Thread Tools
Aug 24, 2012, 01:11 PM
Registered User
Aviefly's Avatar
Nice
Sign up now
to remove ads between posts
Aug 24, 2012, 01:57 PM
Closed Account
Got my delivery confirmation at 1AM. Looks like it will be here Monday. Awesome build thread. Any plans for a build video in the future? I've been flying my Yak to death, and can't wait to fly the Extravaganva.
Aug 24, 2012, 02:21 PM
Registered User
Has anybody thought about running a cf strip down the length of the aileron to make it 100% straight. BTW just started on my red one. Not that the ailerons are grossly warped, they're not, in fact they are really good., but there is the slightest bow to them. i've done it with other EPP wings and it really works well with minimal weight gain. Pain in the butt to do but I'm throwing a larger motor on so I think I'll go ahead. Going to be a very nice looking plane.
Aug 24, 2012, 02:36 PM
Closed Account
Quote:
Originally Posted by cdee
if any one has any special requests for pics or insight or anything else just let me know.
.
cdee
.
What is the length? Wondering for transport reasons.
Aug 24, 2012, 02:42 PM
Closed Account
Quote:
Originally Posted by alchem
What is the length? Wondering for transport reasons.
Nevermind, got it from PDF.
Aug 24, 2012, 04:55 PM
Shore Huckin'
KE Spin's Avatar
Quote:
Originally Posted by stevelmaa
Has anybody thought about running a cf strip down the length of the aileron ....
Steve,

Yes, thought about it but I'm getting good aileron response right now.

One thing I did do was add CF wing struts. This took out some wing flex and a little twist between the wing and the fuselage. I did notice that the glue had released on part of one of the CF spars in the wing so I re-glued it and added the struts because I do a fair amount of flying in very windy conditions.

Overall I saw a small yet noticeable improvement on what was already a good flying plane.
Aug 24, 2012, 05:45 PM
Registered User
Good idea. I'll keep an eye on that. I did add the carbon ribbon, super straight and very stiff now. Still a pain to do since you have to cut 2 separate slits very close together, pull out the foam and wick in with thin ca to avoid deforming the aileron. Plus being very careful not to cut all the way through the aileron. But doable if careful.
Aug 24, 2012, 06:28 PM
Registered User
Aviefly's Avatar
Pics?
Aug 24, 2012, 07:55 PM
Shore Huckin'
KE Spin's Avatar
I was thinking of just running a thin strip along the trailing edge of the aileron. You have about 1/8" thickness of aileron to work with so a nice little thin strip of CF might work nicely.

Flight update:
Tonight I did a low ke pass (3 - 4" off the ground) across the black top. One of the guys said, "That looks nice...how hard is it to hold", so I took my right and off the transmitter and put it up in the air. He gawked and said, "man that's cool!". I had to agree with him. Don't get me wrong, I'm not trying to brag, the plane is just that good.
Aug 24, 2012, 08:19 PM
Registered User
Quote:
Originally Posted by Aviefly
Pics?
Not the best pics.
Aug 24, 2012, 10:37 PM
Shore Huckin'
KE Spin's Avatar
Steve,

Looks great! Should really stiffen up the ailerons.

Another flight update:
I tried an 11 x 4.7 APC slow flyer and was very pleasantly surprised by how it well it worked. Motor, batteries and ESC came down much cooler as compared to when I used the 12 x 6 apc thin electric prop.

NOTE: Watch the aileron differential. Use 10% more UP than Down. Really makes for a nice axial and fast rolling circle.
Aug 24, 2012, 11:32 PM
Registered User
Thanks for that aileron differential tip.
Aug 24, 2012, 11:50 PM
Suspended Account
Quote:
Originally Posted by KE Spin
I was thinking of just running a thin strip along the trailing edge of the aileron. You have about 1/8" thickness of aileron to work with so a nice little thin strip of CF might work nicely.

Flight update:
Tonight I did a low ke pass (3 - 4" off the ground) across the black top. One of the guys said, "That looks nice...how hard is it to hold", so I took my right and off the transmitter and put it up in the air. He gawked and said, "man that's cool!". I had to agree with him. Don't get me wrong, I'm not trying to brag, the plane is just that good.
Originally read this as you handing him the TX. Now that would be cool!
Aug 25, 2012, 12:02 AM
Shore Huckin'
KE Spin's Avatar
Haven't passed the TX to anyone just yet but tonight's flights were so good that I might pass it around a little this weekend now that I have got things just the way I like.

Did I mention that this is one very fine flying plane.

Once again, great job Telink and Twisted Hobbys.
Aug 25, 2012, 12:05 AM
Suspended Account
id be glad to try it out . Going to PA on the 7-9th?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Telink / Twisted Hobbys Extra Slick SU-29 LPU Monroe, MI bcucoach2 Aircraft - Electric - Airplanes (FS/W) 7 Jul 12, 2012 10:59 AM
Sold NYC LPU: Brand New Built 33" EPP Extra 330 SC livinma1 Aircraft - Electric - Airplanes (FS/W) 9 May 30, 2012 07:19 AM
Sold 3D Hobby Shop 48" Extra 330 EPP FlyWW1 Aircraft - Electric - Airplanes (FS/W) 4 May 16, 2012 08:09 PM
Sold 3D Hobby Shop 48" Extra 330 EPP FlyWW1 Aircraft - Fuel - Airplanes (FS/W) 4 May 16, 2012 10:45 AM