Blade nano CPX - even smaller than the mCPX! - Page 78 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Oct 06, 2012, 03:02 PM
Rocket Programmer
jasmine2501's Avatar
Quote:
Originally Posted by Jake8131
Went to the LHS and got this...want to be different, besides, I like blue better than yellow. (different canopy and tail fin.)


Yeah that looks nice, I don't like the yellow too much, it's kind of pale.
Sign up now
to remove ads between posts
Oct 06, 2012, 03:14 PM
Gone Huckin'
turnerm's Avatar
Quote:
Originally Posted by quadracer111
Yup, mine does it. I can usually only do a full 360 at full rudder before it shoots off in a random direction or goes for a nose dive.
Glad I'm not the only one! Not a huge deal... just a little quirk to be aware of I guess.
Oct 06, 2012, 03:18 PM
Inspired by the wings of an An
Andycap's Avatar
Great little toy but once again the undercarriage absolutley sucks and there are none available if you try and get the BLH3304. I'm certain others from eflite will fit though, but they are equally pooh! Better get the brain out and the CNC router into action I think
Oct 06, 2012, 03:30 PM
Registered User
Willyboy's Avatar
Quote:
Originally Posted by Andycap
Great little toy but once again the undercarriage absolutley sucks and there are none available if you try and get the BLH3304. I'm certain others from eflite will fit though, but they are equally pooh! Better get the brain out and the CNC router into action I think
You must mean BLH3204? If so, they don't fit...too big and have too force it into the frame and it rubs the main board without being able to push the gear all the way up. I am returning two sets sent to me saying that it would work.

Bob
Oct 06, 2012, 03:39 PM
Inspired by the wings of an An
Andycap's Avatar
BLH3204 is for the MSR X
BLH3304 is the part number from the Nano CPX manual is you look on the blade heli site the undercarriage is listed as the old EFLH3004 part number from the MSR

http://www.bladehelis.com/Products/D...rodID=EFLH3004

Andy
Oct 06, 2012, 03:45 PM
It flies!!! ... so who cares ?
erdnuckel2's Avatar
Quote:
Originally Posted by Andycap
BLH3204 is for the MSR X
BLH3304 is the part number from the Nano CPX manual is you look on the blade heli site the undercarriage is listed as the old EFLH3004 part number from the MSR

http://www.bladehelis.com/Products/D...rodID=EFLH3004

Andy
this has all already been done man!

flowmotion (is a user here) sells a skidset in g10 fiberglass, which weights about 1.3g.
Also, there are the Airtime skids (which were the best I ever bought for the mCPX, so if the nCPX ones are anything like it, they will be great!)

BTW, both of this has already been mentioned here in the thread ...
Latest blog entry: Random Pictures ...
Oct 06, 2012, 04:33 PM
Registered User
Quote:
Originally Posted by asosestrom
I just noticed this morning that the nano has zero pitch marks like the 130X
Nice to know, thanks!
Oct 06, 2012, 08:06 PM
Registered User
Quote:
Originally Posted by Jake8131
Went to the LHS and got this...want to be different, besides, I like blue better than yellow. (different canopy and tail fin.)


I bought a blue canopy and another nano to put it on. I like the yellow but, wish it was a brighter yellow.
Oct 06, 2012, 11:03 PM
Go small or go home
ruzam's Avatar
Just got my nano today (yeah!) Put through 4 batteries. Very nice

Did anyone else notice the rear servo is different than the front two? Not just the longer servo leads, but the motor can has a slightly different shape at the pinion, like they used a different servo motor.
Oct 07, 2012, 12:05 PM
Registered User
cfossa's Avatar
Quote:
Originally Posted by malder
Can't find anything on setup of ncpx for T9cap with DM8.

I have it flying ok but manual was not helpful on how to get into stunt mode for computer radio setup.

Fuataba manual isn't much help either so if anyone can post the setting that would be great. Not sure how to setup normal stunt mode I have ch5 setup on switch but no joy.

Thanks
Hi,

I don't have the Nano CPx, but I'm using the Futaba T9CAP and Spektrum DM8 module for the Blade mCPx.

You set up the Normal and Stunt modes with the throttle and pitch curves. I'm using the following, and have it set up on switch G:
Throttle Normal - 0% 40% 60% 80% 100%
Throttle Idle Up 1 - 100%, 90%, 80.5%, 90%, 100%

Pitch Normal - 30% 40% 50% 75% 100%
Pitch Idle 1 - 0% 25% 50% 75% 100%

I used swash plate type SWH1
I also reduced the End point for pitch (CH6) to 60% which seemed to help with the tail blow outs.

PM if you have any questions.

Carl
Oct 07, 2012, 12:22 PM
Big FPV Balls
noobiznessflying's Avatar
so it's been more than a week since I've sent my defective nano back to hh. still do not have my replacement.

sigh.

... i must've angered the heli gods.
Oct 07, 2012, 12:54 PM
2 seconds from crashing
indoorheli's Avatar
I takes them a few days once they get it to fix or replace then send out. So plan on up to 3 weeks total back to you in Cali. This is one reason why I always buy at least two of each heli just in case I ever have an issue large enough to send it back....and makes troubleshooting very easy.
Oct 07, 2012, 02:53 PM
QuAd FaNaTiC
Razors edge 29's Avatar
So anyone else try the mqx motor mod yet? Im interested in how much extra thrust it makes
Oct 07, 2012, 04:49 PM
Registered User
Quote:
Originally Posted by Jake8131
Went to the LHS and got this...want to be different, besides, I like blue better than yellow. (different canopy and tail fin.)


He said that he just sold a blue canopy; didn't think it was to you! No question that it looks a lot nicer in blue. Wonder if they had that in mind when they decided to release it in yellow...

I'm almost to the point where I would let someone else see my attempts to pilot this thing, but it sure is a whole lot of fun in the meanwhile.
Oct 07, 2012, 05:02 PM
Team WarpSquad
Daryoon's Avatar
Quote:
Originally Posted by Razors edge 29
So anyone else try the mqx motor mod yet? Im interested in how much extra thrust it makes
Any more info regarding this? Like if you saw it done elsewhere?

Thanks.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Cool Walkera MiNi CP - Smallest 100 sized 3D helicopter zadaw Micro Helis 6166 Nov 20, 2016 12:57 AM
Discussion is there anything better than mcpx v2 at same or smaller size? Legendary_Agent 3D Electric Heli Flying 33 Feb 24, 2012 09:46 PM
Question Whatís Better than a Blade CP and Smaller than a Trex? HavingFun2002 Micro Helis 74 Mar 05, 2006 06:07 PM