Shop our Airplanes Products Drone Products Sales
Thread Tools
Oct 01, 2012, 10:24 AM
Hawk Fanatic
SkylineFlyer's Avatar
Quote:
Originally Posted by BrentP
Thanks for the PM Skyline......................all good mate.

Cheers

Brent
Thanks Brent, I appreciate the response.
Sign up now
to remove ads between posts
Oct 01, 2012, 10:36 AM
Foamie Freak!
Leather Helmet's Avatar

Beaver


Ordered my new Beaver from Tower last night. I will let you guys know how it goes. So far I love my Flyzone Select Scale Super Cub. I hope the Beaver works out just as good and flies as sweet!


Greg
Oct 01, 2012, 10:44 AM
Hawk Fanatic
SkylineFlyer's Avatar
Quote:
Originally Posted by Leather Helmet
Ordered my new Beaver from Tower last night. I will let you guys know how it goes. So far I love my Flyzone Select Scale Super Cub. I hope the Beaver works out just as good and flies as sweet!


Greg
Was that u that posted on my youtube video? If so, thanks for stopping in here to say hi!
Oct 01, 2012, 10:56 AM
"Aircraftus Fragmentum"
kydawg1's Avatar
Quote:
Originally Posted by SkylineFlyer
No, not at all. The mounts are all performing great. None of them have spun, pulled out or fell inside. I'm wondering if someone might have been pushing with excessive force with their screwdriver while not being lined up on the hole.
I was wondering that or if the screws might be slightly too large of a diam and if using a different one (smaller diam) might avoid the issue found.

By the way....Skyline - I told Tower to send you your profit sharing check.... I just ordered one after watching your video.

To all.... I will have a ANYLINK Adapter and RX for sale if someone wants/needs one. Just PM me.....
Oct 01, 2012, 11:32 AM
Closed Account
Quote:
Originally Posted by kydawg1
I was wondering that or if the screws might be slightly too large of a diam and if using a different one (smaller diam) might avoid the issue found.

By the way....Skyline - I told Tower to send you your profit sharing check.... I just ordered one after watching your video.

To all.... I will have a ANYLINK Adapter and RX for sale if someone wants/needs one. Just PM me.....
The problem is that some screw holes are not threaded and they are pretty tight for the provided self-tapping screws. This only happened with one of my mounting holes and I definitely wasn't pressing hard on the driver. I don't think it's anything that a little CA would't fix.
Oct 01, 2012, 11:33 AM
Hawk Fanatic
SkylineFlyer's Avatar
Quote:
Originally Posted by kydawg1
I was wondering that or if the screws might be slightly too large of a diam and if using a different one (smaller diam) might avoid the issue found.

By the way....Skyline - I told Tower to send you your profit sharing check.... I just ordered one after watching your video.

To all.... I will have a ANYLINK Adapter and RX for sale if someone wants/needs one. Just PM me.....
Lol, thats funny!
Oct 01, 2012, 12:36 PM
Hawk Fanatic
SkylineFlyer's Avatar
Quote:
Originally Posted by {}{steve}{}
The problem is that some screw holes are not threaded and they are pretty tight for the provided self-tapping screws. This only happened with one of my mounting holes and I definitely wasn't pressing hard on the driver. I don't think it's anything that a little CA would't fix.
There are many many different size screws, and unless someone is actually measuring the lengths of the screws so to ensure that they match up to the ones in the manual, it is possible to put a screw in the wrong hole that is too small for the screw. I even had screws left over.


Steve, what did you do with all that extra fishing line with the eye holes at the end of each one? The manual mentions nothing about them.
Oct 01, 2012, 12:57 PM
Just some guy
D Johnson's Avatar
Attach it to the float and do some trolling.

DJ
Oct 01, 2012, 01:22 PM
Closed Account
Quote:
Originally Posted by SkylineFlyer
There are many many different size screws, and unless someone is actually measuring the lengths of the screws so to ensure that they match up to the ones in the manual, it is possible to put a screw in the wrong hole that is too small for the screw. I even had screws left over.


Steve, what did you do with all that extra fishing line with the eye holes at the end of each one? The manual mentions nothing about them.
I assumed they were replacements for the float rudder lines that were already installed at the factory. They actually look to be better quality, too. (The eye holes look to be pre-bent and shorter than the factory installed ones). My hardware bags came labeled with which screws, and how many of each, were in each bag. This made identifying them pretty easy. The mounting hole that spun on me wasn't due to the length of the screw, but more the width of the threads. the screw went all the way in with some patience and working the screw back and forth.
Oct 01, 2012, 01:25 PM
Registered User
Is there any room in the cockpit for a pilot figure, or is it full of servo wires?
Oct 01, 2012, 01:37 PM
Closed Account
Quote:
Originally Posted by FlyingBeaver
Is there any room in the cockpit for a pilot figure, or is it full of servo wires?
There are actually 4 full seats in the cockpit area. If you have the skills, you can easily hide most, if not all, of the wiring under the seats.
Oct 01, 2012, 01:38 PM
Rhinebeck CD-99,00,01,02
Tom Smith's Avatar
My dad use to build row boats to sell to local shad fishermen. Pop taught me to keep a bar of soap handy and wipe the screw threads in the soap a little bit to get them to go in easier. These were slotted brass screws that stripped very easily. They went in easily with the soaped up threads but they never came out unless you took them out. Might be a good trick to try on these suspect screws. A little soap goes a long way too.
Oct 01, 2012, 01:52 PM
Hawk Fanatic
SkylineFlyer's Avatar
Quote:
Originally Posted by FlyingBeaver
Is there any room in the cockpit for a pilot figure, or is it full of servo wires?
Just like Steve said, if your good at tucking servo wires, you should be able to get some pilots in there. For me, I just wanted to get this up in the air, so I threw it together not giving much thought to wire placement. Once I get mine all sorted out (thanks to flyzone as they are sending me a new motor and cowl even though this was partially my fault) I might throw some pilots in there. I was looking at my other planes, I have pilots in all of them, I might as well put them in here too.
Oct 01, 2012, 01:54 PM
Hawk Fanatic
SkylineFlyer's Avatar
Quote:
Originally Posted by {}{steve}{}
I assumed they were replacements for the float rudder lines that were already installed at the factory. They actually look to be better quality, too. (The eye holes look to be pre-bent and shorter than the factory installed ones).
Mine didn't quite reach in that spot. They are a mystery to me.
Oct 01, 2012, 01:55 PM
Hawk Fanatic
SkylineFlyer's Avatar
Quote:
Originally Posted by Tom Smith
My dad use to build row boats to sell to local shad fishermen. Pop taught me to keep a bar of soap handy and wipe the screw threads in the soap a little bit to get them to go in easier. These were slotted brass screws that stripped very easily. They went in easily with the soaped up threads but they never came out unless you took them out. Might be a good trick to try on these suspect screws. A little soap goes a long way too.
Thats a great suggestion.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Dehavilland beaver DHC-2 Mk 3 peterpont Scale Kit/Scratch Built 16 Jun 09, 2016 07:24 PM
Discussion Dehavilland beaver DHC-2 Mk 3 peterpont Scale Fuel Planes 2 Jan 05, 2008 01:26 PM
Discussion Dehavilland beaver DHC-2 Mk 3 peterpont Giant Scale Airplanes 1 Dec 31, 2007 03:39 PM
Discussion Dehavilland beaver DHC-2 Mk 3 peterpont Parkflyers 3 Dec 29, 2007 07:32 PM
Discussion Dehavilland beaver DHC-2 Mk 3 peterpont Giant Electric Planes 1 Dec 29, 2007 06:39 AM