want to build a 24 inch plane - Page 7 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Oct 23, 2012, 01:23 PM
Registered User
yes jack its d same Eneloop,can i cover the motor like make a box over it with depron to avoid dust setting inside the motor
Last edited by romanxdsouza; Oct 23, 2012 at 11:53 PM.
Sign up now
to remove ads between posts
Oct 30, 2012, 10:44 AM
Registered User
did a madien dont know to put video
Oct 30, 2012, 04:44 PM
jackerbes's Avatar
You can go to YouTube and open an account and then upload the video.

Then post a link to the video here.

Here one of the ones I have uploaded as an example:

KFoenix Stick w/KFm2 Polyhedral Wing #2 (2 min 52 sec)

Nov 03, 2012, 12:03 AM
Registered User
hi jack ,had 2 crashes mud went in the motor now its fine this is the 3rd video i was scared found the ground small ,kept thiking it will hit a wall or tree hav a look at the ground is it k was scared it will drift away there was a bit of wind,i made another plane a bit heavy found some ideas on d site,this new plane i built to save the motor n learn to fly the pics below still figuring out how to put video of the first rc plane.

this is the link for my first rc plane
IMG 1213 (0 min 21 sec)
Nov 03, 2012, 12:09 AM
Registered User
thanks 2 u jack 4 all ur help lets c this new bird now ,this new plane i built to save the motor n learn to fly the pics below , i find it heavy but lets try,found some ideas on d site 2 save motor n learn to fly
Nov 03, 2012, 08:12 AM
jackerbes's Avatar
Congratulations! You are now (now, not "not" as I said originally) an official airplane builder!

In the video it looked like the plane was circliing left by itself, if you were not giving it left rudder, then adjust your rudder until if is a little to the right to compensate.

Take it slow and easy and you'll have it all figured out soon!

Last edited by jackerbes; Nov 04, 2012 at 07:36 AM.
Nov 03, 2012, 08:58 AM
Wake up, feel pulse, be happy!
Piece's Avatar
Congratulations! You are not an official airplane builder!
I can't help chuckling each time I read this.... Are ya SURE this is what you meant to say, Jack?
Nov 03, 2012, 04:39 PM
jackerbes's Avatar
Sure, the more you build the better you will get and you will be older and smarter. But you built, I saw it fly, and you are one!

Nov 04, 2012, 02:05 AM
Registered User
jack i guess he means the "not" in the sentence .below .....
""Congratulations! You are not an official airplane builder!"". n way i undstd wat u mean thanks a ton again ,waiting for a good day to do madien wth the other plane now
Last edited by romanxdsouza; Nov 04, 2012 at 02:21 AM.
Nov 04, 2012, 07:38 AM
jackerbes's Avatar
You guys are right! I made fat fingered typing error and did not notice it! I have corrected that now!

Sorry if you read any insult into my post Roman, it was an accident!

Nov 05, 2012, 12:08 AM
Registered User
thats absolutey fine jack,will post video of nxt flight once i do the madien waiting for a good day
Nov 07, 2012, 11:26 PM
Registered User
jack,want to do a madien there seems to always b wing will the planes handle it if i still fly
Nov 08, 2012, 05:05 AM
Registered User
jack need ur help want guys in india to knw about this were can i post it ...... http://www.rcelectronicworld.co.cc/p...l-sources.html this guy dhiraj rajendra jadhao is a cheat,i ordered for 5 sheets of depron was charged 1400rs,from pune - mumbai recieved it in pieces ,check .pics below on delivery day along with the guy who delivered it,he said he will send new sheets its been 2 months now i have not recieved it,he doesnt answer his phone even,guys from mumbai here a good place to buy heres the adress...abdullatif habibbhoy 196 abdul rehman street,400 003 tel 23425314..........per sheet 60rs thats 6mm sheet around 72inch x 26inch you can call and ask exact size
Nov 08, 2012, 12:44 PM
jackerbes's Avatar
There is really no forum here just for posting warnings or criticisms of merchants you may deal with.

But there is a regonal forum for India here:


If you look through that forum maybe you can find a place to post your impressions of the dealer. Or maybe you can start a thread where you can do that. But be careful that you don't violate the forum guidlines for posts. The forum rules are here and violating them can get you a warning from a moderator:


You should edit your profile to show where you live, other people will be able to see what part of the World you are from. To add you location to so it can be seen on your posts, click on your user name up in the upper right corner so you can see your Control Panel. Then click on the Set Location link to enter the info.

Nov 13, 2012, 02:58 AM
Registered User
i did put it up in that indian forums
, the second plane crashed hahaha was realy funny dint get a video thou the landing gear was weak n broke, the landing gear was too weak ,working on another landing gear now. thank u

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Wanted cowl for Great Planes SU-31, the 77 inch WS. Part # GPMA3073 PropsnWings Aircraft - Fuel - Airplanes (FS/W) 5 Aug 03, 2012 11:07 AM
Discussion 24 inch laser scratch build Hobiestoke Sailboats 50 Jan 28, 2012 04:12 AM
Build Log 24 hour build log. 10 inch biplane. nemoskull Scratchbuilt Indoor and Micro Models 9 Jan 23, 2012 11:19 AM
Discussion The build of my 24 inch delta Started in 05 updated 2010 epoweredrc Foamies (Scratchbuilt) 15 Jan 31, 2010 11:51 PM
New 24 inch wing with GWS 300 Motor (scratch build) Qrome Flying Wings 15 Sep 24, 2005 05:23 PM