Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Oct 07, 2012, 01:42 AM
AcroFPV is online now
Find More Posts by AcroFPV
we dont NEED roads!
AcroFPV's Avatar
Quote:
Originally Posted by magic_marty View Post
what brand of props are you using? there is so many to choose from.... i am wanting to build my first tri and this looks like a very easy setup for my first...

Thanks a bunch
Marty if you are shopping for props, your not going to find better props for a better price than here: https://www.rcgroups.com/forums/show....php?t=1746276
Sign up now
to remove ads between posts
Old Oct 07, 2012, 10:26 AM
NYbySky is offline
Find More Posts by NYbySky
Registered User
NIce build i might do one my self
Old Oct 07, 2012, 12:58 PM
magic_marty is online now
Find More Posts by magic_marty
<Marty>
thanks for the info and links to the props guys...i am working with a small budget and will take me some time to get all the parts together.I will probably order most of the stuff from rctimer due to there good prices and free shipping..wondering if anybody has a idea on how the t-copter could be made foldable? perhaps the front boom could be hinged somehow where it could fold back? would make it easier to transport to flying locations...

thanks again...
Old Oct 07, 2012, 01:06 PM
rcflyers is offline
Find More Posts by rcflyers
Registered User
rcflyers's Avatar
removed
Last edited by rcflyers; Mar 17, 2013 at 01:35 PM.
Old Oct 07, 2012, 01:37 PM
magic_marty is online now
Find More Posts by magic_marty
<Marty>
i looked at that one but the T-copter seems it would be easier to build and lighter as you mentioned in first post...i was thinking the front boom could be a 2 piece design with some sort of locking devise in the middle which would allow it to easily fold ...but not in flight..lol
Old Oct 07, 2012, 03:05 PM
rcflyers is offline
Find More Posts by rcflyers
Registered User
rcflyers's Avatar
removed
Last edited by rcflyers; Mar 17, 2013 at 01:36 PM.
Old Oct 07, 2012, 10:26 PM
magic_marty is online now
Find More Posts by magic_marty
<Marty>
got a good idea on how to make it foldable...on the tail boom front where it meets the front boom add a dial pin or nylon threaded insert by drilling a hole and gluing it in...then on the front boom cut in middle and remove half the thickness on both ends where it meets in the middle so when it meets it will still be the same thickness..then drill a hole where it will slide over the pin and use a clip for dial rod or nylon wing nut for threaded insert to secure it to the pin...
Old Oct 08, 2012, 12:44 AM
magic_marty is online now
Find More Posts by magic_marty
<Marty>
need a little advise ....would these motors perform well or should i go with the rctimer motors?
thanks and sorry for questions ...

http://www.hobbyking.com/hobbyking/s...ess_Motor.html
Old Oct 08, 2012, 01:17 AM
rcflyers is offline
Find More Posts by rcflyers
Registered User
rcflyers's Avatar
removed
Last edited by rcflyers; Mar 17, 2013 at 01:36 PM.
Old Oct 13, 2012, 07:08 PM
magic_marty is online now
Find More Posts by magic_marty
<Marty>
Quote:
Originally Posted by rcflyers View Post
The wood I have used is 12mm x 12mm square section pine.
The front arm is 690mm long
The rear boom is 540mm long
The C of G is about 195mm back fron the front edge.
how come the rear boom looks longer in the pictures? or is it just me?

thanks...
Old Oct 13, 2012, 07:20 PM
Steveis is online now
Find More Posts by Steveis
AVR Dude
Quote:
Originally Posted by magic_marty View Post
how come the rear boom looks longer in the pictures? or is it just me?

thanks...
It's probably just you. I've seen it in full 3D.
Old Oct 14, 2012, 01:43 AM
rcflyers is offline
Find More Posts by rcflyers
Registered User
rcflyers's Avatar
removed
Last edited by rcflyers; Mar 17, 2013 at 01:36 PM.
Old Oct 14, 2012, 03:07 PM
magic_marty is online now
Find More Posts by magic_marty
<Marty>
got the frame built and made it foldable but i still need to figure out a locking mechanism for the arms...will post some pics soon.
Old Oct 14, 2012, 04:24 PM
magic_marty is online now
Find More Posts by magic_marty
<Marty>
here is some pictures of the folding arms...
Old Oct 15, 2012, 02:01 AM
rcflyers is offline
Find More Posts by rcflyers
Registered User
rcflyers's Avatar
removed
Last edited by rcflyers; Mar 17, 2013 at 01:36 PM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion My take on the T-copter tosjduenfs Scratchbuilt Multirotors 19 Oct 10, 2012 08:12 AM
Wanted WTT T-rex 250 for quad copter TK421 Aircraft - Electric - Multirotor (FS/W) 1 Jun 08, 2012 10:35 PM
Sold T-Rex Clone Copter-X 250SE for Micro Heli or MQX aviator422 Aircraft - Electric - Helis (FS/W) 4 May 24, 2012 03:56 PM
Sold Lotus T 380 quad copter with spektrum RX Heavy Chevy Aircraft - Electric - Multirotor (FS/W) 23 Mar 29, 2012 11:12 PM
For Sale selling t-rex - blade cx2 and easy copter + apache ah64 all for 150 + p&p the grounds 2 hi Aircraft - Electric - Helis (FS/W) 1 Aug 10, 2007 07:35 AM