HV ICE2 outrunner mode or 12Khz switching - RC Groups
Thread Tools
Sep 09, 2012, 03:20 PM
Registered User

HV ICE2 outrunner mode or 12Khz switching

I am using a hacker A50 turnado 10 pole out runner on a large EDF Byron f-16 with Byron fan146mm with an ICE2 HV 160 controller. which is better for switching freq, out runner mode ( the settings are not defined) or the formula from castle kv x pole count x nominal volt / 20 and round down. So 580 x 10 x 46.8 / 20 = 13573 down to 12khz

and while we are at it timing low ,med ,high? thanks for your help
Sign up now
to remove ads between posts
Sep 10, 2012, 10:54 AM
Registered User
RS Rogers's Avatar
I personally would recommend the 12khz

Sep 10, 2012, 11:37 AM
Registered User
PWM 12kHz, timing Low
Sep 10, 2012, 06:12 PM
A man with too many toys
Originally Posted by barzaun
pwm 12khz, timing low

Sep 10, 2012, 08:24 PM
Registered User
OK thanks! to all who replied, 12khz switching and low timing it is

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Mini-HowTo Turnigy 9x v2 standard firmware, mode switch 3 position switch for dji naza gps :) stein3247 Multirotor Drone Electronics 3 Jul 20, 2012 05:23 AM
Discussion Mode 1, Mode 2, Mode 3 or Mode 4? rexless Beginner Training Area (Heli-Electric) 21 Jul 19, 2012 11:42 PM
Sold Castle Creations HV ESC's: Ice2 60HV (new), Ice2 80HV (new), 85HV (used), 110HV (new) jgalexander Aircraft - Electric - Power Systems (FS/W) 11 Apr 26, 2012 08:26 AM
Sold E-Flite 30-Amp Pro Switch-mode BEC Brushless ESC and PKZ BL 15 outrunner Gravity Dodger Aircraft - Electric - Power Systems (FS/W) 1 Oct 05, 2009 04:47 PM
How's the gov mode on CC45 HV for outrunners? msg73 Castle Creations 1 Aug 02, 2005 07:36 PM