I built this to make a video build log tutorial. Here: https://www.rcgroups.com/forums/show....php?t=1738108

Looks like this:



It's 362mm from motor to motor. It has polycarbonate center plates and coated aluminium arms. Looks awesome. Arms are 7mm thick and 24mm wide. They are unusual, yet strong and good looking. Here are the specs:

-F-20 SimonK escs
-RCX 2822/8 2600KV motors (tons of power. The quad weights under 700 grams and each motor has 850 grams of thrust... hehe...)
-KK2 flight controller
- 8045 props
- Builts using a distribution board. (it is sitting under the KK2 board)

(Devo RX-802 receiver not included!)

I will include some spare standoff and nylon screws.

This quad is far better than a DJI F330 frame for example.

Here's a flight video shot today:

Building A Quadcopter: Reversing Channels & Flight Demo (Part 6) (6 min 22 sec)

Asking price is 170$ firm, including paypal fees and shipping worldwide.

Reason for selling: I had planned to build a 375mm frame but I measured to the end of the arms instead of the center of the motors so turns out it's 362mm instead of 375mm. I will build another one and hopefully I get the arms size right this time!

This quad is brand new. New motors, new ESCs, new KK2 board, and newly built frame.

PM if interested.

Best,
Chris

Very nice build sir

Originally Posted by tech69x

Very nice build sir

Well, thank you. It is indeed darn nice. Just a bit smaller than what I intended it to be.

Best,
Chris

Very nice indeed. This is a steal at $170. Nice work Chris!

What battery are you running on this? 3S/4S and what mAh?

Looks awesome. With so much lifting capacity, this would be great for an acrobatic FPV quad...

I use 2200mAh 3s 40c batteries.

C.

I PMed you yesterday, did you get it?

Originally Posted by tasop7

I PMed you yesterday, did you get it?

Yes, I got your pm. Sorry, someone else said he wants it and he got my paypal. He told me he would have paid by now so not sure what he's doing. I don't appreciate it, though. If you get someone's paypal you should pay or send a pm to explain why payment is delayed.

I'm off work in 4 hours and if he still hasn't paid when I get home, I'll pm you and you can have it. And then there's a third person in line after you, too! Hence why I don't appreciate the buyer taking so long to pay...

I'll drop you a line tonight.

Best,
Chris

Just curious about your motor selection... How much stick does it take to hover? Less than half? The Kv seems a bit high but it seems to fly fine with those 8" props. What is the AUW?

Can't really answer your question accurately regarding how much stick I need to hover this because I use a super steep throttle curve in my radio. I hover at around 25% stick.

The wweight is about 700grams including battery and RX.

Best,
Chris


Oh, by the way, this is sold now so I'll close this thread. I'll be building a very similar one with the intentions of selling it sometimes this week. PM me if you're interested, or keep an eye on the classifieds.