New Products Flash Sale
Thread Tools
Old Nov 23, 2003, 04:00 PM
mrebman is offline
Find More Posts by mrebman
Registered User

Do I need to fly Both Ailerons & Rudder to do 3D?


I would like to get into flying 3D but my left hand is nowhere near as coordinated as my right hand. Does 3D flying involve both Rudder & Aileron? Can you fly 3D with just Aileron/Elevator or Rudder/Elevator?

-Thanks-

Mike
Sign up now
to remove ads between posts
Old Nov 23, 2003, 04:33 PM
fwilly is offline
Find More Posts by fwilly
Pro Bro #495
fwilly's Avatar
Yes. Don't worry about it. It becomes second nature after a while. I'm always trying to use the left stick, even when I'm flying a 3 channel plane.
Old Nov 23, 2003, 04:49 PM
Jeffery is offline
Find More Posts by Jeffery
And You're Not
That's the great thing about flying 3D...you will finally get to use all the sticks all the time!

I admit I was very weak in rudder skills when I started learning 3D...now I'm a lot better (still LOTS of room for improvement!!!!!!) but it gives me a sense of being a much more complete RC pilot.

It's a journey, not a destination.
Old Nov 23, 2003, 07:38 PM
Andy W is offline
Find More Posts by Andy W
Registered User
Andy W's Avatar
Quote:
Originally posted by fwilly
It becomes second nature after a while.
What they don't say, is how long "a while" is..

Quote:
Originally posted by Jeffery
I admit I was very weak in rudder skills when I started learning 3D...now I'm a lot better (still LOTS of room for improvement!!!!!!)
Exactly. I built the 3DX because although my Super Diablotin is quite capable, the nut behind the gimbles isn't.. I only have about 10 flight on mine (although at >15 minutes, usually 20+ per flight, that's a LOT more stick time than any other model), I am actually getting close to being able to hover.

I'm not doing this to be able to hover, however, I'm doing it to become a much better all around pilot. Learning to correct the model in a hover is helping in other areas which need tons of improvement..
..a
Old Nov 23, 2003, 07:52 PM
fwilly is offline
Find More Posts by fwilly
Pro Bro #495
fwilly's Avatar
It helps to have a durable plane with really bad adverse yaw. That helped me learn upright rudder real fast. Right now, I'm working on getting the rudder right when in an inverted harrier.
Old Nov 23, 2003, 09:18 PM
Shortman is offline
Find More Posts by Shortman
1,1,2,3,5,8,13,21,34
Shortman's Avatar
Ailerons, Elevator, Rudder, Throttle are all things you use when you fly 3D.

For hovering ailerons isn't a big deal, and for many, thats all 3D is.

For everything else, ailerons can play a big part in flying.

Steven
Old Nov 24, 2003, 08:28 AM
Andy W is offline
Find More Posts by Andy W
Registered User
Andy W's Avatar
I disagree on ailerons not being a big deal for hovering. My 3DX has the 'smaller' ailerons, and it is tough to hold it (prevent torque roll) without massive aileron movement. I am thinking of extending the ailerons to the 'update' size to help here..
..a
Old Nov 24, 2003, 08:33 AM
fwilly is offline
Find More Posts by fwilly
Pro Bro #495
fwilly's Avatar
The larger ailerons help. You can also tilt it a little off vertical to help prevent the roll.
Old Nov 24, 2003, 09:20 AM
houfek is offline
Find More Posts by houfek
PittsLover
houfek's Avatar
Jeffery.....

"It's a journey, not a destination."

Man, if only everyone would adopt that motto......our hobby.....and our lives......would be much better off.

You said a mouthfull with that statement !!


Jim
Old Nov 24, 2003, 09:23 PM
Shortman is offline
Find More Posts by Shortman
1,1,2,3,5,8,13,21,34
Shortman's Avatar
Hovering is quite simple once you learn the basics. I realized as many do that over correcting always messes me up. Just focusing on the canopy and using a little elevator with slight rudder and you can keep it there for days hehehe.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question How much thrust do I need to fly? Crash_Clark Power Systems 2 Sep 25, 2006 01:59 PM
Do I need more than just rudder/elevator? konaboy Electric Sailplanes 17 Aug 29, 2005 07:32 AM
Do I need ailerons on both wings? Psyko-lefse 3D Flying 11 Jan 15, 2005 01:50 AM
Ailerons, do I need em? ecrouse Electric Sailplanes 24 Nov 12, 2003 06:02 PM
What all do I need to build and fly an FMA Razor? Steve Fehr Foamies (Kits) 26 Oct 13, 2001 03:19 PM