Thread Tools
Oct 12, 2012, 06:39 AM
Registered User
FlyinTiger's Avatar

Excellent!


These planes look like a ton of fun...I'm definintely going to have a couple. Beats most of the other micro stuff out there and the fuselages look 3D with the way the graphics are so detailed.

Fantastic work!
Sign up now
to remove ads between posts
Oct 12, 2012, 09:49 AM
Registered User
Just a quick FYI - I received mine in 8 days in Arizona. Packaging and kit look excellent.
Oct 13, 2012, 11:12 PM
Registered User
MinimumWage's Avatar
Hi Guys,

Got a lot of work done today. I'm ready to install the motor and motor mounting but I can't find the little screws. I didn't see them in the motor package or in the general hardware pack. Am I not looking in the right place?

I can probably find replacements at the hardware store if I can get the screw measurements.

Thanks in advance,

Mike Mc.
Last edited by MinimumWage; Oct 13, 2012 at 11:12 PM. Reason: clarity
Oct 14, 2012, 01:57 AM
Crashing with style
deadbird's Avatar
Hi Mike Mc,

This caught me out when I first received the motor & ESC components in their final form from the manufacturers. For some reason they decided to pack the screws in a pocket in the corner of the bag the ESC comes in. If you havent thrown it away yet you should find 3 of the little blighters tucked away there.

Jon
Oct 14, 2012, 05:02 AM
Registered User
Wregie's Avatar
Took me an age to find those screws, even with my glasses on.

While we are on the subject of mounting the motor and at the risk of appearing stupid. I am not sure what the instructions are trying to tell me about how to do the offset. I am sure it is obvious to everybody else but it hasn't hit me yet.
Oct 14, 2012, 05:37 AM
Crashing with style
deadbird's Avatar
Hi Wregie,

I will be getting the motor manufacturer to bag the screws seperately in the next order as they are not ideally located.

Basically by the time you reach the thrust angle adjustment stage in step 35 of the assembly manual, the assumption has been made that you have mounted the motor - shown in step 24 - by screwing the motor to the mount with the rubber washers between and all the screws tightened up all the way.

When it comes to step 35 'Thrust Angle Adjustment' all the screws are identified by number as you look at the motor from the front of the aircraft and the following steps show how much you need to loosen off the individual screws to induce the thrust angles required.

The subsequent diagrams in step 35 show in basic form what you're trying to acheive from top or side views in section. It is up to you to decide how much you adjust your thrust angle depending on the take off and flight characteristics of your aircraft. The rotational diagrams of the screws are merely to show you the changes you need to make relative to one another and not precise instructions.

I hope this has helped rather than confused even more. I'm cracking on with some more instructional videos next week so hopefully I'll be able to smooth out some of these sticking points.

Jon
Oct 15, 2012, 11:25 AM
Registered User
MinimumWage's Avatar
Jon,

Thanks - I checked the ESC bag and found the screws sealed in the corner. Back to work!

Mike
Oct 15, 2012, 02:19 PM
Crashing with style
deadbird's Avatar
Good stuff Mike!

Here's another 'how to' video that goes thru the first few steps of the fuselage build.

Its the P-51 but same rules apply to the Fw190

MICROACES - Building the fuselage Part 1 (8 min 23 sec)


Jon
Last edited by deadbird; Oct 15, 2012 at 02:39 PM.
Oct 15, 2012, 05:47 PM
Registered User
I'm excited to read about anyone's experiences post build and of course, how she flies Anyone have high res images of the detailed graphic work on the stickers?
The art work on these really make them stand out from other micros.
Oct 16, 2012, 03:16 AM
Crashing with style
deadbird's Avatar
Quote:
Originally Posted by boro92 View Post
I'm excited to read about anyone's experiences post build and of course, how she flies Anyone have high res images of the detailed graphic work on the stickers?
The art work on these really make them stand out from other micros.
Hi boro92,

I'll leave it to others to tell you of their building and flying experiences cos I'm biased but I thought I'd direct you to some references you might want to see.

There were loads of pics taken during the development of the Fw190 and close ups of some of the graphics - which I posted on this thread
Comments about the performance are few and far between at the moment tho as it's only been 4-5 weeks since product has been available and with the product taking 7-14 days to make it across the pond I'm guessing many are still mid build or clearing the bench, but some have let loose:

https://www.rcgroups.com/forums/show...&postcount=144
https://www.rcgroups.com/forums/show...&postcount=124

Cheers

Jon
Oct 16, 2012, 04:44 AM
AA6JB
Bajora's Avatar
Quote:
Originally Posted by boro92 View Post
I'm excited to read about anyone's experiences post build and of course, how she flies Anyone have high res images of the detailed graphic work on the stickers?
The art work on these really make them stand out from other micros.




Oct 17, 2012, 08:34 AM
Crashing with style
deadbird's Avatar
Part 2 & 3 of the fuselage build in glorious technicolor and HD!

Hope this stuff is helping some. Should be good for those who havent started their build or those wanting to know the details for future reference.

Jon

MICROACES - Building the fuselage Part 2 (3 min 29 sec)


MICROACES - Building the fuselage Part 3 (12 min 3 sec)
Oct 17, 2012, 12:03 PM
Registered User
Ah thanks for the good pics and links! Looks incredible!
Now to decide FW190 or P51...choices choices.

Anyone know the AUW of each?
Oct 17, 2012, 12:48 PM
Crashing with style
deadbird's Avatar
How about buy both! Works for me

The full spec sheets for both kits are available on the Microaces website, here's the links for both PDFs:

P-51D Spec Sheet

Fw190 A Spec Sheet

Gives you everything you need to know, hopefully.

But do fire away if you have more!

Jon
Oct 18, 2012, 02:41 PM
Crashing with style
deadbird's Avatar

More videos.....


Here are several more assembly instruction videos that have been uploaded recently on the Microaces Youtube channel.

You can always subscribe to MicroacesTV to keep up with new posted vids too!

Your support would be very welcome and much appreciated.

Jon

MICROACES - Building the tail (8 min 12 sec)


MICROACES - Building the wing Part 1 (3 min 57 sec)


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Wing Manufacturing P-38 Full kit $225obo Bismarck007 Aircraft - Fuel - Airplanes (FS/W) 6 Sep 26, 2012 12:41 PM
Sold Sig Manufacturing Four Star 60 Sealed NIB Kit $115.00 FREE SHIPPED!!! stevster Aircraft - Fuel - Airplanes (FS/W) 2 Jun 22, 2012 11:04 AM
Sold Sig Manufacturing Astro-Hog Kit Not 100% Complete $50.00 FREE SHIPPED!!! stevster Aircraft - Fuel - Airplanes (FS/W) 1 Apr 20, 2012 10:50 AM
Question Kit manufacturers and plans madbomber The Builders Workshop 9 Mar 07, 2012 10:07 AM
New CNC manufactured 1/2a autogyro kit PT Gyro Auto Gyros 14 Dec 29, 2004 12:38 AM