The Official Teen Chit Chat Thread (Always Off Topic) - Page 583 - RC Groups
Thread Tools
This thread is privately moderated by Alex Schauer, who may elect to delete unwanted replies.
Jan 24, 2013, 03:13 PM
I think I'm inverted. Maybe.
acetech09's Avatar
Quote:
Originally Posted by RCgirl383
Its brushless
Open it up.

If it wasn't tried very thoroughly afterwards, chances are it's most likely ruined.

The problem will be corrosion on the stator, maybe corrosion on the case as well. But if you see any rust inside the motor it would probably be cheaper to replace it than to try to fix it, since a new stator would mean a new wind.
Jan 24, 2013, 03:26 PM
It'll be fineee...
RCgirl383's Avatar
Quote:
Originally Posted by acetech09
Open it up.

If it wasn't tried very thoroughly afterwards, chances are it's most likely ruined.

The problem will be corrosion on the stator, maybe corrosion on the case as well. But if you see any rust inside the motor it would probably be cheaper to replace it than to try to fix it, since a new stator would mean a new wind.
Ok ill open it up, ill probably end up getting a new one
Jan 24, 2013, 03:26 PM
AMA Another Mans Airplane
cale10's Avatar
Quote:
Originally Posted by RCgirl383
Ok ill open it up, ill probably end up getting a new one
what motor is it?
Jan 24, 2013, 04:03 PM
It'll be fineee...
RCgirl383's Avatar
Quote:
Originally Posted by cale10
what motor is it?
The one on the the parkzone extra 300. I just tested it again to see if it would work. And it did! Haha just needed to sit in the basement for a few months I guess
Jan 24, 2013, 04:04 PM
It'll be fineee...
RCgirl383's Avatar
Im gettin low with my micro edf wing
Home made Micro EDF Wing (1 min 22 sec)
Jan 24, 2013, 04:06 PM
Suspended Account
Quote:
Originally Posted by RCgirl383
Im gettin low with my micro edf wing http://m.youtube.com/watch?v=8ks37pxkM7M
Lower!
Jan 24, 2013, 04:34 PM
ski bum in training
addictedtoplanes's Avatar
Inverted! 12" AGL!(Above Ground Level)
Jan 24, 2013, 04:40 PM
Registered User
hunhunter's Avatar
Quote:
Originally Posted by DJO
Alright so I really am looking into the 3DHS 48" Edge, it would be something like this:

Airframe $150
Motor $50
ESC $30
Servos $90

Hopefully all together I can get it under $350 but IDK...



Dan
go with the extreme flight 48 edge. best electric ive ever flown. you wont regret it I promise.
Jan 24, 2013, 04:41 PM
DJO
DJO
"Yo, that's a thermal"
DJO's Avatar
Quote:
Originally Posted by hunhunter
go with the extreme flight 48 edge. best electric ive ever flown. you wont regret it I promise.
How much is it?
Jan 24, 2013, 04:45 PM
Registered User
hunhunter's Avatar
http://www.extremeflightrc.com/html/48edge.html a little more than the 3dhs but a MUCH better plane. and it looks a lot better (:
Jan 24, 2013, 04:46 PM
Team Aztech Aeromodels!
zmonster97's Avatar
Quote:
Originally Posted by DJO
How much is it?
You probably wouldn't want it. Its $180 but uses 4s batteries.
Jan 24, 2013, 04:48 PM
DJO
DJO
"Yo, that's a thermal"
DJO's Avatar
Quote:
Originally Posted by hunhunter
http://www.extremeflightrc.com/html/48edge.html a little more than the 3dhs but a MUCH better plane. and it looks a lot better (:
Ummm I don't think so. I'd like to stay with 3DHS personally, there's no reason for me to switch have you flown both planes? The 48 from both 3DHS and EF?



Dan
Jan 24, 2013, 04:48 PM
Registered User
hunhunter's Avatar
Quote:
Originally Posted by zmonster97
You probably wouldn't want it. Its $180 but uses 4s batteries.
not if you have the right setup.. I fly mine on 3 cell, and he doesn't fly hardcore 3d,
Jan 24, 2013, 04:50 PM
Registered User
hunhunter's Avatar
Quote:
Originally Posted by DJO
Ummm I don't think so. I'd like to stay with 3DHS personally, there's no reason for me to switch have you flown both planes? The 48 from both 3DHS and EF?



Dan
yes I owned both. I also owned the 3dhs 47 edge. to be honest with you id rather fly that ef edge than a gs airframe. its that good of a plane.
Jan 24, 2013, 04:52 PM
DJO
DJO
"Yo, that's a thermal"
DJO's Avatar
A few things I don't like right off the bat. First, it looks like one heck of a complicated build. I took a quick skim through the manual and they're talking 5 and 30 minute epoxy, goop glue and such... not sure if I want to go through all that. Second, carbon landing gear! Might be better off using the spring stuff

And yeah buying 4S packs might be an issue for me.... I'll consider it though.



Dan


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion GENERAL CHIT CHAT - advice, videos, cool stuff, new toys, reports, articles, ideas AussieJarred Dynamic Soaring 1375 Nov 07, 2017 01:40 AM
Discussion Official Eflite UMX Mig 15 DF Owners Thread NitroCharged Micro EDF Jets and Power Systems 5755 Aug 25, 2017 12:21 PM
Contest Chit Chat Thread With one Rule: You must reply to poster above you and be relevant! HoaRC Chit Chat 25 Aug 08, 2013 02:48 AM
Discussion General Chit Chat...... Keenan smith RC Airliners (Commercial, Cargo, Troop Carrier) 38 May 28, 2012 06:03 PM