RcTiger MT3515 400kv 6s Motor For Heavy Lift Setups - RC Groups
Thread Tools
Aug 16, 2012, 08:16 AM
Z06 Tony's Avatar

RcTiger MT3515 400kv 6s Motor For Heavy Lift Setups

We now stock RcTiger MT3515 400kv 6s Motor For Heavy Lift Setups at
Rc-Drones-> http://rc-drones.com/mt3515-15.php

Here is an X8 build I did with them-> https://www.rcgroups.com/forums/show....php?t=1696580

Rc-Drones Kong8-6S Octocopter w/DJI Innovations WKM/Wookong-M Flight Controller+400kv RcTiger Motors (1 min 8 sec)

Here is a hex I did-> http://www.z06tony.com/Other/HexaKon...8818&k=hK46WWS

Rc-Drones HexaKong XL-6S Heavy Lift Hex/Hexacopter On 6s w/Graupner 14" props 10.5lb Payload (1 min 0 sec)
Sign up now
to remove ads between posts
Aug 16, 2012, 08:13 PM
Registered User
Great stability. To bad I already bought six 3515's from Monto.

Is your hex using a wkm? Did you have to tweak the settings much?

I'm not finished building my hex with the 3515's. Its 800mm and I'm going to use 15 x 4 props for now. I'm going with zeroUAV YS-X6 for the FC, which I hope I don't regret. It is definitely a work in progress with new firmware coming out every week or so.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log Rc-Drones X8 Kong8 6s Heavy Lift OctoCopter Z06 Tony Scratchbuilt Multirotor Drones 45 Aug 23, 2013 08:26 AM
Discussion Cinestar 8 with RCTiger MT3515 motor JeffY Multirotor Drone Talk 5 Jul 25, 2012 04:16 PM
Discussion Best motors for HEAVY lifting (quad/hex DSLR rig) brendon7800 Multirotor Drone Talk 0 Mar 30, 2012 09:39 PM
Discussion What motor to use for Heavy lift Octo gtxkid Multirotor Drone Talk 7 Mar 15, 2012 07:38 AM
Most powerful motor/ESC setup for heavy lifting? Greg McNair Electric Heli Talk 15 Jan 06, 2004 02:07 PM