DiaLFonZo-Copter - FPV SpyderQuad - Page 5 - RC Groups
Thread Tools
Nov 03, 2012, 05:49 PM
Carbon Flyer
Techcoder's Avatar

Wire Holes


Those are clean looking wire holes in the tubes, gives it a nice look.

Matt
@flycarbon.com
Sign up now
to remove ads between posts
Nov 03, 2012, 06:54 PM
Having fun again!!
MTHead4u's Avatar
Quote:
Originally Posted by Dialfonzo
Hi All,

Today i got the time to make a Jig that screw on top of my CNC and allow me to cut holes in the tube arm for wires.

Here is what it look...
Looks nice and clean.. Those still the 225mm booms?
Nov 04, 2012, 12:02 AM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Quote:
Originally Posted by Techcoder
Those are clean looking wire holes in the tubes, gives it a nice look.

Matt
@flycarbon.com
Thanks .. they look to be pretty strong.
No sign of loose in strengh at all.

I will do double hole (top and bottom) on the one i ordered lastly from you.
Will be for the Y6 and since they are 1.5mm wall should not have any problem.

Quote:
Originally Posted by MTHead4u
Looks nice and clean.. Those still the 225mm booms?
Yes the one i ordered from FlyCarbon
Nov 04, 2012, 01:37 AM
Registered User
from a materia stress point of view, its pobably better to locate the cutout on the side of the tube, rather than the top or the bottom.

the compression/tension in the tube is taken by the top and bottom surfaces of a round tube, so best not to locate the hole there
Nov 04, 2012, 04:48 AM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Quote:
Originally Posted by ed_jza80
from a materia stress point of view, its pobably better to locate the cutout on the side of the tube, rather than the top or the bottom.

the compression/tension in the tube is taken by the top and bottom surfaces of a round tube, so best not to locate the hole there
Yes more probably.
But the thing is.. does the boom is still very strong with the hole.?
I might say yes
Nov 06, 2012, 06:45 AM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Ok...
After almost one and a half month.. Mike receive the frame in Tahiti.
What a long shipping time...

So pictures and video comming..
Nov 06, 2012, 08:35 AM
Registered User
I have more of the CF tubes on the way from the same guy. I like being able get the thick wall tubes. Before I had to make them....putting a 14mm in a 16mm tube takes longer then you think. I am ready for bigger set of hex plates the one in the pic is too small.
The camera mount is the for your fpv spyder
Nov 07, 2012, 07:23 PM
Registered User
Quote:
Originally Posted by Dialfonzo
Ok...
After almost one and a half month.. Mike receive the frame in Tahiti.
What a long shipping time...

So pictures and video comming..
I'm ready !
Nov 09, 2012, 11:13 AM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Got some feedback about the frame.
Here are some modifications done...

Let me know what you think...


HD Here



Nov 09, 2012, 11:39 AM
Registered User
Nice way to keep the ESC cool and it would make for a nice clean build. Do you think the prop wash would whistle when it hit the hole on the top?
Nov 09, 2012, 11:41 AM
DiaLFonZo - UAV/Drone
Dialfonzo's Avatar
Quote:
Originally Posted by NaterPin
Nice way to keep the ESC cool. Do you think the prop wash would whistle when it hit the hole on the top?
Only flying will tell.. lol
Whisling Quad..
Nov 09, 2012, 04:27 PM
mike76
hi
here some picture of the quad.
now i working to have nice video (no vibration and jello).
Nov 09, 2012, 04:34 PM
Registered User
Nice what is you arm length and what size props?
Nov 09, 2012, 04:53 PM
mike76
270mm arm length and 10x4.7 apc prop.
i thing my motor is just for that quad.
actually i have this one :
4x rc timer 28.36.11 750kv
4x esc rc timer 30A
1x tx 5.8ghz 400wm + spironnet antenna 5.8ghz imc.
1x fpv cam foxtech 750tvl
1x 3S 750 mah for tx and fpvcam.
1x 3S 5000mah.
i would like to change my motor for a litle big one to have more fly time.
now i have 8.30minute fly time.
Nov 11, 2012, 12:16 PM
mike76
ok
here a video test for vibration and behavior.
FPV Quad Dial-Fonzo spyder test (7 min 33 sec)


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion DiaLFonZo-Copter - DJI SpyderQuad Upgrade Dialfonzo Multirotor Drone Talk 502 Aug 05, 2014 09:53 AM
New Product DiaLFonZo-Copter Boom Block Dialfonzo Multirotor Drone Talk 88 Mar 21, 2014 06:34 AM
New Product DiaLFonZo-Copter - MicroTrinity Quad Dialfonzo Multirotor Drone Talk 6 Jul 09, 2012 09:26 PM
Discussion FPV plate Soft mounted - Luis & DiaLFonZo-Copter Dialfonzo Multirotor Drone Talk 5 Jan 05, 2012 01:04 PM