Originally Posted by cale10

6.2 OZ. the manual says 6 OZ

I am at 5.8 with the hacker.

decided to join the band wagon 74 edge

Nice!

I like Red Edges....

Just wanted something to play with at park

With yours there should be 4 at Walnut this season.

I'm all done and set up. Just need to order batteries this week. I think I'm going with Haiyin 5000's 40c's for the weight, I'd normally go with the Gens 5300 30c's.

Sweet i already got 7954 servos need motor and esc

I had a Ice100 on hand and I went with the Hacker A60-6XS V2.
F3A Unlimited has them with the cheapest shipping and mine went out the same day I ordered it.


http://www.f3aunlimited.com/webstore...roducts_id=651

Sweet 3dhs had my edge and wheel pants shipped same day anyone have motor and esc let me know

My Wicked Motor and Wemo will be in the mailbox today finally! 3 days to get here from Cleveland! Must have been on the Canal Boat to Roscoe Village!

Make sure you get the CG marked where you like it before you switch them out. The WeMo is a little different than the stocker and with the standoff the wicked will sit a little further aft.
Shouldn't be much of an issue though. The nice thing is now you have the components and if the Raptor gets too beat up you can just get airframe only kits and try a different model.

Originally Posted by kuczy

Make sure you get the CG marked where you like it before you switch them out. The WeMo is a little different than the stocker and with the standoff the wicked will sit a little further aft.
Shouldn't be much of an issue though. The nice thing is now you have the components and if the Raptor gets too beat up you can just get airframe only kits and try a different model.

Good! That will make it work out better! Batt is way back, harder to get in and out. Got room to bring it forward and I was trying to get a little more to the tail on balance. Maybe I can fly those 1800's after all, like Don says to use with this setup.

Received my 58" in good order today as aways from 3DHS.Ill be moving the power system from my EF 60" Edge into the 58.

Warren ,I used the outside box to ship your Twisted Edge ,worked out well, you should have at you door tomorrow

Get her done Ron. They said the 92 edge will be maybe in the fall

Originally Posted by bullittjeff

Get her done Ron. They said the 92 edge will be maybe in the fall

Ya, I seen that,O,well I was thinking we be lucky to get it this year.