my tamiya cc-01 build. - RC Groups
Thread Tools
Aug 22, 2012, 10:03 AM
tater salad
nick84's Avatar
Discussion

my tamiya cc-01 build.


i bought some scale stuff today at walmart.

let me know what you think.
Sign up now
to remove ads between posts
Aug 22, 2012, 10:44 PM
Romans 8:28
peacekeeper94's Avatar
Very nice!
Sep 11, 2012, 09:08 PM
Registered User
WOW thats cool i have the cc01 mog and it great it works so good in the mud
Dec 05, 2012, 10:38 AM
Registered User
is that a hard body?
Dec 13, 2012, 01:13 AM
tater salad
nick84's Avatar
The land rover is an hard body got it from an nikko rc truck.
Dec 30, 2012, 04:51 PM
Registered User
i have a tamiya cc01 too and i am a bit tired of going slow i am thinking about putting an ansmann clash 23 turn motor in it do you think that wouldbea good idea.
Dec 30, 2012, 09:27 PM
oh that guy
I would make sure to replace all the bushings with bearing first if they havent been already. Other mods I would do is drill the holes for the gearbox all the way through and install bolts with nuts to hold the gear cover on better and convert it to front steer by cutting off the flat front and building a servo bracket, making new links and swapping the hubs around. These are the most common mods for the cc01 and improves durability and performance of the truck. Other than that it should handle a 23t motor
Dec 31, 2012, 05:53 AM
Registered User
thanks for the advise i will see if i can do that because i have next to no experience in the modeling world and this is my first propper rc car
Dec 31, 2012, 08:20 AM
Registered User
have you done these mods to your cc01
Dec 31, 2012, 05:25 PM
oh that guy
I did to my first one but I no longer own the truck. I have drilled out tje gearbox holes on the one I have now and added bearings. It is worth the time. I ran a 19 turn in the first one a few times. They can be a little unruly at those speeds
Dec 31, 2012, 06:28 PM
Registered User
i know you have to be careful when cornering fast otherwise you can flip it
Dec 31, 2012, 06:30 PM
Registered User
also do you think i need to watterproof it to drive it in the snow
Dec 31, 2012, 08:36 PM
oh that guy
It would be a really good idea to waterproof it. Snow has a bad habit of getting into electronics and melting. There are several ways to go about water proofing electronics
Jan 01, 2013, 05:29 AM
Registered User
i heard you can put a balloon round the battery ,put the esc and receiver in a waterproof box and then take the top off the servo and put plenty of greese in the gearbox to stop it getting to the electronics


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale Tamiya CC-01 scale Unimog luvmykids2 Cars - Trucks and Parts (FS/W) 7 Aug 27, 2012 10:18 AM
Sold TRADED/ GONE Tamiya CC-01 4x4 UNIMOG 406 RTR rc_dude99 Cars - Trucks and Parts (FS/W) 1 May 13, 2012 03:19 PM
Sold Tamiya 1/10 Jeep Wrangler (YJ) CC-01 andTamiya Cayenne S Transsyberia '07 DF-01 Kit mooneypilot Cars - Cars and Parts (FS/W) 0 Mar 28, 2012 04:51 PM
Sold Tamiya 1/10 Jeep Wrangler (YJ) CC-01 Kit (PRICE REDUCED) mooneypilot Cars - Cars and Parts (FS/W) 4 Mar 01, 2012 12:03 AM