Thread Tools
Nov 27, 2003, 09:51 PM
Registered User

Help - Reversing an Astro 60

Hi Guys,

Another question regarding my Astro 60. I just got a Modelair-Tech belt drive (Thanks Sabrejock!) and need to reverse the rotation of my superbox equiped Astro 60.

I read I need to find the "neutral point" of the motor. From what I understand, this is done my loosening the 4 long motor bolts and rotation the black casing slightly until the amps are at the lowest.

First Question: I plan on running the motor at 36 cells. Do I need to find the neutral point using this many, or will say 12 cells be fine.

Then I understand that to find the proper timing, I should rotate the casing untill there there is a no load draw of about 2 to 4 amps? Does anyone know a good target?

Here's where Im lost. To reverse the rotation of the motor, is it just a matter of moving the motor cases to either side of neutral point. IE, turing left will make it turn left, right turn right?

Anyone care to suggest a few props for this setup?
Astro 60 11 turn, 36 2400mah, 2:1

Thanks for your help!

Sign up now
to remove ads between posts
Nov 28, 2003, 08:27 AM
Registered User
Sabrejock's Avatar
Dave: I've e-mailed you a copy of Astro Bob's procedure. Tex.
Nov 28, 2003, 05:45 PM
Registered User
Got it.

Thanks Tex!
Nov 28, 2003, 09:40 PM
Registered User
BEC's Avatar
Ah good - much better than me trying to explain it......

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
How hot is too hot for an Astro 60? DeanW Power Systems 7 Aug 17, 2005 07:25 PM
Reversing an Astro 010 Brushless Farm Flyer Electric Plane Talk 5 Jul 31, 2005 12:16 PM
Help with an Astro 10/14 Repair John_C Micro Helis 5 Mar 13, 2005 02:33 PM
Reversing an Astro 40G shv2sail Power Systems 1 Oct 08, 2004 12:58 PM
Reversing an Astro 020 motor tenover Electric Plane Talk 10 Jun 26, 2003 10:19 PM