New Products Flash Sale
Thread Tools
Old Oct 15, 2012, 07:13 AM
shelterock is offline
Find More Posts by shelterock
Fly, crash, rebuild.
Quote:
Originally Posted by TheFernMan View Post
Yes it is but its more expensive. The one i link should be very similar. I bought a few and will test. I have two broke motor mounts to replace and the Talon V2 mounts you linked are more money.

Talon V2 mounts $8.83 Buy three of these and its $26.49
HAL mounts $ 2.85* with Buddy Code. Buy three of these and its $8.55

Big Difference i think
These appear to have no holes drilled on the side to mount the landing gear to. I think diameter wise you're good but no landing gear mount could be solved with a central heli type landing gear.
H
Sign up now
to remove ads between posts
Old Oct 15, 2012, 09:58 AM
TheFernMan is offline
Find More Posts by TheFernMan
Too Many Thread Subscriptions
TheFernMan's Avatar
Quote:
Originally Posted by shelterock View Post
These appear to have no holes drilled on the side to mount the landing gear to. I think diameter wise you're good but no landing gear mount could be solved with a central heli type landing gear.
H
Yup that's what i plan to do. Use a 600 heli skid
My carbon fiber legs are gone from hard hops on concrete anyways lol
Old Oct 15, 2012, 11:09 AM
shelterock is offline
Find More Posts by shelterock
Fly, crash, rebuild.
Quote:
Originally Posted by TheFernMan View Post
Yup that's what i plan to do. Use a 600 heli skid
My carbon fiber legs are gone from hard hops on concrete anyways lol
I'd like to see a detailed picture of how you attach the skids and possibly what skid you bought.
H
Old Oct 15, 2012, 11:29 AM
TheFernMan is offline
Find More Posts by TheFernMan
Too Many Thread Subscriptions
TheFernMan's Avatar
Quote:
Originally Posted by shelterock View Post
I'd like to see a detailed picture of how you attach the skids and possibly what skid you bought.
H
Well heres my quad with 500 skid

Buddy Codes for 600 Skid parts!!

Skid

Skid Pipe

Skid Nuts
Old Oct 17, 2012, 12:27 AM
thwaitm is offline
Find More Posts by thwaitm
Team WarpSquad
A little lunchtime buzzin'... watching before you eat is better though I think.
Jello and high yaw rates might make this a little tough to watch...

Video 1 was a bit useless
so Video 2
RC Turnigy Tricopter next to Tokyo's Rainbow Bridge V2 (5 min 35 sec)



and Video 3
RC Turnigy Tricopter next to Tokyo's Rainbow Bridge V3 (0 min 0 sec)
Old Oct 19, 2012, 01:52 AM
R.T.K.F is offline
Find More Posts by R.T.K.F
Return To Kit Form
R.T.K.F's Avatar
Gents,

Found something when modeling up the talon tricopter. The geometry for the servo to tail linkage was a bit out.(see pic)

Installing a spacer (M3 washer) should help in correcting the error and reduce stress on you servo..
Old Oct 19, 2012, 10:48 AM
TheFernMan is offline
Find More Posts by TheFernMan
Too Many Thread Subscriptions
TheFernMan's Avatar
Quote:
Originally Posted by R.T.K.F View Post
Gents,

Found something when modeling up the talon tricopter. The geometry for the servo to tail linkage was a bit out.(see pic)

Installing a spacer (M3 washer) should help in correcting the error and reduce stress on you servo..
very cool, how did you draw this so accurate? Used SolidWorks?
Old Oct 19, 2012, 04:50 PM
shelterock is offline
Find More Posts by shelterock
Fly, crash, rebuild.
Anybody experiement with a body on this tri. a 250/450 size canopy.

I see the IDEAFLY IFLY-4 Canopy as a possibility.
http://www.hobbyking.com/hobbyking/s...anopy_Set.html

If anyone has pictures with their canopy adaptation, I'm interested.
H
Old Oct 19, 2012, 09:09 PM
R.T.K.F is offline
Find More Posts by R.T.K.F
Return To Kit Form
R.T.K.F's Avatar
Quote:
Originally Posted by TheFernMan View Post
very cool, how did you draw this so accurate? Used SolidWorks?
Bingo.. Solidworks
Old Oct 20, 2012, 10:25 AM
shelterock is offline
Find More Posts by shelterock
Fly, crash, rebuild.
Play it loud and with lots of Bass!

Turnigy Talon Space Taxi By Stefan Raab!
Talon Space Taxi Straight to Mother Earth to Make it Funky (2 min 45 sec)
Old Oct 20, 2012, 03:36 PM
eirikso is offline
Find More Posts by eirikso
Registered User
Just posted a description of how I fixed the sloppy tail servo mechanism.

Simply added TWO thrust bearings and it turned into a perfectly tight and stable mechanism:
http://eirikso.com/2012/10/20/hackin...lon-tricopter/
Old Oct 20, 2012, 07:26 PM
RobJCook is offline
Find More Posts by RobJCook
Registered User
RobJCook's Avatar
Quote:
Originally Posted by eirikso View Post
Just posted a description of how I fixed the sloppy tail servo mechanism.

Simply added TWO thrust bearings and it turned into a perfectly tight and stable mechanism:
http://eirikso.com/2012/10/20/hackin...lon-tricopter/
Excellent.

And nice blog link, erikso.
Old Oct 20, 2012, 09:40 PM
R.T.K.F is offline
Find More Posts by R.T.K.F
Return To Kit Form
R.T.K.F's Avatar
Quote:
Originally Posted by eirikso View Post
Just posted a description of how I fixed the sloppy tail servo mechanism.

Simply added TWO thrust bearings and it turned into a perfectly tight and stable mechanism:
http://eirikso.com/2012/10/20/hackin...lon-tricopter/
Well done.. that was the next issue needing to be fixed.
Old Oct 21, 2012, 12:55 AM
3rdeyepro is offline
Find More Posts by 3rdeyepro
Hovership
3rdeyepro's Avatar
I had been considering getting some thrust bearings. Good to see someone else tried it. Just ordered some.
Old Oct 21, 2012, 12:10 PM
jimjim is offline
Find More Posts by jimjim
Registered User
Finally have my tri together, I'm very much a newbie, but the build went ok, just took my time. One small problem though, I can't get airborne. I'm giving it near full throttle before the right arm starts to lift then I have to stop as the props on the other sides are getting close to the ground.

Prop direction appears is ok, must be something simple I'm missing, any ideas?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Talon V2 or F450 Frame? solars Multirotor Talk 28 Nov 13, 2015 05:55 PM
New Product Turnigy Talon Carbon Fiber Quadcopter Frame CrashingDutchman Multirotor Talk 510 Jan 20, 2015 02:05 AM
Sold Turnigy Talon V2 Frame $30 / shipped **PRICE REDUCED pefozzy Aircraft - Electric - Multirotor (FS/W) 5 Sep 15, 2012 05:21 PM
For Sale Turnigy Talon Quad Frame V1 penz83 Aircraft - Electric - Multirotor (FS/W) 2 Jun 03, 2012 06:17 PM
Sold universal quad frame and tricopter frame dr rc Aircraft - Electric - Multirotor (FS/W) 4 Mar 07, 2012 08:26 PM