Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
This thread is privately moderated by quitcherbitchen, who may elect to delete unwanted replies.
Old Sep 24, 2012, 10:10 AM
quitcherbitchen is offline
Find More Posts by quitcherbitchen
Bombs away!!!
quitcherbitchen's Avatar
Build Log

Leading Edge Slat for Super Cub Wing


I took some better pictures of my second Super Cub wing that has L-5 Sentinal leading edge slats. These are very scale and use the 2 to 1 rule to opening to exit. They are a bit of a pain to make.
Sign up now
to remove ads between posts
Old Feb 04, 2013, 02:30 PM
rhokita is offline
Find More Posts by rhokita
Registered User

LE slats


I have a Fiesler Stork kit that I will build one of these days. The kit did not include the LE slats. Apparently, the designer did not think it was worth the effort to install them. I'm kinda curious if installing the LE slats is worth the effort. Were they significantly effective on your cub? Are they fixed? I read somewhere that the real Stork were initially adjustable, but later designs were fixed. Anyway, just curious. Much later when I complete some of my current projects, I'll tackle the Stork.
Old Feb 04, 2013, 04:53 PM
quitcherbitchen is offline
Find More Posts by quitcherbitchen
Bombs away!!!
quitcherbitchen's Avatar
Mine are fixed and honestly I have flown with them so long I can't tell you what it was like before. All my Cub wings have them. I think they work as I have never had a tip stall but there is a lot of wash out in these wings. I have flown them heavy with cargo too. My friend has a 1/2 Scale(I think) Storch that he flies and is somewhat a Storch expert. He actually owned a real one but never flew it as he sold it for the one 1/2 scale he has now. He said the early versions had adjustable but made such a racket opening and closing that the pilots would tape them open. So later they just designed them that way.--fixed
Old Feb 04, 2013, 07:37 PM
rhokita is offline
Find More Posts by rhokita
Registered User
The Storch is my favorite STOL airplane. One of these days, I'm gonna build the kit but with one difference in scale (blasphemy!, It's a standoffish anyway), I'm going to use tundra tires on the landing gear for easy rolling over grass. I like the fat tire look (not to be confused with Fat Tire Beer). I would also like to install a FPV system into it, if I can figure out how to do so without destroying the relative scale look (ignoring fat tires). Btw, I'll probably install removeable LE slats (to be removed if it induces adverse flying characteristics).
and see what happens (I like to tinker).
Old Feb 04, 2013, 07:51 PM
quitcherbitchen is offline
Find More Posts by quitcherbitchen
Bombs away!!!
quitcherbitchen's Avatar
Because air doesn't scale I don't think it would hurt you aerodynamically. I am "still" building my Japanese Stella which is a Japanese Storch. It had full leading edge slots and I have actually finished the wing, but not flown it yet as I am still on the landing gear. I will research some of my resources I used and send the links to you.
Old Feb 04, 2013, 09:32 PM
rhokita is offline
Find More Posts by rhokita
Registered User
Please do send links and pictures of your Stella. I would like to build mine the same.
Thanks! Bob
Old Feb 04, 2013, 09:37 PM
rhokita is offline
Find More Posts by rhokita
Registered User
Btw, when you finish it, please email where you are going to fly it so that I can drop by and watch it fly. I live in Gardena (91&110), which isn't that far away from Altadena.
Old Feb 04, 2013, 11:32 PM
quitcherbitchen is offline
Find More Posts by quitcherbitchen
Bombs away!!!
quitcherbitchen's Avatar
Sure thing. Your are close.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Fixed leading edge slats, examples RCB1 Fuel Plane Talk 33 Oct 06, 2016 12:15 PM
Discussion Working leading edge slats for EDF airliners?? Doug W Foamy EDFs 4 Jun 08, 2011 01:00 PM