Thread Tools
Oct 23, 2012, 08:21 PM
Visitor from Reality
My regularBee is covered in SoLite, but that's a bit too Lite for a biggerBee. Monokote is maybe a tad too heavy and shrink-y here. UK based Solarfilm would be great, but is hard to find over here.

Oddly enough, one of my other favourites - on account of its cheap and works - is 'Towerkote' from guess where? Not many colours, but it does the job and the many models I've covered in it have given me no bad issues.

All my Lazy's have been done in the kit's scalloped trim look - using the cardboard templates I made for my firstBee! The LazySpeedy is a little more freelance, but there's just something about the Clancy Lazytrim that looks too good to leave off. PresentBee is mostly cream with red trimmings.

The fuselage is a little less fiddly

D
Sign up now
to remove ads between posts
Oct 24, 2012, 11:01 PM
Balsa Dust and CA Fumes
Dillion's Avatar

Finial Plans


Here are the finial plans. Huge file. If you want a copy, just ask.
Oct 25, 2012, 06:58 AM
Build more, websurf less
FlyingW's Avatar
Dillion,

Nice wing. I recommend a 1/8" center joiner laminated from 1/16" ply and 1/16" balsa. It should extend to the W2 rib.

Also the little bit in the aft tip can be eliminated - I added a similar part for some reason in a Speedy Bee wing and it drives me crazy (red arrow in photo).

Paul
Oct 25, 2012, 03:40 PM
Balsa Dust and CA Fumes
Dillion's Avatar

With Dihedral Guide


I added a dihedral guide as per Paul's suggestion.
Paul I want your full name and email so I can give you the credit you deserve.
Oct 25, 2012, 10:04 PM
Flying Low
cbarnes0061's Avatar
I would love a copy of it. I will build a Bee in the next year or so and I personally would want ailerons on it.
Oct 26, 2012, 12:01 PM
Balsa Dust and CA Fumes
Dillion's Avatar

Finished Plan


I tried to upload the file. The site won't let me, saying the file is to big. They allow a 3 mg file limit and this as a PDF is 53 mg. i would like to post the PDF here but till I find out how. You can find the Plans on my website here> http://www.rcflyer.us/Plans_Lazy.html
ENJOY and Thank you. I will continue with the build
Last edited by Dillion; Oct 27, 2012 at 03:15 PM.
Oct 30, 2012, 03:37 PM
Balsa Dust and CA Fumes
Dillion's Avatar

Began covering


I hope everyone is safe and well. If you could, would you post a note saying your okay from the storm SANDY.

Anyways, I just have bunch of sticks and leaves around my property. I have some very big pines and populars. They held up well, just shed some dead branch. We are fine over all.

I'm post the rudder and elevator I covered. Went with the red and yellow theme. Outlined the red with white pin strip for a more finished look. I suppose the wing is next.
Nov 07, 2012, 08:34 AM
Balsa Dust and CA Fumes
Dillion's Avatar

Pin Stripping


The pin stripping I put down is all coming up. What tape should I be using?
Nov 07, 2012, 08:36 AM
Registered User
TexasClouds's Avatar
did it get stretched when you put it down?
Nov 07, 2012, 09:56 AM
Visitor from Reality
Pin stripes are delightful.

Have never been brave enough to try, success here is eagerly awaited.

D
Nov 12, 2012, 07:13 PM
Registered User
Greg Knipp's Avatar
Does anyone know what happened to Dillion?? I have PM'ed him and sent e-mails to the website that has this drawing stating that the file will not display and am not getting any response???
Nov 14, 2012, 05:54 PM
Balsa Dust and CA Fumes
Dillion's Avatar

Loads Okay


Gregg. I just loaded the file from my web site and it seems ok. Take a while to load, very large file. Where else can I park the file? It's 51mgs. Heres the link directly: http://www.rcflyer.us/Plans-ALL/Lazy...nal%20Size.pdf


I had some nice days around here to fly and took advanage of it. I broke a cub I had so have been working on repairs.

Will be back to the Bee very soon.
Last edited by Dillion; Nov 14, 2012 at 06:00 PM.
Nov 14, 2012, 06:11 PM
Registered User
TexasClouds's Avatar
Get that Bee in the air! I flew mine last weekend in some high winds and had a blast shooting elevators.
Nov 14, 2012, 09:11 PM
Balsa Dust and CA Fumes
Dillion's Avatar

Wing


Got the wing covered on both sides. no instripping yet.
Nov 15, 2012, 07:01 AM
Registered User
TexasClouds's Avatar
Niiice!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale BNF Clancy Aviation Lazy Bee 40" wingspan LIZZAY Aircraft - Electric - Airplanes (FS/W) 7 Jul 12, 2012 04:43 PM
Discussion Help: Brand new UMX gee bee ailerons going same direction. 2yy4u Scratchbuilt Indoor and Micro Models 11 May 01, 2012 03:21 AM
Discussion lazy bee aileron with twin motors, any better? nemoskull Scratchbuilt Indoor and Micro Models 0 Mar 12, 2011 12:36 PM
For Sale Clancy Lazy Bee Aileron Wing Plan rjapodaca Aircraft - Fuel - Airplanes (FS/W) 1 Sep 06, 2008 12:42 PM
For Sale Clancy Lazy Bee Aileron Wing Plan rjapodaca Aircraft - Electric - Airplanes (FS/W) 0 Sep 05, 2008 06:47 PM