Filippo Materazzi Design - Armonia - RC Groups
Thread Tools
Sep 24, 2012, 06:30 AM
Registered User
Discussion

Filippo Materazzi Design - Armonia


Hello,
it's the first time for me in this forum. I hope my thread is in the right place.

I'm Filippo Materazzi and I live in Italy. After many years in designing model airplanes, this year I became a designer for Techone, a chinese company, world leader in foamies/indoor production. I started to design for them a model line with the goal to realize the most advanced planes and the highest quality kit. After a lot of work I can say I'm very satisfied and I would like to present my planes to you! I hope you like them too.
First of all the Armonia, expecially made for indoor F3P.
Here its description from the official website: www.fmdplanes.com

"The Armonia is an innovative and high quality F3P plane especially designed to be strong but very light. It is made with 3 mm depron milled (painted on both sides!) and HCF, a special technique that uses a transparent film glued on depron. In the kit it is included all the professional materials to complete the plane, like carbon rods (pre-cutted!), super light carbon control horns, thread, clips and velcro. Thanks to its special design it is able to fly extremely slow and precise, but it is able to perform pretty fast maneuvers too, like snaps and spins. It is made to be symmetric to obtain wonderful knife edges. The Armonia is the perfect plane for competitions but also for the beginners of indoor flight, thanks to its incredibly smooth and easy flying.".

And here the details:
FUSELAGE 95 cm / 37,4”
WINGSPAN 84 cm / 33”
MATERIALS 3 mm milled depron, HCF (depron and mylar), carbon
FLYING WEIGHT (without battery) about 80-90 g / 2,82-3,17 Oz
FLYING WEIGHT (with battery) About 90-110 g / 3,17-3,88 Oz
BOX CONTENT depron model parts, pre-cutted carbon rods (1,5 mm rods, 1,3 mm rods, 1 mm rods, 0,8 mm rods), pre-cutted carbon strips (0,3 mm strips, 0,5mm strip), 0,5 mm carbon control horns, micro clips, male/female velcro, wire

My Armonia prototype weights 104g withpretty standard equipment: Hacker A10-15S, ESC X5 pro, 3 JR DS319HV and 18 grams battery.

here the video of the first flight: http://www.fmdplanes.com/index.php?o...=21&Itemid=150

I hope you like it! Thank you for your attention!

Ciao

Filo
Last edited by FiloMaterazzi; Sep 25, 2012 at 01:30 PM.
Sign up now
to remove ads between posts
Sep 25, 2012, 10:57 AM
"Free" in Christ! #F3P
Free's Avatar
Looks nice!!

Free
Last edited by Free; May 13, 2014 at 01:41 AM.
Sep 25, 2012, 01:29 PM
Registered User
Ops...
Yes, of course it's the opposite...
Sep 25, 2012, 04:04 PM
"Free" in Christ! #F3P
Free's Avatar
Haha,

I watched the vid, it performs really nice!

Free
Sep 27, 2012, 08:45 AM
F3A Team Finland
Finnspeed's Avatar
Now, that is a beautiful F3P plane! It seems to be somewhat smaller than what seems to be the trend now but in the same time the weight is pretty good. Should be competitive in good hands.

Have you got any info on availability dates and dealers? My fingers are itching to start a new build but I don't have the airframe parts yet.
Sep 27, 2012, 11:09 AM
Foamies for life! #f3p
Not Free's Avatar
Thats SWEET!!


Where could a get one??

Not Free
Oct 04, 2012, 11:54 AM
Aerodynamically challenged
3Deranged's Avatar
Nice work!
Oct 06, 2012, 08:31 PM
was geht , müssen unten kommen
Keenan smith's Avatar
Cool! i want one!!K
Oct 18, 2012, 05:26 PM
Registered User
I have one!!!!
Armonia
Oct 19, 2012, 07:15 PM
road wart
racie34's Avatar
USA dealer?
Oct 20, 2012, 11:16 AM
Registered User
it's very nice...i love it Filippo Materazzi
Last edited by gord ang; Oct 20, 2012 at 12:55 PM.
Oct 20, 2012, 11:55 AM
"Free" in Christ! #F3P
Free's Avatar
Where did you order it from?

Free
Oct 25, 2012, 07:29 AM
Registered User
Hi! About availability...both Armonia and Metis are ready but it depends on dealers... I mean when they will arrange the order to Techone.
In Europe Hacker motor will be a big distributor and it will be easy to find them in many european shops.
In USA too there are some companies interested to become dealers... I hope it will be possible!

Yesterday arrived to my home both planes and like expected the kit quality, especially the painting is really better than the prototypes... colors are really brilliant!!
I have just started to build a new Armonia with Kaukoranta counter rotating system...it should be fantastic!
Oct 25, 2012, 08:17 AM
F3A Team Finland
Finnspeed's Avatar
Filo, please post some pictures of your build and if possible, weigh the foam parts. We F3P geeks love to compare different designs.

By the way, there's a rumor that our local distributor of Tech One kits in Finland may have stock soon.
Oct 25, 2012, 08:50 AM
Registered User
I get one, and already FF and fly very nice, I love it....

my set up as following :-
A10-5s hacker
Daimond d47 all around
castel creation 10 amp
battery 380 m(20g)
pop gws 8x4(slow)

tks


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Poll Do you think a chief designer of RC planes can design and build real plane? jcervantes11 Chit Chat 31 Mar 17, 2014 09:45 PM
Help! Tritle designed Dare Design & Eng, KITS dostacos Scale Boats 0 Mar 15, 2012 11:22 PM
Discussion The USS EnterpriseA design Is this permissible in designing AzTrekie Foamies (Scratchbuilt) 6 Mar 13, 2012 11:50 PM
Discussion Armonia tabstein Mexico 26 Jul 10, 2008 07:25 PM