Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Sep 07, 2012, 06:41 AM
Banjofrog is offline
Find More Posts by Banjofrog
Geez That's A Big Fly
Banjofrog's Avatar
New Product

New Durafly Monocoupe 110 Special


Looks oh so nice, not many knew this one was coming.

HobbyKing Daily - Durafly Monocoupe (2 min 14 sec)


History...........
Woody Edmondson, airshow pilot and aerobatic champion, thrilled airshow crowds with his Monocoupe 110 Special Little Butch throughout the late 1940s. The Monocoupe 110 Special was a special design built for racing and aerobatics from the basic Monocoupe of the 20s and 30s, the airborne sport coupe of the era.

The original Monocoupe design came from Luscombe's desire to build an enclosed two-place aircraft for business or person use, something lighter and more comfortable than open-cockpit biplanes. Luscombe was somewhat influenced by the Belgian Delmonty-Poncelet Limousine, a high-wing monoplane with a side-by-side enclosed cabin and the reverse curve rear fuselage lines that were to become one of the signature identifier features of the Monocoupes. Luscombe founded Central States Aero Company and hired Clayton Folkerts, a young self-taught designer. In 1928, the Mono 22 was the first light aircraft awarded an Aircraft Type Certificate (number 22) and in 1930 it was fitted with a Velie M-5 engine to become the Model 70. Central States Aero Company became Mono Aircraft, Inc., of Moline, Illinois, a subsidiary of the Velie Motors Company, and the Model 113 and the Model 90 followed.

The Model 110 was basically a Model 90 with a 110 hp Warner Scarab radial engine. The Model 110 Special, a clipped-wing version of the 110, grew out of racing pilot Johnny Livingston's desire to have a faster aircraft for the National Air Races. In 1931 his 110 was streamlined with fairings and wheel pants, and in 1932 Livingston asked Monocoupe to shorten the wingspan from the standard 32 feet to 20 feet, reduce the size and shape of the tail, and install a larger 145 hp Warner Scarab engine. The factory shortened the wingspan to just over 23 feet, retaining sufficient wing area to sustain safe flight during high-speed pylon turns. The changes improved the speed from 150 mph to 220 mph. Over several years, a total of ten Specials emerged, seven were built or modified by the factory, and three were modified by homebuilders.

The Monocoupe 110 Special Little Butch, N36Y, was built at the factory in Melbourne, Florida, and test flown on February 3, 1941, by then-Monocoupe president Clare Bunch (Don Luscombe had left the company in 1933). The original base color of the airplane was Monocoupe Blue with an ivory trim. W. J. Coddington bought the aircraft on March 5, 1941, but severely damaged the airplane in a landing accident and returned it to the factory for repairs and resale. Guy Gully of Farrell, Pennsylvania, bought the aircraft on November 16, 1941, but had an accident and sold it to J. D. Reed of Houston, Texas, on August 3, 1943. Reed sold it on March 16, 1944 to W.W. "Woody" Edmondson of Lynchburg, Virginia, who named it Little Butch because of its bulldog-like appearance. Edmondson initially used the airplane for transportation between airports in Virginia and North Carolina where he operated government-sponsored pilot flight training programs during the war. In 1946 he re-entered the airshow circuit and installed a Warner 185 hp Super Scarab. This engine had a pressure carburetor for inverted flying and had a Koppers Aeromatic controllable pitch propeller. He often flew two or three air shows a day all scheduled close to Lynchburg so that he could fly, in his business suit, from one to another.

One day Edmondson severely tested the structural integrity of the airplane by making a high-speed inverted pass and pulling up into a series of vertical rolls. This maneuver always subjected the aircraft to severe negative "g" loading conditions for which the airplane was not originally designed. It went into a series of uncontrollable snap rolls and ended up inverted at about 2,000 feet. Edmondson recovered control but then noticed that the right wing struts had an elbow bend of several inches in them. He reinforced the struts by nesting the next size struts within the existing size streamlined tubing.

In 1946 and 1947 at the Miami Air Manuevers, Edmondson placed second in the aerobatics competition to Bevo Howard in his Bucker Jungmeister, which is also in the NASM collection, but he won in 1948 when the first International Aerobatics Championships were held. Sponsored by Gulf Oil Corporation, he continued to use N36Y on the air-show circuit throughout the east and midwest until 1951. Edmondson sold the airplane to Johnny Foyle, an air show pilot of South Boston, Virginia, on August 22, 1960, who twice flipped the airplane over on landings. Foyle was killed in another airplane accident and John McCulloch, an Eastern Airlines captain from Naples, Florida, bought N36Y on June 18, 1965. McCulloch shipped it to Florida to be rebuilt by Monocoupe specialist C.V. Stewart and then test-flew the rebuilt airplane on March 8, 1966.

McCulloch flew Little Butch throughout the late 1960s and early 1970s from his home in Virginia to airshows all across the eastern half of the U.S, and he frequently flew at the Flying Circus summer air shows in Bealeton, Virginia. McCulloch claims that he is the only owner who never put the airplane on its back. Wishing to preserve this historic and rare airplane, he asked Ken Hyde of Warrenton, Virginia, to restore the aircraft to Edmondson's red and white paint scheme. The airplane flew again in October 1974 and it was then lent to the Shannon Air Museum in Fredericksburg, Virginia. McCulloch donated Little Butch to NASM on December 29, 1981.

Manufacturer: Monocoupe Airplane Co.

