Thread Tools
Old Aug 23, 2012, 09:04 AM
rimshotcopter is online now
Find More Posts by rimshotcopter
Registered User
rimshotcopter's Avatar

Mini-Mollie


Here is one of my Scratchbuilt I titled, Mini-Mollie.

Specs:

AUW : 1kg
Battery : 4s 2200mah
Motors : RCTimer 2830-8 1300KV
ESC : RCTimer 30amps flashed with SimonK firmware
Flight Controller: MultiWiiCopter version 2.1

MiniMollie MWC 2.1 Upgrade (1 min 45 sec)
Sign up now
to remove ads between posts
Old Aug 23, 2012, 02:10 PM
2400RDR is online now
Find More Posts by 2400RDR
Out of helis, sanity returning
Quote:
Originally Posted by rimshotcopter View Post
Here is one of my Scratchbuilt I titled, Mini-Mollie.
Very nice- I like it. I can see where the fore/ aft CG would have to be set pretty carefully on this type of design.

Rick
Old Aug 23, 2012, 02:29 PM
rimshotcopter is online now
Find More Posts by rimshotcopter
Registered User
rimshotcopter's Avatar
Quote:
Originally Posted by 2400RDR View Post
Very nice- I like it. I can see where the fore/ aft CG would have to be set pretty carefully on this type of design.

Rick
Thank you Rick, here is a little margin for error but not MUCH.
Old Aug 23, 2012, 04:36 PM
thepelell is offline
Find More Posts by thepelell
Registered User
foldable H quad, built with spare alu squares, 5mm plywood as plates. 60cm mtm distance.
Emax Gt2215/09 motors, flashed esc, 9x4.5 apc props, 4s lipo, AQ50 Pro flight board.





fits easily in my scooter case



here's first test flight
AQ50 H quad (4 min 40 sec)
Old Aug 23, 2012, 04:53 PM
bmoke is offline
Find More Posts by bmoke
Registered User
Quote:
Originally Posted by thepelell View Post
foldable H quad, built with spare alu squares, 5mm plywood as plates. 60cm mtm distance.
Emax Gt2215/09 motors, flashed esc, 9x4.5 apc props, 4s lipo, AQ50 Pro flight board.
Very nice. Your video is so smooth.
Old Aug 23, 2012, 05:05 PM
thepelell is offline
Find More Posts by thepelell
Registered User
Quote:
Originally Posted by bmoke View Post
Very nice. Your video is so smooth.
thanks, i train a lot to be as smooth as possible.. .and the AQ50 is a very good board for smoothness.
Old Aug 23, 2012, 07:54 PM
tippytoe is offline
Find More Posts by tippytoe
Registered User
Rimshotcopter,I really like what you've done here.Very cool! I think the canopy and tail set off your copter. Flies nice too!
Old Aug 23, 2012, 07:56 PM
rimshotcopter is online now
Find More Posts by rimshotcopter
Registered User
rimshotcopter's Avatar
Quote:
Originally Posted by tippytoe View Post
Rimshotcopter,I really like what you've done here.Very cool! I think the canopy and tail set off your copter. Flies nice too!
thank you, she has seen many revisions but I believe this is the last one.
Old Aug 24, 2012, 07:18 AM
samlikespad is offline
Find More Posts by samlikespad
Registered User

SPAD Quad


When the quad bug bit me, I wanted to do something different and decided to give it a try using SPAD building methods. First one was named the "correXcopter" which was a 100% SPAD frame with 4mm triangular coro booms and 6mm plates in the middle. Being a first timer, couldnt do much at the "flying your quad" side. Mean time saw the flitetest clip of Hcopter. Next up was to build the "cooreHcopter" . Though crashed many times, got used to it and am in love with these bugs now. Pics and videos below.

correXcopter:
Corrocopter Maiden (1 min 36 sec)


correHcopter:
correHcopter Thursday flight (3 min 33 sec)


Build log at http://spadworld.net/forum/viewtopic...ht=corrocopter
Old Aug 24, 2012, 09:50 AM
JEGO88 is offline
Find More Posts by JEGO88
Registered User
JEGO88's Avatar

Quadcooter frame


My foldable quad built for travelling.
62 cm MtM
35cm x 18cm (folded)
1380g auw
11" prop
Old Aug 24, 2012, 04:05 PM
Mortimer is offline
Find More Posts by Mortimer
Registered User
Mortimer's Avatar
Quote:
Originally Posted by JEGO88 View Post
My foldable quad built for travelling.
Very interesting for a first post.
I like very much your concept and your construction.
Congratulations.
Old Aug 24, 2012, 07:29 PM
JEGO88 is offline
Find More Posts by JEGO88
Registered User
JEGO88's Avatar
Quote:
Originally Posted by Mortimer View Post
Very interesting for a first post.
I like very much your concept and your construction.
Congratulations.
Thanks Mortimer. I got the idea from the H-frame and
adjusted the lenght to make it as compact as possible.
Old Aug 25, 2012, 06:50 AM
malcr001 is offline
Find More Posts by malcr001
Registered User
malcr001's Avatar
JEGO88 Your quad looks nice and compact. I would maybe try and go a step further and make the landing gear foldable somehow?
Old Aug 25, 2012, 09:11 AM
deno6031 is offline
Find More Posts by deno6031
Registered User
deno6031's Avatar
Here is my latest scratchbuild quadrocopter, it is made for fpv and lifting a gopro.it is a little one, motor to motor is about 37cm.

it is made of 2mm alu plates and 13x13mm alu arms. the frame weight about 280grams.my AUW is 1250grams

my setup is written under the videos: here are some

that how my little one flies,

fpv-rüzgarsız bir gün (6 min 36 sec)


and this is with the 127 degree angle, no props on the video

fpv-gopro 2 on 1080p medium FOV (no props in sight) (3 min 4 sec)
Last edited by deno6031; Sep 11, 2012 at 03:48 AM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Show us your RC orders! Lets see how much we spend :O Koo Electric Plane Talk 60 Nov 25, 2016 12:32 AM
Discussion Show Us your US Navy Ship ! Chophop Life, The Universe, and Politics 92 Jul 16, 2016 05:49 PM
Discussion Show us your favorite hi-res FPV video compuatic FPV Talk 10 Jan 04, 2015 02:38 AM
Discussion Show us your workshop bazman The Builders Workshop 41 Jul 21, 2014 11:16 PM
Discussion Show Us Your Hoverthings FPV Frame scrape Multirotor Talk 2149 Apr 18, 2014 06:06 PM