BNF Rusty's Rev-8, OP coptercontrol, Tmotors, Nextlevel Esc's, CM-1 LG and extras - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by kicekilla, who may elect to delete unwanted replies.
Sep 06, 2012, 12:46 AM
Trader Rating: 70
No you cant fly it.
kicekilla's Avatar

BNF Rusty's Rev-8, OP coptercontrol, Tmotors, Nextlevel Esc's, CM-1 LG and extras

Ok guys, well the restaurant I work at has started it's remodel and my hours have been cut so I need the money, so I decided I would sell a few of my toys .

First to go is my beloved sport quad. This bird flys great and has endless options. The REV-8 is a great frame made by rusty that I have setup for more of sport flying but include longer booms to easily convert it into a heavy lifter/AP quad.

This quad has brought me much happiness and sorry to see it go, but hopefully she will go to a friendly home who flies her 3-4 times a week as I did haha. sold as but do assure you that it flys great and will help answer any questions I can. she will be dissassembled for shipping as it would not be reasonable to not.

Flight times:
I have been flying with 9" props on a 2200mAh 4s lipo and get ~8-10 mins safely..
10" with 3s 3300mAh I was getting ~10-12mins
hovers just under 1/2 throttle on both setups

$550 shipped CONUS obo for everything
$440 shipped CONUS for everything minus the OPCC flight controller

Take $30 off if you dont want the trex LG and AR6100e

PM if you have questions or want to see a vid of it flying.

Whats included:

1 x Rusty REV-8 quad frame
- 5 x center plates total
- 12 pair delrin blocks
- 4 x 15" and 4 x 7.5" pultruded carbon booms
- 5 x motor mounts (1 spare)
- 10 x accessory plates
- all required hardware + LOTS of extra hardware and standoffs

1 x OpenPilot CopterControl flight controller
- RX and acc cables included
- Like new and functions flawlessly
- willing to keep if you dont want it

1 x Rusty CM-1 Landing gear w/ bolt for tripod mount (easily mount Gopro)

4 x T-Motor MT2216-12 KV800
- all stock accessories + 2 spare accessory packs
- all function properly and work great
- I used a vibration app to balance all 4 motors

4 x Next Level 30 Amp Multi-Rotor ESC

4 x Gemfan 9" props for 4s opperation
4 x Gemfan 10" props for 3s opperation
1 x TREX 500 LG
1 x Genuine Spektrum AR6100e w/ bind plug

Name: DSCN2688.jpg
Views: 119
Size: 214.6 KB

Name: DSCN2689.jpg
Views: 99
Size: 302.5 KB

Name: DSCN2695.jpg
Views: 76
Size: 166.0 KB

Name: DSCN2696.jpg
Views: 96
Size: 229.2 KB

Name: DSCN2697.jpg
Views: 73
Size: 188.7 KB
Last edited by kicekilla; Sep 06, 2012 at 11:34 AM.
Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Rusty's Rev-8 Frame Kit 13brv3 Multirotor Drone Talk 19 Mar 12, 2015 10:03 AM
Sold Rusty's Rev-8 Heavy Lifter AGL Hobbies Frame with CM-1 Landing Gear and extras kicekilla Aircraft - Electric - Multirotor (FS/W) 2 Jul 17, 2012 04:06 PM
Sold Rusty Rev. 8 frame Blue Collar Aircraft - Electric - Multirotor (FS/W) 2 Mar 19, 2012 09:42 PM
Alert SOLD- Quadcopter-ARF-Rusty's Rev-7 frame, QP FC board, + extras - US $300 shipped Mactadpole Multirotor Drone Talk 3 Oct 12, 2010 11:16 PM
Sold Quadcopter-ARF-Rusty's Rev-7 frame, Quadpowered FC board, + extras - US $300 shipped Mactadpole Aircraft - Electric - Helis (FS/W) 2 Oct 12, 2010 02:23 PM