Date: 1941

Country of Origin: United States of America

Dimensions:
Wingspan: 6.9 m (23 ft.)
Length: 6.2 m (20 ft. 4 in.)
Height: 2.1 m (6 ft. 11 in.)
Weight, empty: 449 kg (991 lbs.)
Weight, gross: 730 kg (1,611 lbs.)
Top speed: 313 km/h (195 mph)
Engine: Warner 185, 200 hp

Materials:
Fuselage: steel tube with fabric cover

Physical Description:
High-wing, 2-seat, 1940's monoplane. Warner Super Scarab 185, 200hp engine. Red with white trim. Clipped wings

Shaun.
Last edited by Banjofrog; Sep 07, 2012 at 07:01 AM.
Sign up now
to remove ads between posts
Old Sep 07, 2012, 07:09 AM
taz101 is offline
Find More Posts by taz101
Registered User
taz101's Avatar
Yep!! Looks good. They definatly snuck that one through!
Now just to wait for some flite footage!

LURCH
Old Sep 08, 2012, 01:23 AM
Mikey 68 is online now
Find More Posts by Mikey 68
Registered User
Its for sale on HobbyKing
http://www.hobbyking.com/hobbyking/s...00mm_PNF_.html
Old Sep 08, 2012, 04:18 AM
Banjofrog is offline
Find More Posts by Banjofrog
Geez That's A Big Fly
Banjofrog's Avatar
Well one is heading to Western Australia and here is the flight video.....

HobbyKing Product Video - Durafly Monocoupe (2 min 43 sec)


Thanks HobbyKing

Shaun.
Old Sep 08, 2012, 04:30 AM
brett.c is offline
Find More Posts by brett.c
Foam is where the heart is
brett.c's Avatar
I have the hobbyking/artech Decathlon which is a great little flyer (once you've ironed out the bugs) and I was just thinking to myself, I wish Durafly would do a rendition of it in EPO.

But this Monocoupe is even better IMO.
It's going one my Christmas wishlist for sure
Old Sep 08, 2012, 08:53 AM
JimH is offline
Find More Posts by JimH
Happy fly begin
JimH's Avatar
Quote:
Originally Posted by Banjofrog View Post
Well one is heading to Western Australia and here is the flight video.....

http://www.youtube.com/watch?v=-hsFM...e_gdata_player

Thanks HobbyKing

Shaun.
Stop that video at 1:03. Did not know Koala's got that big!
Old Sep 08, 2012, 09:12 AM
Banjofrog is offline
Find More Posts by Banjofrog
Geez That's A Big Fly
Banjofrog's Avatar
Lol........ They must grow them huge in Hong Kong
Old Sep 08, 2012, 11:17 AM
RobMason is offline
Find More Posts by RobMason
Plane Nuts
RobMason's Avatar
Grew up at the Flying Circus with John, Ken and Charlie Culp. Got to play around with the orig Little Butch when I was little. John has built 2 reproductions of Little Butch with modern engines and flies them still - got to fly one a few years ago at Sun-n-Fun. This is a must have for the hanger. Here is the 400HP McCulloCoupe http://www.monocoupe.com/mccullocoupe.htm

Rob
Last edited by RobMason; Sep 08, 2012 at 11:45 AM. Reason: mccollochcoupe
Old Sep 09, 2012, 09:37 AM
moronicus is offline
Find More Posts by moronicus
Registered User
moronicus's Avatar
I am a huge Monocoupe fan, my dad has owned two of 'em including the "Spirit of Dynamite", a clipwing sistership to "Little Butch". I have flown them both extensively.

This model looks amazing, lots of detail. It appears from the video that the wingspan is more like the stock 90-110 or 90-A and not the clipwing 110 Special. I'm sure that that was a design choice to have a stable, better flying model. The clipwing would be so short that it may not fly as well for the average hobbiest (like me) and therefore not a great option for a production RC model. Dad is currently building a scratchbuilt balsa RC Clipwing, probably 1/5th scale. Will be interesting to see how it flies compared to this!
The pictures attached are of the stock 90-A and the 110 Special "Clipwing" for comparison.
Marc
Old Sep 09, 2012, 03:22 PM
Razors edge 29 is offline
Find More Posts by Razors edge 29
QuAd FaNaTiC
Razors edge 29's Avatar
Looks awesome!
Old Sep 10, 2012, 09:21 AM
Markbinim is offline
Find More Posts by Markbinim
Registered User
This looks fantastic,im soooo tempted.I wounder how long before its stocked at the uk warehouse??.
Old Sep 10, 2012, 07:22 PM
Markbinim is offline
Find More Posts by Markbinim
Registered User
Quote:
Originally Posted by Markbinim View Post
This looks fantastic,im soooo tempted.I wounder how long before its stocked at the uk warehouse??.
i couldnt help myself,ordered
Old Sep 10, 2012, 08:17 PM
GTrain is offline
Find More Posts by GTrain
Getting good at foam repair
GTrain's Avatar
Damn so tempted to hit the button - it's been sitting in the cart for 2 days
Old Sep 10, 2012, 10:17 PM
GTrain is offline
Find More Posts by GTrain
Getting good at foam repair
GTrain's Avatar
Just bought the Monocoupe - Damn you RC hobby it would be cheaper to snort crack
Old Sep 11, 2012, 07:21 PM
BRUTUS2238 is offline
Find More Posts by BRUTUS2238
Huge member!
BRUTUS2238's Avatar
This ones a true classic. It will look good sitting in the hangar next to the P.Zone Stinson! Looks pretty good on the wing too. Brutus


Thread Tools