Thread Tools
This thread is privately moderated by DLGjunkyard, who may elect to delete unwanted replies.
Aug 22, 2012, 10:28 PM
Suspended Account
Thread OP
Discussion

Short kit contents


Itemizing components of a composite short kit in pictures for references


Short kit ingredients
ZONE V2 2P Highload 60 wing cores and EDGE tail cores [complete with beds]

-2 pcs Kevlar LE material 3 ft x 3/4'wide [complete with transfer tape adhesion]

-4 pcs HM .067dia. carbon fibre wing spars

-2pc pre-cured 1/4'x 24'x.006 uni-carbon fibre tail feather spars

-2 pcs kevlar tip reinforcement patches [1.7 oz kevlar]

1 pc 1/2' x 24' kevlar tail hinge material [complete with transfer tape adhesion]

-1 pc 3/8' x 36' 1.6 oz glass for tail feather LE`s [complete with transfer tape adhesion]

-1 pc 14 mil Mylars 4ft x 2ft

-1pc 45' x 48' 1.6 oz/yrd [balanced] Fibre glass

-Wing mounting utilizes binder posts and bolts [3 lengths provided with matching bolts]

- 1 pc 3" x 34" strip of 1.7 oz kevlar hinge material [bias cut]

-Kevlar pods, carbon reinforcement in boom tenon and pylon areas
Made with MGS epoxy resin and post cured to 140 f
.620 -.625 O.D. on boom tenon [male]
average weight for the pods are between 26-29 grams
with a matching boom total average weight is between 44-48 grams
This design was made to fit most commonly used mini servo`s with a preference for the dymond d4.7 or hitec hs35 or similar.
Jr 285 are my servo of choice.

-CARBON FIBRE tail booms, Hand rolled using HM carbon fibre layered in light fibre glass
Large end has a .625 Inner diameter tapering down the .350 ID over a 31 inch length.
These booms weigh in between 15-17 grams for a 31 inch length and unbelievably stiff for the weights
-dimensions are designed to fit above mentioned pod


Items that I have not included in this kit
- Mounting of the horizontal stab has not been considered
- resin [epoxy or similar]
-push rods and/or pull strings and related parts
-servo connector for wing servos
-control horns for all surfaces
- radio gear, batteries etc


A few of the above items that are needed can be bought from one source . Give them a peak http://www.rcbuilder.com/Mounts-Horizontal_c_18.html

http://www.rcbuilder.com/Tail-Contro...ware_c_12.html

http://www.rcbuilder.com/Throwing-Blades_c_16.html
Last edited by DLGjunkyard; Apr 02, 2013 at 04:18 PM.
Sign up now
to remove ads between posts
Feb 18, 2013, 07:12 PM
saint albans, wv

junkyard?


Hello, I got your name and web link from Curtis Suter. I just read your posting and pics of the dlg that you must be selling....not sure from the post. Orginally I was looking for someone to cut some cores for a dlg, at least two sets, I have purchased two kits of the Topsky and would like to bag some wings of my own for same plane...maybe you can help. I don't think the airfoil is all that critical but maybe you don't agree...also these parts that you are making for your dlg...do you have a selling price at this time. I purchased the video from curtis and realized cutting these cores is to much for me...please let know. cliff bryan
Feb 18, 2013, 07:47 PM
Suspended Account
Thread OP
Hi Cliff. I sent you a Personal message Thanks
Nov 05, 2013, 12:31 AM
Registered User
Are the pod and booms for the SGII still available


Quick Reply
Message:
Thread Tools