Really dumb question - RC Groups
Thread Tools
Aug 25, 2012, 11:44 AM
Registered User

Really dumb question


Probably the most stupid question ever but i really need help.
How do you attach the ball links to the servo arms (in a copterx 450)?
I tryed drilling a hole and then use a nut to hold it in place but there is not enough to the nut hold tight.
I tryed screwing the ball link directly but it doesnt break throw the plastic of the servo arm...
How do i do it?????
Sign up now
to remove ads between posts
Aug 25, 2012, 12:15 PM
Crash and learn
Find a photo for one with plastic swashplate arms

Last edited by Ribble; Aug 25, 2012 at 12:30 PM.
Aug 25, 2012, 01:01 PM
Rocket Programmer
jasmine2501's Avatar
You should be able to get a nut on the other side. If not, then maybe you mixed up the balls in your kit. Some of them have long bolts and some have short - the short ones go into metal parts with some Loctite.
Aug 25, 2012, 01:54 PM
Registered User
thnks for your reply.
Actually i think this servo arms (from hxt900) are thick... I have other servo arms (from esky 8g) that are thinner and one those i can put a nut...
I guess i will purchase longer ball links.
Aug 26, 2012, 05:48 AM
Registered User
Ok, i got new ball links with longer screws and i can now use a nut to hold it.
One more thing, in the first picture i cant see any nut so i guess somehow i should be able to screw the ball link directly to the servo arm....

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Dumb pusher prop question kc2pxp Electric Plane Talk 48 Aug 01, 2012 04:50 PM
Discussion A really dumb question about foam golf_lake Foamies (Scratchbuilt) 2 May 30, 2012 09:03 PM
Discussion Really dumb question TXTATE 3D Flying 7 Mar 14, 2007 06:05 PM
Discussion A really dumb question Starwatcher Fuel Plane Talk 2 Dec 28, 2006 01:53 PM
Really dumb question youngster Beginner Training Area (Aircraft-Electric) 11 Sep 20, 2004 07:40 PM