JTM "THE SPORT JET XXX" by UsaRcJets and Billy D - Page 26 - RC Groups
Thread Tools
Jan 26, 2013, 05:03 PM
2018 EDF Jet Jam June 14-17
Robert Belluomini's Avatar
Only if you are paying the bill, Billy.
This is going to be a flying event Sun up to Sun down! Extra activities yet to be determined.
Sign up now
to remove ads between posts
Jan 26, 2013, 05:53 PM
Need 4 Speed!
pdawg's Avatar
Please retain a speed event!
Latest blog entry: original Y/A F-18 Kit
Jan 26, 2013, 05:56 PM
aka JetMan Joe
MCSGUY's Avatar
+1!
Jan 26, 2013, 08:05 PM
Registered User
kevin's Avatar
Yes, bob please retain the speed event so someone else can see what it feels like
Jan 27, 2013, 12:57 AM
aka JetMan Joe
MCSGUY's Avatar
Quote:
Originally Posted by ApexAero
I usually tape off the surface then layout the opening , score it with a blade a few times until it slices through, it looks like a mouse got a hold of them edges man!
Thanks man, night and day
Jan 27, 2013, 07:55 AM
2018 EDF Jet Jam June 14-17
Robert Belluomini's Avatar
Quote:
Originally Posted by kevin
Yes, bob please retain the speed event so someone else can see what it feels like
Sorry I all ready volunteered you to do the radar runs.
Jan 27, 2013, 10:32 AM
Registered User
BILLYDSRC's Avatar
Bob, Without Keven on the gun it will not be a real speed run
We use him as a target to aim at

Quote:
Originally Posted by Robert Belluomini
Sorry I all ready volunteered you to do the radar runs.
Jan 27, 2013, 11:13 AM
2018 EDF Jet Jam June 14-17
Robert Belluomini's Avatar
Exactly that is why I ordered special shsirts for Kevin......... You know the shirts that have a Bullseye printed on the front and back to give that perfect target for the speed run.
Jan 27, 2013, 11:21 AM
Registered User
BILLYDSRC's Avatar
Got it......

Quote:
Originally Posted by Robert Belluomini
Exactly that is why I ordered special shsirts for Kevin......... You know the shirts that have a Bullseye printed on the front and back to give that perfect target for the speed run.
Jan 27, 2013, 11:26 AM
2018 EDF Jet Jam June 14-17
Robert Belluomini's Avatar
See Kev we need you there!!!!!!
Jan 27, 2013, 01:03 PM
Registered User
kevin's Avatar
It's all fun and games until someone goes 199 and crashes

Billy, get going on my xxx so I can think about the speed runs
Jan 28, 2013, 04:21 PM
Some Girls r Bigger thn Others
swps's Avatar
So, I ordered my servos. I went High Voltage. I'm hoping the electric retracts are ok on 7.4v, if not I'll use a Spektrum VR5203 to step it down to 6.0v for them.

Here's what I got:
Ailerons: Hitech HS-5565MH -Standard Size servo Metal gear 194oz/.09 sec
Flaps: Hitech HS-5685MH - Standard Size servo Metal gear 179oz/.17 sec
Rudder: Hitech HS-5087MH - Mini Servo Metal Gear 60oz/.13 sec
Nose Steering: Hitech HS-5087MH - Mini Servo Metal Gear 60oz/.13 sec
Elevator: JR DS390HV - Precision Mini Metal Gear 75oz/.13

Keeping my fingers crossed they all fit, but looks like they will and should be a good choice for this plane. I used the recommended torque ratings for the BVM Electra as my guide along with the info and pics MCSGUY has posted (Thank you!) and the info BillyD has told me.
Jan 28, 2013, 04:39 PM
Registered User
BILLYDSRC's Avatar
I tested the retracts with 6.6v A123 pack and they worked great. But i don't know if they will work with a 2s Lipo?

Quote:
Originally Posted by swps
So, I ordered my servos. I went High Voltage. I'm hoping the electric retracts are ok on 7.4v, if not I'll use a Spektrum VR5203 to step it down to 6.0v for them.

Here's what I got:
Ailerons: Hitech HS-5565MH -Standard Size servo Metal gear 194oz/.09 sec
Flaps: Hitech HS-5685MH - Standard Size servo Metal gear 179oz/.17 sec
Rudder: Hitech HS-5087MH - Mini Servo Metal Gear 60oz/.13 sec
Nose Steering: Hitech HS-5087MH - Mini Servo Metal Gear 60oz/.13 sec
Elevator: JR DS390HV - Precision Mini Metal Gear 75oz/.13

Keeping my fingers crossed they all fit, but looks like they will and should be a good choice for this plane. I used the recommended torque ratings for the BVM Electra as my guide along with the info and pics MCSGUY has posted (Thank you!) and the info BillyD has told me.
Jan 28, 2013, 04:53 PM
Some Girls r Bigger thn Others
swps's Avatar
Quote:
Originally Posted by BILLYDSRC
I tested the retracts with 6.6v A123 pack and they worked great. But i don't know if they will work with a 2s Lipo?
Maybe a quick call to JTM could help answer that one.
Jan 29, 2013, 12:31 PM
Mile High EDF
420flyboy's Avatar
Found those retracts
http://www.smartmodel.com.hk/product...1&image=image2


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product JTM 90mm Viperjet by UsaRcJets BILLYDSRC Electric Ducted Fan Jet Talk 2118 Nov 10, 2017 05:23 PM
Build Log Jet Teng Models L-39 Thunderbird by UsaRcJets BILLYDSRC Electric Ducted Fan Jet Talk 75 Sep 18, 2011 07:58 PM
Discussion FoamEdge by Billy Haynes Billy Haynes Foamies (Scratchbuilt) 27 Apr 30, 2009 12:52 AM
D.O.G.S. Coverage from Billy Hell RC and RC Groups Jim T. Graham Fuel Power Events 33 Sep 13, 2005 08:31 PM