Thread Tools
Old Oct 25, 2012, 08:49 PM
shelterock is offline
Find More Posts by shelterock
Fly, crash, rebuild.
Got the cf 380mm arms and another set of 320mm quad arms today. Should be a serious size with 380mm arms. Waiting on 306 servo.
Build will happened in the next couple weeks.
H
Sign up now
to remove ads between posts
Old Oct 26, 2012, 03:02 PM
SAMSAB is offline
Find More Posts by SAMSAB
Registered User
Quote:
Originally Posted by mongo56 View Post
Mostly finished. I still have to wire everything up.
hello
forgive my poor english.
is it possible to put the yaw motor under the métalic plate in order to get the mass under the rotation axis of the yaw movement?
it will be less difficult for the servo to move all this mass in rotation
thanks for the response.
Emmanuel
Old Oct 26, 2012, 04:36 PM
TheFernMan is offline
Find More Posts by TheFernMan
Too Many Thread Subscriptions
TheFernMan's Avatar
Quote:
Originally Posted by TheFernMan View Post
Turnigy H.A.L. Motor Mount Set


Should fit 14mm tubes. The H.A.L. has 14mm tube, just like the Talon V2.
Update to this, I ordered them and the fit great. Check this post of pictures. Order these for cheaper replacements.
But remember the one side hole is missing from these mount.

https://www.rcgroups.com/forums/showpost.php?p=23108396
Last edited by TheFernMan; Oct 26, 2012 at 04:55 PM.
Old Oct 29, 2012, 01:10 PM
shelterock is offline
Find More Posts by shelterock
Fly, crash, rebuild.
Quote:
Originally Posted by SAMSAB View Post
hello
forgive my poor english.
is it possible to put the yaw motor under the métalic plate in order to get the mass under the rotation axis of the yaw movement?
it will be less difficult for the servo to move all this mass in rotation
thanks for the response.
Emmanuel
Sure, I think a 28 or even 35 size motor will not interfere with the yaw mechanism. your bigger flat disk motors may not fit.
H
Old Oct 29, 2012, 01:11 PM
shelterock is offline
Find More Posts by shelterock
Fly, crash, rebuild.
Quote:
Originally Posted by TheFernMan View Post
Update to this, I ordered them and the fit great. Check this post of pictures. Order these for cheaper replacements.
But remember the one side hole is missing from these mount.

https://www.rcgroups.com/forums/showpost.php?p=23108396
Good to know. seems they are thicker, and therefore heavier, but certainly cheaper.
H
Old Oct 29, 2012, 05:35 PM
TheFernMan is offline
Find More Posts by TheFernMan
Too Many Thread Subscriptions
TheFernMan's Avatar
Quote:
Originally Posted by shelterock View Post
Good to know. seems they are thicker, and therefore heavier, but certainly cheaper.
H
These are actually 3 grams lighter.
Old Oct 31, 2012, 07:02 PM
bigfella65 is offline
Find More Posts by bigfella65
Registered User
Does anyone know where I can purchase the plastic ball links from? I wiped out on the tail and it stripped the thread from one of the plastic ball links....thanks.
Old Nov 01, 2012, 07:42 AM
shelterock is offline
Find More Posts by shelterock
Fly, crash, rebuild.
Quote:
Originally Posted by bigfella65 View Post
Does anyone know where I can purchase the plastic ball links from? I wiped out on the tail and it stripped the thread from one of the plastic ball links....thanks.
I would look up Dubros catalog. They are kings of small plastic parts and carry a host of plane, car and other rc products. I know ball links are included.
Good luck,
H
Old Nov 01, 2012, 12:11 PM
chewytm is offline
Find More Posts by chewytm
Registered User
Hi,

If anyone is interested, here are some buddy codes for things related to this tri-copter

TGY-306 Servo : http://www.hobbyking.com/buddy.asp?c...E-6D1FF2D1AE98

Camera platform: http://www.hobbyking.com/buddy.asp?c...4-4EFD-AF2E-27

Extended tubes: http://www.hobbyking.com/buddy.asp?c...2-BDDDAAF01572

Tube mount: http://www.hobbyking.com/buddy.asp?c...A-D6DB27255631

chewy
Old Nov 02, 2012, 01:10 PM
shelterock is offline
Find More Posts by shelterock
Fly, crash, rebuild.
for those of us flying the KK2 board, there is a new firmware out on the KK2 rcgroups thread. Not yet uploaded to lazyzero's DB but, I flashed it and it works. Auto-level springs back like a taught rubber band.
H
Old Nov 02, 2012, 05:05 PM
bigfella65 is offline
Find More Posts by bigfella65
Registered User
Not having much luck finding suitable ball links, there either to small or to large...
Old Nov 02, 2012, 05:11 PM
chewytm is offline
Find More Posts by chewytm
Registered User
bigfella,

Lots of ball links here: http://www.hobbyking.com/hobbyking/s...eli_Parts.html

Maybe some will suit?

chewy
Old Nov 02, 2012, 09:59 PM
shelterock is offline
Find More Posts by shelterock
Fly, crash, rebuild.
Quote:
Originally Posted by bigfella65 View Post
Not having much luck finding suitable ball links, there either to small or to large...
Have you looked up tower hobbies. They're pretty good on small parts.
What's the diameter of the ball links?
H
Old Nov 02, 2012, 11:08 PM
bigfella65 is offline
Find More Posts by bigfella65
Registered User
Quote:
Originally Posted by shelterock View Post
Have you looked up tower hobbies. They're pretty good on small parts.
What's the diameter of the ball links?
H
4.5mm
Old Nov 02, 2012, 11:11 PM
bigfella65 is offline
Find More Posts by bigfella65
Registered User
Quote:
Originally Posted by chewytm View Post
bigfella,

Lots of ball links here: http://www.hobbyking.com/hobbyking/s...eli_Parts.html

Maybe some will suit?

chewy
Been thru that lot nothing suits, have been checking heli parts hoping to find something but nothing yet.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Talon V2 or F450 Frame? solars Multirotor Talk 28 Nov 13, 2015 05:55 PM
New Product Turnigy Talon Carbon Fiber Quadcopter Frame CrashingDutchman Multirotor Talk 510 Jan 20, 2015 02:05 AM
Sold Turnigy Talon V2 Frame $30 / shipped **PRICE REDUCED pefozzy Aircraft - Electric - Multirotor (FS/W) 5 Sep 15, 2012 05:21 PM
For Sale Turnigy Talon Quad Frame V1 penz83 Aircraft - Electric - Multirotor (FS/W) 2 Jun 03, 2012 06:17 PM
Sold universal quad frame and tricopter frame dr rc Aircraft - Electric - Multirotor (FS/W) 4 Mar 07, 2012 08:26 PM