Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Dec 03, 2012, 02:27 AM
trumps is offline
Find More Posts by trumps
What's 3D?
trumps's Avatar
she is coming up very nicely mate, must look like a light blue dust storm has been blowing out the front of your place! are you dry sanding it or wet?

Cheers
Craig
Sign up now
to remove ads between posts
Old Dec 03, 2012, 02:48 AM
Pat Lynch is online now
Find More Posts by Pat Lynch
a.k.a Maltone
Pat Lynch's Avatar
Gree - I got mine from Autocheap - 2 cans for $20.

Craig - I'm dry sanding. I have a fear of moisture getting into the balsa and swelling it (it did earlier, so now - dry )
The weather is great for doping and sanding - mid 20s and a light breeze to keep the fumes away.

Pat
Old Dec 03, 2012, 03:23 AM
bmutlugil is online now
Find More Posts by bmutlugil
Registered User
bmutlugil's Avatar
Looking good, as usual..

About the application of tissue on curved surfaces, I always apply the tissue wet and dope while it is wet (lacquer used here, no dope), works like a charm for me. On the Fairchild, I applied silk over tissue the same way - both layers were applied wet, but of course not at the same time I do the same over curved solid surfaces.

I wish I was there; here winter is setting in and oudoor activites are getting difficult.

Bulent
Old Dec 03, 2012, 03:38 AM
Gree is offline
Find More Posts by Gree
Registered User
Gree's Avatar
Quote:
Originally Posted by maltone View Post
Gree - I got mine from Autocheap - 2 cans for $20
Yup that's the one! I'm really looking forward to seeing colour go down on this one...
Old Dec 03, 2012, 03:56 AM
Pat Lynch is online now
Find More Posts by Pat Lynch
a.k.a Maltone
Pat Lynch's Avatar
Quote:
Originally Posted by Gree View Post
Yup that's the one! I'm really looking forward to seeing colour go down on this one...
Memory a bit crook - Supercheap Auto it was really - I guess you interpreted

Pat
Old Dec 03, 2012, 04:59 AM
Gree is offline
Find More Posts by Gree
Registered User
Gree's Avatar
Yeah I knew what you meant...
Old Dec 03, 2012, 03:20 PM
Smokin' Beaver is offline
Find More Posts by Smokin' Beaver
Registerd Beaver
Smokin' Beaver's Avatar
Thanks for posting more pics Pat.
It's looking awesome.


Phil

edit: Just bought a copy of the Radio Modeller mag off E-bay for $8 so this one is now officially on the "to do" list
Last edited by Smokin' Beaver; Dec 03, 2012 at 03:31 PM.
Old Dec 03, 2012, 05:06 PM
wizard of odd is online now
Find More Posts by wizard of odd
Registered User
wizard of odd's Avatar
Pat/Gree

Would you mind posting the brand name of the primer please? I'm trying to find one that's not grey or brown- which were the only colours available at my local automotive paint store. We do have a Supercheap Auto close by though.

Thanks

Odd

PS: Here's Planeman's take on tissue and dope covering: https://www.rcgroups.com/forums/show....php?t=1782262
Last edited by wizard of odd; Dec 03, 2012 at 05:29 PM. Reason: Added tissue and dope link
Old Dec 03, 2012, 06:39 PM
Pat Lynch is online now
Find More Posts by Pat Lynch
a.k.a Maltone
Pat Lynch's Avatar
SEPTONE Acrylic Spray Putty - I got mine from Supercheap Auto.
the stuff is made in Qld. I guess it is available in various colours - I oly had a choice of blue!

Pat
Old Dec 03, 2012, 07:56 PM
trumps is offline
Find More Posts by trumps
What's 3D?
trumps's Avatar
The generic Auto1 brand is the same blue colour as well Odd.

Craig
Old Dec 03, 2012, 09:32 PM
wizard of odd is online now
Find More Posts by wizard of odd
Registered User
wizard of odd's Avatar
Pat and Craig: Thanks fellas- I'll go check it out!

My stuff is a brand called "Motospray", which is a brilliant high-build primer putty, but the grey or brown takes a lot more white to cover it when doing the top coat.

Odd
Old Dec 03, 2012, 10:38 PM
Pat Lynch is online now
Find More Posts by Pat Lynch
a.k.a Maltone
Pat Lynch's Avatar

First Paint......


Not that you'd notice!
I sprayed the undersides with a pale blue/grey mix of Tamiya white and a drop of blue and green. The green was added because the white/blue was a bit too mauve. (green is opposite red on the colour wheel). I cant decide whether the underside/topside boundry is a soft or sharp edge. Research needed.

The upper cabin windows were cut using a brass template to get them all the same. I can hopefully cut the clear sheet windows with the same template. The forward windows weren't always glazed. Somtime blanked off, or with a small porthole left in them. The rear ones sometimes had guns poking out.

The scheme I've chosen had round portholes in the front pair IIRC.

The third picture is of an interloper I convinced to go back to the garden! He/she eats spilt dog food pellets.

Pat
Old Dec 03, 2012, 11:37 PM
trumps is offline
Find More Posts by trumps
What's 3D?
trumps's Avatar
that nose frame work really has come up a treat mate, you outa give the bluetongue some strawberrys, the ones over here love em, actually they seem to love most soft fruits and look funny as hell trying to scare you offwith a gob full of fruit the big bungarras are out and about up at work, tipping over rubbsh bins and spreading the contents far and wide, they are great!

Craig
Old Dec 04, 2012, 04:21 AM
Smokin' Beaver is offline
Find More Posts by Smokin' Beaver
Registerd Beaver
Smokin' Beaver's Avatar
For anyone interested in obtaining plans for this model, I found them here!

http://www.myhobbystore.co.uk/produc...heinkel-he-111

Sorry for hijacking your thread Pat but to have all the key info in one great thread it's worth gatecrashing

Cheers - Phil
Old Dec 04, 2012, 04:42 AM
Pat Lynch is online now
Find More Posts by Pat Lynch
a.k.a Maltone
Pat Lynch's Avatar
Thanks Phil - all contributions gratefully recieved! I had looked at that site a couple of months ago and there was nothing in the Forum. Now there is a link to this thread Such is fame!
I assume you got my PM?
Cheers - Pat


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Here we go again California Condor Life, The Universe, and Politics 37 Aug 14, 2012 10:41 AM
Help! Here we go again! 2 cell UMX newby questions.Miniaviation parallel charger board richos Batteries and Chargers 27 Aug 13, 2012 05:48 PM
Sold Here we go again Sundowner 50 RTF just add radio and lipos..$285 plus shipping planebldr Aircraft - Electric - Airplanes (FS/W) 0 May 30, 2012 03:06 AM
Help! Here we go again--What set of programs for CNC? Mel Duval CAD/CAM 10 May 29, 2012 09:26 AM
Discussion Here we go again grunts leave Iraq go to Jordon to attack Syria treehog Life, The Universe, and Politics 10 Dec 14, 2011 04:15 PM