For sale here is my lovely 4M Ava-E Pro, also known as the Hyper Ava or the Ava Longhorn here stateside. This really is a majestic plane that I purchased last July, and the size is something that never gets old. It will come RTF, minus a little TLC work that is needed. For power it has a HiMaxx HB3630-1500 geared inrunner swinging an 18x9 Aeronaut prop, a BB turbo spinner, and a Castle Ice-Lite 75A ESC. I'm also including the 2 batteries for it, Rhino Lipo 4S 40C 2250 packs that are less than a year old and low usage. With those packs and the powertrain, the climb rate is 2400 fpm, getting to ALES altitude takes about 12 seconds
Also included in there is a CAM unit. It has a Futaba R617FS rx that can be included if needed. All servos are Hyperion DS09 AMD metal geared. And to top it off I'll also include the 70" plane quiver bag that I kept it in. Now for the bad news, I had a mid-air with it at an ALES contest back in March, and have since not flown it. The damage is minimal and easily fixable, I've just not taken the time to do the repairs. A section of the Dbox on the center panel about 2" wide was where the wing took the hit, the Dbox absorbed it all and didnt transfer any more damage onto the center panel, there is some very slight wrinkling in the covering behind it. On the right outer wing panel, there is some damage to the covering and along the TE for 3 ribs that is very minor, the camera almost couldnt even see it. The hatch was lost in the mid air and never recovered. There is also a small cosmetic repair on the Dbox under the Prism tape that occured in a hangar rash incident back during the winter. This entire set up new would cost you $1850, not including shipping. I would like to get $1300 for this, $1350 if you want the rx included. Of course, due to the large size, I would prefer to not ship this, and am willing to drive a good distance to hand her off to someone. I will ship it though if need be, and I will get you a quote via FedEx. If you have any questions or offers, please PM me. Thanks!