Thread Tools
Oct 08, 2012, 05:40 PM
QuAd FaNaTiC
Razors edge 29's Avatar
damn I want that BL set up
Sign up now
to remove ads between posts
Oct 08, 2012, 05:45 PM
2 seconds from crashing
indoorheli's Avatar
Quote:
Originally Posted by Razors edge 29
damn I want that BL set up
make one it is super easy!
Oct 08, 2012, 06:02 PM
QuAd FaNaTiC
Razors edge 29's Avatar
where is good place to buy the motor, esc and pinion

I guess I need the ESC flashed correct?

Dylan or topper sells flashed ESC;s or you have to buy one, then send to them?

Quote:
Originally Posted by indoorheli
make one it is super easy!
Oct 08, 2012, 06:11 PM
2 seconds from crashing
indoorheli's Avatar
You can get all the parts in 1 stop from Dylan or topcopter. Yes you do need to get an esc flashed but both of them can do that for you for 5 dollars if they have 1 in stock. You could also buy a USB flash stick from either one and Flash the esc yourself
Oct 08, 2012, 06:45 PM
QuAd FaNaTiC
Razors edge 29's Avatar
okay thanks

I'll contact them

what about motor mount? You made your own fab?

Quote:
Originally Posted by indoorheli
You can get all the parts in 1 stop from Dylan or topcopter. Yes you do need to get an esc flashed but both of them can do that for you for 5 dollars if they have 1 in stock. You could also buy a USB flash stick from either one and Flash the esc yourself
Oct 08, 2012, 07:06 PM
2 seconds from crashing
indoorheli's Avatar
Yeah I did out of washers. The hawk 12000kv tail motor looks like an almost drop in motor.
Oct 08, 2012, 07:42 PM
Registered User
JLink125's Avatar
Quote:
Originally Posted by indoorheli
Yeah I did out of washers. The hawk 12000kv tail motor looks like an almost drop in motor.
Any pics of the mount?
Oct 08, 2012, 07:45 PM
Registered User
Willyboy's Avatar
See post #217 http://www.helifreak.com/showthread....455791&page=22
Oct 08, 2012, 08:17 PM
Registered User
Thanks will try that setup
Oct 08, 2012, 09:18 PM
Registered User
Quote:
Originally Posted by Willyboy
Check out this low speed BL by Dylan using a 150 mAh battery. Oh Yeah!
http://www.helifreak.com/showthread....455791&page=22

Bob


Another vid...this looks to be the high power setup

Darrin Reed flying a brushless Nano CPX (2 min 15 sec)


Amp
Last edited by Ampdraw; Oct 08, 2012 at 09:51 PM.
Oct 08, 2012, 09:21 PM
Team WarpSquad
Daryoon's Avatar
Indoor: Any better pics or tips on how you did your brushless mount? Also, what motor did you end up using?

I saw that HobbyKing has a similar motor to that's Hawk 12000kv. It's out of stock at the moment though.
Oct 08, 2012, 10:02 PM
Registered User
nebwake's Avatar
Just picked one of these little buggers up, flew the 2 stock packs and really enjoyed it, it held the tail MUCH better than my old mcpx.
Oct 08, 2012, 10:49 PM
2 seconds from crashing
indoorheli's Avatar
Quote:
Originally Posted by JLink125
Any pics of the mount?
post 6
https://www.rcgroups.com/forums/show...6#post22950579

Quote:
Originally Posted by Ampdraw
Another vid...this looks to be the high power setup

http://www.youtube.com/watch?v=In-kewt3lSk

Amp
Did he mention what more he went with for the high power? hp03s 16600kv?

To me It really looks like the hp03s on 8 tooth but I could be wrong. When I tried the 8 tooth it looked pretty close to that power but it was only me always behind the sticks so I couldn't see what it really could do

Quote:
Originally Posted by Daryoon
Indoor: Any better pics or tips on how you did your brushless mount? Also, what motor did you end up using?

I saw that HobbyKing has a similar motor to that's Hawk 12000kv. It's out of stock at the moment though.
I added more pics to that other thread. If you wait a bit i think Ampdraw will probably be testing that motor soon HK doesnt show the back but it has the 7mm mount which is 1mm shy of being a perfect drop in fit.
Oct 08, 2012, 11:34 PM
Registered User
Quote:
Originally Posted by indoorheli
post 6
https://www.rcgroups.com/forums/show...6#post22950579


Did he mention what more he went with for the high power? hp03s 16600kv?

To me It really looks like the hp03s on 8 tooth but I could be wrong. When I tried the 8 tooth it looked pretty close to that power but it was only me always behind the sticks so I couldn't see what it really could do


I added more pics to that other thread. If you wait a bit i think Ampdraw will probably be testing that motor soon HK doesnt show the back but it has the 7mm mount which is 1mm shy of being a perfect drop in fit.
Pretty sure it's the 13500 on 8t with a larger pack (probably a 180 or 240 hyp) and a longer boom.

Amp
Oct 09, 2012, 12:28 AM
2 seconds from crashing
indoorheli's Avatar
Quote:
Originally Posted by Ampdraw
Pretty sure it's the 13500 on 8t with a larger pack (probably a 180 or 240 hyp) and a longer boom.

Amp
Oh I thought he was going to go with something crazy for the HP and not just the pinion change. It is nice to see what the heli can do in the proper hands.

I really liked the 8T just it didnt like my batteries. Though even the 7T is picky on batteries in the 150 size. Here is a horrible video but it is the only time I filmed the brushless 7t. At first I flew with a battery that had around 30 flights and then went to a new one. Crappy vid or not it still shows how snappy it is with a 7T

I think I am going to jump back on the 8 tooth bandwagon and just deal with the weight of a better battery.

nano cpx brushless (0 min 0 sec)


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Cool Walkera MiNi CP - Smallest 100 sized 3D helicopter zadaw Micro Helis 6166 Nov 19, 2016 11:57 PM
Discussion is there anything better than mcpx v2 at same or smaller size? Legendary_Agent 3D Electric Heli Flying 33 Feb 24, 2012 08:46 PM
Question Whatís Better than a Blade CP and Smaller than a Trex? HavingFun2002 Micro Helis 74 Mar 05, 2006 05:07 PM