picture of the setup..
I am using z15 and OSD without problem ...

what do you use as video TX ?

i have dji TX ... i have immersion rc but not try

with dji TX sure it works. maybe immersion doesn't really works in 6s.
when i use only with z15 it is on 12v ( z15 power out ) with IOSD it is 25,2v power out for TX

flytahiti, it does work on 6S. Mine was connected directly to the main power distribution board on the S800.

Originally Posted by flytahiti

i received mine from fpv4ever and it doesn't work !!! i have tried all the day on my s800 + z15 but nothing black screen . i don't know if i have miss something.

HI


It s problem known by DJI . PLs send us back by letter .
We will send you a new model asap .


Bonjour,

Désolé pour la gene occasioné . Dji nous renvoi des OSD ne présentant pas ce défaut . Sur certaine camera cela ne passe pas .
Nous ne manquerons pas de vous en faire parvenir un , dans les plus brefs délai .


cdlt
Fabien
Fpv4ever

ok thank you i will send it back .

la camera utilisée est le sony nex 5n avec zenmuse aucun problèmes.
mais avec lIOSD le retour vidéo se coupe au démarrage des moteurs .

Originally Posted by flytahiti

la camera utilisée est le sony nex 5n avec zenmuse aucun problèmes.
mais avec lIOSD le retour vidéo se coupe au démarrage des moteurs .

tu as un des premiers osd qui est donc defectueux. Tu l'as commandé ou ?

Mine is not working too. Only display osd overlays on a black background. No video from the camera (canon 550d). Bought it from Flash RC in France. Got it yesterday.

If i put cable direct to video Tx, no problem, got the video.

DJI said to ressellers : our firsts OSD are KO with black screen with some cams...

I feel good DJI explain himself on the subject here (!!!)

Does all the firsts DJI products are boggued ? (S800 ESC, S800 prop, WK-M resistances, FW 5.1xx)
They give OSD to first S800 owners because ESC KO
What will they give now with this KO OSD ???

Originally Posted by mrichardin

Mine is not working too. Only display osd overlays on a black background. No video from the camera (canon 550d). Bought it from Flash RC in France. Got it yesterday.
If i put cable direct to video Tx, no problem, got the video.

I recently posted on the WK-M forum regarding a similar problem that I was having with my new DJI OSD module not passing the video through from my FPV camera, but yet passing through video from other cameras that I hooked up to it.

After contacting DJI I was pleasantly surprised that they got back to me within hours & acknowledged the problem & stated that they will have it fixed in a few days. DJI then asked me who my dealer was and they contacted that dealer, Atlanta Hobby, on my behalf. That dealer is sending me a prepaid label to sent this unit back to them. The dealer is awaiting delivery of a batch of new DJI OSD's that will have a correction for this problem. The dealer stated that they will ship me the new OSD unit as soon as they receive it from DJI and that it should only be a matter of a few days.

Originally Posted by Panza

tu as un des premiers osd qui est donc defectueux. Tu l'as commandé ou ?

chez FPV4ever ,ils m'en renvoient un nouveau dès qu'ils les recoivent.

Edd as soon as they are released (retractable legs), can you post your reviews?
Were are you going to mount the antennas?

Regards

PD well, are you going to buy them? Since you have all dji componnents, I thought the answer is yes !!!