Thread Tools
Jan 23, 2013, 12:50 PM
aka JetMan Joe
MCSGUY's Avatar
Quote:
Originally Posted by cquian
I personally think it is cool
Thank goodness Carlos, I was beginning to think I was the only one
Sign up now
to remove ads between posts
Jan 23, 2013, 12:55 PM
Some Girls r Bigger thn Others
swps's Avatar
Glad I got my order in WITH the XXX!
Jan 23, 2013, 02:10 PM
Some Girls r Bigger thn Others
swps's Avatar
Quote:
Originally Posted by BILLYDSRC
That was just for the prototype's first flight.. I will have a new list of JR servos to use. Jim Hiller built it so I will get the info from him. Thanks Billy D
Billy, any update from Jim on what would be recommended servos?
Jan 23, 2013, 04:34 PM
Registered User
Paul Swy's Avatar
Billy, The red and orange look great. I like the xXx also - green - should have them change it to the light green like the large SM Viper. Dark green has never looked good on an airplane. I ordered blue and I'm hoping it's the same blue they used on the HPAT Viper - kind of a slight metallic. I guess I'm getting my order last since there haven't been any pics of those yet . Yes - servo's want to get those on order while I'm waiting - thanks for all the pics - keep em coming.
Jan 23, 2013, 04:45 PM
Registered User
Paul Swy's Avatar
Anyone know who "RC-Jets" is ? - logo on Orange and Green xXx pics.
Jan 23, 2013, 04:49 PM
Registered User
BILLYDSRC's Avatar
That is my buddy Cliff in Germany. He came up with the xXx paint scheme

Quote:
Originally Posted by Paul Swy
Anyone know who "RC-Jets" is ? - logo on Orange and Green xXx pics.
Jan 23, 2013, 04:52 PM
Registered User
BILLYDSRC's Avatar
Sorry not yet. Jim had to work 9 days in a row I will talk to him in the next day or so.
Quote:
Originally Posted by swps
Billy, any update from Jim on what would be recommended servos?
Jan 23, 2013, 04:59 PM
Registered User
Paul Swy's Avatar
I'm guessing some DS3421's would do well in the wings. Not sure about the stab/rudder, probably need some slim HS-225's. Just guessing guys - don't go buying these
Jan 23, 2013, 05:43 PM
Some Girls r Bigger thn Others
swps's Avatar
Quote:
Originally Posted by Paul Swy
I'm guessing some DS3421's would do well in the wings. Not sure about the stab/rudder, probably need some slim HS-225's. Just guessing guys - don't go buying these
I'm sure 3421's will do a great job, and is most certainly a safe bet; but I have no desire to put a $90 servo in when it's not needed.
Jan 23, 2013, 06:41 PM
Senior Member
Arngeir Blakseth's Avatar
I'll be using DS3421's for flaps, Futaba S3150 on ailerons and Graupner DS3288 on elevator and rudder, oh and a Hitec 5245 for nosewheel steering. I'm not all that big on brand loyalty Besides, I had some of these left over after cleaning out a crashed plane.
Jan 23, 2013, 06:54 PM
Registered User
Paul Swy's Avatar
I was just looking at the Electra recommended servo's - might be a good idea to go with a little more torque on the flaps ?
Jan 23, 2013, 07:09 PM
Senior Member
Arngeir Blakseth's Avatar
You don't think a DS3421 is strong enough? I don't really see a problem with using them, I've had good luck using them in other larger planes.
Jan 23, 2013, 07:26 PM
aka JetMan Joe
MCSGUY's Avatar
Quote:
Originally Posted by Arngeir Blakseth
You don't think a DS3421 is strong enough? I don't really see a problem with using them, I've had good luck using them in other larger planes.
I have to agree that I do not believe 75 oz/in (6v) is adequate for the flaps. Your DS3288 at 107 oz.in would be more suitable. If it were not for the form factor I would reverse the placement
Jan 23, 2013, 07:30 PM
Some Girls r Bigger thn Others
swps's Avatar
Here is what I've got in mind right now, I'm going to go high voltage and run everything off a 7.4v Lipo or a 6.6v Life battery and pair it with a JR1221 and my JR 11X. I'm assuming the JTM retracts can handle 7.4v.

Aileron and Flaps: Savox SG-0220MG $29.99 each, Hitech HS-5496MH $34.99 each or JR HS821 HV $29.99 each.
Elevator: Hitec HS-7245MH $69.99 each, JR DS398HV $74.99 each or JR DS390HV $74.99
Rudder: Depends on what will fit here. I'm guessing a JR DS398HV or Hitec HS-7245MH.
Nose Steering: Again depends on what will fit here. This could go either way, small with a HS-5087MH for $39.99 or Large with a Savox SG-0220MG for $29.99 or somewhere in between.
Jan 23, 2013, 07:40 PM
Senior Member
Arngeir Blakseth's Avatar
Quote:
Originally Posted by MCSGUY
I have to agree that I do not believe 75 oz/in (6v) is adequate for the flaps. Your DS3288 at 107 oz.in would be more suitable. If it were not for the form factor I would reverse the placement
No problem reversing the placement, I don't really see the shape of the DS3288's as a problem for use on flaps though, I have ordered some mounting frames for both of these servos from www.servorahmen.de so fitting them in the plane should be pretty easy.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product JTM 90mm Viperjet by UsaRcJets BILLYDSRC Electric Ducted Fan Jet Talk 2084 Jun 10, 2017 06:40 PM
Build Log Jet Teng Models L-39 Thunderbird by UsaRcJets BILLYDSRC Electric Ducted Fan Jet Talk 75 Sep 18, 2011 06:58 PM
Discussion FoamEdge by Billy Haynes Billy Haynes Foamies (Scratchbuilt) 27 Apr 29, 2009 11:52 PM
D.O.G.S. Coverage from Billy Hell RC and RC Groups Jim T. Graham Fuel Power Events 33 Sep 13, 2005 07:31 PM