Thread Tools
Sep 27, 2012, 06:56 AM
Vulcan skyhook multirotor
Andre6553's Avatar
one off these days i will have a similar frame for $250 have someone that design it for me but it wound be for sale just for my own personal use.
Sign up now
to remove ads between posts
Sep 27, 2012, 08:48 AM
Registered User
Hi Andre....the whole system is quite reasonably priced at $1999. And you know it works. Do the numbers and you will see that the Frame and the Gimbal are actually quite well priced.
Sep 28, 2012, 02:48 AM
Registered User
ZERO-Steadi470 Aerial photography system
Ready to fly(raw vidoe made by Chinese customer)
http://v.youku.com/v_show/id_XNDU1MTkwODcy.html
Last edited by zerouav; Sep 28, 2012 at 03:43 AM.
Sep 28, 2012, 04:32 AM
Registered User
Quote:
Originally Posted by zerouav View Post
ZERO-Steadi470 Aerial photography system
Ready to fly(raw vidoe made by Chinese customer)
http://v.youku.com/v_show/id_XNDU1MTkwODcy.html
Thanks for sharing the video.
Any information about the used camera?

Thanks in advance.
Sep 28, 2012, 06:52 AM
Registered User
Quote:
Originally Posted by zerouav View Post
ZERO-Steadi470 Aerial photography system
Ready to fly(raw vidoe made by Chinese customer)
http://v.youku.com/v_show/id_XNDU1MTkwODcy.html
this doesn't look like RAW video at all
Sep 28, 2012, 08:47 AM
Registered User
LiutaS's Avatar
It is very expensive compare to 2 similar multirotors like mini650 125$ and Ecilop 495$.
Sep 28, 2012, 09:15 AM
Registered User
Quote:
Originally Posted by LiutaS View Post
It is very expensive compare to 2 similar multirotors like mini650 125$ and Ecilop 495$.
Before you make a statement like that you should look at what each company is offering.

The Ecilop system still needs the following, and all you are getting is the frame. IMO that is expensive for that Ecilop frame

Sep 28, 2012, 09:47 AM
Registered User
LiutaS's Avatar
Shouldnt they call this treat ARTF Zerosteadi 470 ?
I thought its only for a frame. So not to bad than
How much only for a frame? Or there wont be that option?
As some people might be intrested building with them own electronics.
Sep 28, 2012, 12:10 PM
Registered User
I still didn't see a proper presentation of steadi470 like there is for ecilop. I am trying to decide between the two, but with steadi470 I just would have no idea what I'm buying. All the videos look stabilized with software.
Sep 28, 2012, 01:03 PM
Registered User
with ecilop you can get video without need of software stabilization.
Sep 29, 2012, 12:18 PM
Registered User
LiutaS's Avatar
So what about zero steadi frame? Is it posible to order one? And how much?
Sep 29, 2012, 02:07 PM
Registered User
Quote:
Originally Posted by LiutaS View Post
So what about zero steadi frame? Is it posible to order one? And how much?
It comes as a package. The frame, motors and all the electronics and can be ordered from your nearest dealer. I think they start shipping around the 10 October 2012. $1999. Have a look at the first post and you can see the specs.
Sep 29, 2012, 02:39 PM
Registered User
LiutaS's Avatar
Quote:
Originally Posted by robone View Post
It comes as a package. The frame, motors and all the electronics and can be ordered from your nearest dealer. I think they start shipping around the 10 October 2012. $1999. Have a look at the first post and you can see the specs.
I did asked only about frame. I dont want electronics, as i have everything, only need frame. Will u sell it? Or we must by full set?
Sep 29, 2012, 02:47 PM
Vulcan skyhook multirotor
Andre6553's Avatar
They only sell it as a kit think they 1ste want to build their repotation as a good frame before they make it open to everyone and then people start to blame maybe the frame when electronics may be at fault.

Give it time sure they will start selling the frame in time

i have spoke to zerouav support a while ago if you want the extra imu you need to send all your electronics back to zero uav, but they did not mention anything about selling frame alone.

The chinese clone almost everything i will give it not even 3months since they release it then goodluckbuy will have it in stock GB have already have a simmilar frame.
Last edited by Andre6553; Sep 29, 2012 at 02:52 PM.
Sep 29, 2012, 04:30 PM
Registered User
LiutaS's Avatar
GB have mini650, but nobody have manual for it, and even frame seller has no proper videos made, so hard to go for it. Price looks good, but still expecting steadycam frame with proper video like this one here whitch zerouav made. But again as its ARTF, its good for those who hate soldering
As i have all electronics, will have to wait, until they will release frame only.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product Zero UAV YS-X6 [Owners Thread] *Autopilot system for multirotors* Zero UAV Multirotor Drone Electronics 2461 Today 03:37 AM
Discussion The XAircraft X650/X650V MultiCopter (Aerial Photography & Video) owners thread xaircraft Multirotor Drone Talk 20834 Sep 22, 2016 08:27 AM
Discussion Zero UAV YS-X6 Owners Thread and Discussion fajar Multirotor Drone Electronics 2428 Mar 23, 2016 02:52 AM
Discussion Zero UAV Quad discussion & questions Zero UAV Multirotor Drone Electronics 103 Dec 14, 2012 03:52 AM
New Product Zero-Steadicam Frame - for Professional Aerial Filming (NEX5N RAW VIdeo + PDF) DiVidesign Multirotor Drone Talk 49 Oct 06, 2012 05:35 AM